World Library  
Flag as Inappropriate
Email this Article

Pit (nuclear weapon)

Article Id: WHEBN0025965010
Reproduction Date:

Title: Pit (nuclear weapon)  
Author: World Heritage Encyclopedia
Language: English
Subject: Demon core, Plutonium, Improvised nuclear device, The Long Watch, Mark 13 nuclear bomb
Publisher: World Heritage Encyclopedia

Pit (nuclear weapon)

The "demon core", a plutonium pit utilized for criticality experiments and later used in Crossroads ABLE detonation. A re-creation of the 1945 criticality accident. The sphere of plutonium is surrounded by neutron-reflecting tungsten carbide blocks.
Precision plutonium foundry mold, 1959

The pit is the core of an implosion weapon – the fissile material and any neutron reflector or tamper bonded to it. Some weapons tested during the 1950s used pits made with U-235 alone, or in composite with plutonium,[1] but all-plutonium pits are the smallest in diameter and have been the standard since the early 1960s.

Pit designs

Christy pits

The pits of the first nuclear weapons were solid, with an urchin neutron initiator in their center. The Gadget and Fat Man used pits made of solid hot pressed material (at 400°C and 200 MPa in steel dies) half-spheres of 9.2 cm diameter, with a 2.5 cm internal cavity for the initiator. The gadget's pit was electroplated with 0.13 mm of silver; the layer, however, developed blistering and the blisters had to be ground and plated with gold leaf before the test. The Fat Man pit, and those of subsequent models, were all plated with nickel. A hollow pit was considered but ultimately rejected due to higher requirements for implosion accuracy.

Later designs used TOM initiators of similar design but with diameters of only about 1 cm. The internal neutron initiators were later phased out and replaced with pulsed neutron sources, and with boosted fission weapons.

The solid-cores were known as the "Christy" design, after Robert Christy who made the solid pit design a reality after it was initially proposed by Edward Teller.[2][3][4] Along with the pit, the whole physics package was also informally nicknamed "Christy['s] Gadget".[5]

Levitated pits

Efficiency of the implosion can be increased by leaving an empty space between the tamper and the pit, causing a rapid acceleration of the shock wave before it impacts the pit. This method is known as levitated-pit implosion. Levitated pits were tested in 1948 with Fat Man style bombs (Mark IV), and became obsolete with the advent of hollow pits.

The early weapons with a levitated pit had a removable pit, called an open pit. It was stored separately, in a special capsule called a birdcage.[6]

Hollow pits

During implosion of a hollow pit, the plutonium layer accelerates inwards, colliding in the middle and forming a supercritical highly dense sphere. Due to the added momentum, the plutonium itself plays part of the role of the tamper, requiring a smaller amount of uranium in the tamper layer, reducing the warhead weight and size. Hollow pits are more efficient than solid ones but require more accurate implosion; solid "Christy" pits were therefore favored for the first weapon designs. Following the war's end in August 1945, the laboratory focused back on to the problem of the hollow pit, and for the rest of the year they were headed by Hans Bethe, his group leader and successor to the theoretical division, with the hollow composite core being of greatest interest,[7] due to the cost of plutonium and trouble ramping up the Hanford reactors.

The efficiency of the hollow pits can be further increased by injecting a 50%/50% mixture of deuterium and tritium into the cavity immediately before the implosion, so called "boosting"; this also lowers the minimum amount of plutonium for achieving a successful explosion. The higher degree of control of the initiation, both by the amount of deuterium-tritium mixture injection and by timing and intensity of the neutron pulse from the external generator, facilitated the design of variable yield weapons.

Composite cores and uranium pits

At that time, plutonium-239 supply was scarce. To lower its amount needed for a pit, a composite core was developed, where a hollow shell of plutonium was surrounded with a hollow shell of then more plentiful highly enriched uranium. The composite cores were available for Mark 3 nuclear bombs by the end of 1947.[8] For example, a composite core for a Mark 4 bomb, the 49-LCC-C core was made of 2.5 kg of plutonium and 5 kg of uranium. Its explosion releases only 35% of energy of the plutonium and 25% of the uranium, so it is not highly efficient, but the weight saving of plutonium is significant.[9]

Another factor for considering different pit materials is the different behavior of plutonium and uranium. Plutonium fissions faster and produces more neutrons, but it was then more expensive to produce, and scarce due to limitations of the available reactors. Uranium is slower to fission, so it can be assembled into a more supercritical mass, allowing higher yield of the weapon. A composite core was considered as early as of July 1945, and composite cores became available in 1946. The priority for Los Alamos then was the design of an all-uranium pit. The new pit designs were tested by the Operation Sandstone.

The yield of a weapon can also be controlled by selecting among a choice of pits. For example, the Mark 4 nuclear bomb could be equipped with three different pits: 49-LTC-C (levitated uranium-235, tested in the Zebra test on 14 May 1948), 49-LCC-C (levitated composite uranium-plutonium), and 50-LCC-C (levitated composite).[10] This approach is not suitable for field selectability of the yield of the more modern weapons with nonremovable pits, but allows production of multiple weapon subtypes with different yields for different tactical uses. The early US designs were based on standardized Type C and Type D pit assemblies. The Mark 4 bomb used the Type C and Type D pits, which were insertable manually in flight. The Mark 5 bomb used Type D pits, with automated in-flight insertion; the W-5 warhead used the same. Its successor, the Mark 6 bomb, presumably used the same or similar pits.

The pit can be composed of plutonium-239, plutonium-239/uranium-235 composite, or uranium-235 only. Plutonium is the most common choice, but e.g. the Violet Club bomb and Orange Herald warhead used massive hollow pits, consisting of 87 and 117 kg (98 and 125 kg according to other sources) of highly enriched uranium. The Green Grass fission core consisted of a sphere of highly enriched uranium, with inner diameter of 560 mm, wall thickness of 3.6 mm and mass of 70–86 kg; the pit was completely supported by the surrounding natural uranium tamper. Such massive pits, consisting of more than one critical mass of fissile material, present a significant safety risk, as even an asymmetrical detonation of the implosion shell may cause a kiloton-range explosion.[11] The largest-yield pure-fission weapon, the 500-kiloton Mark 18 nuclear bomb, used a hollow pit composed of more than 60 kg of highly enriched uranium, about four critical masses; the safing was done with an aluminiumboron chain inserted in the pit.

Sealed pits

A sealed pit means that a solid metal barrier is formed around the pit inside a nuclear weapon, with no openings. This protects the nuclear materials from environmental degradation and helps reduce the chances of their release in case of an accidental fire or minor explosion. The first US weapon employing a sealed pit was the W25 warhead. The metal is often stainless steel, but beryllium, aluminium, and possibly vanadium are also used. Beryllium is brittle, toxic and expensive, but is an attractive choice due to its role as a neutron reflector, lowering the needed critical mass of the pit. There is probably a layer of interface metal between plutonium and beryllium, capturing the alpha particles from decay of plutonium (and americium and other contaminants) which would otherwise react with the beryllium and produce neutrons. Beryllium tampers/reflectors came into use in the mid-1950s; the parts were machined from pressed powder beryllium blanks in the Rocky Flats Plant.[12]

More modern plutonium pits are hollow. An often-cited specification applicable to some modern pits describes a hollow sphere of a suitable structural metal, of the approximate size and weight of a [13] Beryllium-clad pits are more vulnerable to fracture, more sensitive to temperature fluctuations, more likely to require cleaning, susceptible to corrosion with chlorides and moisture, and can expose workers to toxic beryllium.

Newer pits contain about 3 kilograms of plutonium. Older pits used about 4-5 kilograms.[14]

Linear implosion pits

Further miniaturization was achieved by linear implosion. An elongated subcritical solid pit, reshaped into a supercritical spherical shape by two opposite shock waves, and later a hollow pit with more precisely shaped shock waves, allowed construction of relatively very small nuclear warheads. The configuration was, however, considered prone to accidental high-yield detonation when the explosive gets accidentally initiated, unlike a spherical implosion assembly where asymmetric implosion destroys the weapon without triggering a nuclear detonation. This necessitated special design precautions, and a series of safety tests, including one-point safety. Non-spherical pits are a significant technological advancement, making it possible to design smaller, lighter nuclear devices, suitable for e.g. multiple independently targetable reentry vehicles. Miniaturized warheads that employ linear implosion design, e.g. the W88, frequently use non-spherical, oblate spheroid pits. This configuration was first used in W47.[15]

In September 1992, China allegedly performed a successful nuclear test of a non-spherical pit, a crucial technological advancement.[16]

Pit sharing between weapons

Pits can be shared between weapon designs. For example, the W89 warhead is said to reuse pits from the W68s. Many pit designs are standardized and shared between different physics packages; the same physics packages are often used in different warheads. Pits can be also reused; the sealed pits extracted from disassembled weapons are commonly stockpiled for direct reuse. Due to low aging rates of the plutonium-gallium alloy, the shelf life of pits is estimated to be a century or more. The oldest pits in the US arsenal are still less than 50 years old.

The sealed pits can be classified as bonded or non-bonded. Non-bonded pits can be disassembled mechanically; a [13]

Pits of modern weapons are said to have radii of about 5 cm.[17]

Weapons and pit types

Weapons and pit types[18]
Design lab Weapon Pit type Status Used in Comment
LANL B61-3,4,10 123 Enduring Stockpile bomb
LANL B61-7,11 125 Enduring Stockpile bomb
LANL B61-4 118 Enduring Stockpile bomb
LANL W76 116 Enduring Stockpile Trident I and Trident II SLBM most heat-sensitive LANL design
LANL W78 117 Enduring Stockpile LGM-30 Minuteman ICBM
LANL W80 124 Enduring Stockpile very similar to W84, modification of B61; AGM-86, AGM-129, BGM-109 Tomahawk responsibility being transferred to LLNL
LANL W80 119 Enduring Stockpile very similar to W84, modification of B61; AGM-86, AGM-129, BGM-109 Tomahawk
LANL W80-0 Enduring Stockpile BGM-109 Tomahawk supergrade plutonium, low radiation, for submarines
LANL W88 126 Enduring Stockpile Trident II SLBM linear implosion, non-spherical pit
LLNL B83 MC3350 Enduring Stockpile gravity bomb heaviest pit, fire-resistant pit
LLNL W62 MC2406 Enduring Stockpile LGM-30 Minuteman ICBM
LLNL W84 ? Enduring Stockpile very similar to W80; BGM-109G GLCM fire-resistant pit
LLNL W87 MC3737 Enduring Stockpile LGM-118A Peacekeeper fire-resistant pit
LANL B28 83 retired bomb
LANL B28-0 93 retired bomb minimum decay heat
LANL B43 79 retired bomb beryllium-clad
LANL B43-1 101 retired Tsetse primary; bomb beryllium-clad
LANL W33 ? retired 8" nuclear artillery shell
LANL W44 74 retired Tsetse primary; RUR-5 ASROC antisubmarine beryllium-clad
LANL W44-1 100 retired Tsetse primary beryllium-clad
LANL W50-1 103 retired Tsetse primary; MGM-31 Pershing IRBM
LANL B54 81 retired bomb require cleaning before long-term storage
LANL B54-1 96 retired bomb require cleaning before long-term storage
LANL B57 104 retired Tsetse primary; bomb
LANL W59 90 retired Tsetse primary; Minuteman I ICBM
LANL B61-0 110 retired bomb
LANL B61-2,5 114 retired bomb
LANL W66 112 retired Sprint antiballistic missile
LANL W69 111 retired AGM-69 SRAM
LANL W85 128 retired Pershing II
LLNL W48 MC1397 retired 6.1" nuclear artillery shell beryllium-clad, require cleaning before long-term storage
LLNL W55 MC1324 retired UUM-44 SUBROC antisubmarine missile beryllium-clad?
LLNL W56 MC1801 retired Minuteman I, Minuteman II high radiation, require cleaning before long-term storage
LLNL W68 MC1978 retired UGM-73 Poseidon SLBM
LLNL W70-0 MC2381 retired MGM-52 Lance
LLNL W70-1 MC2381a retired MGM-52 Lance
LLNL W70-2 MC2381b retired MGM-52 Lance
LLNL W70-3 MC2381c retired MGM-52 Lance, enhanced-radiation
LLNL W71 ? retired LIM-49 Spartan antiballistic missile require cleaning before long-term storage
LLNL W79 MC2574 retired 8" nuclear artillery shell beryllium-clad?

Safety considerations

Steel ball safing
One-point safety test

The first weapons had removable pits, which were installed into the bomb shortly before its deployment. The ongoing miniaturization process led to design changes, whereby the pit could be inserted in the factory during the device assembly. This necessitated safety testing to make sure that accidental detonation of the high explosives would not cause a full-scale nuclear explosion; Project 56 was one of such a series of tests.

Accidental high-yield detonation was always a concern. The levitated pit design made it practical to allow in-flight insertion of pits to the bombs, separating the fissile core from the explosives around it. Many cases of accidental bomb losses and explosions therefore led only to dispersal of uranium from the bomb's tamper. Later hollow-pit designs, where there is no space between the pit and the tamper, however, made this impossible.

The pits of earlier weapons had accessible inner cavities. For safety, objects were inserted into the pit and removed only when needed. Some larger pits, e.g. the British Green Grass, had their inner cavity lined with rubber and filled with metal balls; this design was improvised and far from optimal, for example in that subjecting the safed pit with balls inside to vibration, e.g. in an airplane, could lead to its damage. A fine metal chain from a neutron-absorbing material (the same used for reactor control rods, e.g. cadmium), can be used instead. The W47 warhead had its pit filled with a cadmium-boron wire when it was manufactured; on arming the weapon, the wire was pulled out to a spool by a small motor and could not be reinserted. However, the wire tended to become brittle and break during removal, making its complete removal impossible and rendering the warhead a dud.[19]

The switch from solid to hollow pits caused a work safety issue; the larger surface-to-mass ratio led to comparatively higher emission of gamma rays and necessitated the installation of better radiation shielding in the Rocky Flats production facility. The increased amount of rolling and machining required led to higher consumption of machining oil and tetrachloromethane, used for degreasing the parts afterwards and creating a large amount of contaminated waste. The pyrophoric plutonium shavings also posed a risk of self-ignition.[20]

Sealed pits require a different method of safing. Many techniques are used, including Permissive Action Links[21] and strong link weak link systems, designed to fail in case of an accident or improper arming sequence; these include mechanical interlocks, critical parts designed to malfunction in case of fire or impact, etc.

Beryllium cladding, while advantageous technically, poses risk for the weapon plant employees. Machining the tamper shells produces beryllium and beryllium oxide dust; its inhalation can cause berylliosis. By the 1996, the US Department of Energy identified more than 50 cases of chronic berylliosis among nuclear industry employees, including three dozen in the Rocky Flats Plant; several died.[12]

After the 1966 Palomares B-52 crash and the 1968 Thule Air Base B-52 crash, the safety of weapons against accidental plutonium dispersal became a concern of US military.

Fire-resistant pits (FRP) are a safety feature of modern nuclear weapons, reducing plutonium dispersal in case of fire. The current pits are designed to contain molten plutonium in temperatures up to 1000°C, the approximate temperature of a burning aircraft fuel, for several hours.[22] Fire-resistant pits would be of no help in cases where pits were scattered around by an explosion; they are used therefore together with insensitive high explosives, which should be resistant to accidental detonation by impact or fire, and undetonable propellants when used in missiles. Vanadium cladding was tested for design of fire-resistant pits, but it is unknown if it is in use or only experimental. The W87 warhead is an example of a FRP-employing assembly.[23] FRP does not, however, provide protection if the pit cladding is mechanically damaged, and may fail if subjected to missile fuel fire, which has a higher burning temperature (about 2000 °C) than does aircraft fuel.[24][25] Severe weight and size constraints may preclude the use of both FRP and insensitive explosives.[26] SLBMs, with their size considerations and more energetic and vulnerable fuel, tend to be less safe than ICBMs.[27]

Other energetic materials in the vicinity of the pit also influence its safety. US missile propellants come in two general classes. The class 1.3, fire hazard but very difficult to impossible to detonate; an example is 70% ammonium perchlorate, 16% aluminium, and 14% binder. The class 1.1, both fire and detonation hazard, is a double-base propellant based on cross-linked polymer, containing 52% HMX, 18% nitroglycerine, 18% aluminium, 4% ammonium perchlorate, and 8% binder. The 1.1 propellant has 4% higher specific impulse (about 270 s versus 260 s), giving an 8% longer range for constant burning time. The insensitive high explosives are also less powerful, necessitating larger and heavier warheads, which reduces the missile range - or sacrificing some yield. The safety/performance tradeoff is especially important for e.g. submarines.[25] As of 1990, the Trident SLBMs used both detonable fuel and non-insensitive explosives.[28]

Material considerations

Casting and then machining plutonium is difficult not only because of its toxicity, but because plutonium has many different metallic phases, also known as allotropes. As plutonium cools, changes in phase result in distortion and cracking. This distortion is normally overcome by alloying it with 3–3.5 molar% (0.9–1.0% by weight) gallium, forming a plutonium-gallium alloy, which causes it to take up its delta phase over a wide temperature range.[29] When cooling from molten it then suffers only a single phase change, from epsilon to delta, instead of the four changes it would otherwise pass through. Other trivalent metals would also work, but gallium has a small neutron absorption cross section and helps protect the plutonium against corrosion. A drawback is that gallium compounds themselves are corrosive and so if the plutonium is recovered from dismantled weapons for conversion to plutonium dioxide for power reactors, there is the difficulty of removing the gallium.

Because plutonium is chemically reactive it is common to plate the completed pit with a thin layer of inert metal, which also reduces the toxic hazard.[30] The gadget used galvanic silver plating; afterwards, nickel deposited from nickel tetracarbonyl vapors was used,[30] but gold is now preferred.

To produce the first pits, hot pressing was used to optimally employ the scarce plutonium. Later designs used machined pits, but turning produces a large amount of waste, both as pyrophoric turnings of plutonium and plutonium-contaminated oils and cutting fluids. The goal for the future is direct casting of the pit. In the absence of nuclear testing, however, the slightly different nature of cast and machined surfaces may cause difficult to predict performance differences.[31]

Corrosion issues

Both uranium and plutonium are very susceptible to radiolysis. These factors cause issues with storage of plutonium. The volume increase during oxidation can cause rupture of storage containers or deformation of pits.[34]

Contamination of the pit with deuterium and tritium, whether accidental or if filled by design, can cause a hydride corrosion, which manifests as [13] Deuterium and tritium also cause hydrogen embrittlement in many materials.

Improper storage can promote corrosion of the pits. The AL-R8 containers used in the Pantex facility for storage of the pits are said to promote instead of hinder corrosion, and tend to corrode themselves. The decay heat released by the pits is also a concern; some pits in storage can reach temperatures as high as 150°C, and the storage facilities for larger numbers of pits may require active cooling. Humidity control can also present problems for pit storage.[35]

Beryllium cladding can be corroded by some solvents used for cleaning of the pits. Research shown that trichloroethylene (TCE) causes beryllium corrosion, while trichloroethane (TCA) does not.[36] Pitting corrosion of beryllium cladding is a significant concern during prolonged storage of pits in the Pantex facility.

Isotopic composition issues

The presence of plutonium-240 in the pit material causes increased production of heat and neutrons, impairs fission efficiency and increases the risk of predetonation and fizzle. Weapon-grade plutonium therefore has plutonium-240 content limited to less than 7%. Supergrade plutonium has less than 4% of the 240 isotope, and is used in systems where the radioactivity is a concern, e.g. in the US Navy weapons which have to share confined spaces on ships and submarines with the crews.

Plutonium-241, commonly comprising about 0.5% of weapon-grade plutonium, decays to americium-241, which is a powerful gamma radiation emitter. After several years, americium builds up in the plutonium metal, leading to increased gamma activity that poses occupational hazard for workers. Americium should therefore be separated, usually chemically, from newly produced and reprocessed plutonium.[14] However in around 1967 the Rocky Flats Plant stopped this separation, blending up to 80% of old americium-containing pits directly to the foundry instead, in order to reduce costs and increase productivity; this led to higher exposure of workers to gamma radiation.[20]

Aging issues

Metallic plutonium, notably in the form of the plutonium-gallium alloy, degrades chiefly by two mechanisms: corrosion, and self-irradiation.

In very dry air, plutonium, despite its high chemical reactivity, forms a passivation layer of plutonium(IV) oxide that slows down the corrosion to about 200 nanometers per year. In moist air, however, this passivation layer is disrupted and the corrosion proceeds at 200 times this rate (0.04 mm/year) at room temperature, and 100,000 times faster (20 mm/year) at 100°C. Plutonium strips oxygen from water, absorbs the liberated hydrogen and forms plutonium hydride. The hydride layer can grow at up to 20 cm/hour, for thinner shells its formation can be considered almost instant. In presence of water the plutonium dioxide becomes hyperstoichiometric, up to PuO2.26. Plutonium chips can spontaneously ignite; the mechanism involves formation of Pu2O3 layer, which then rapidly oxidizes to PuO2, and the liberated heat is sufficient to bring the small particles with low thermal mass to autoignition temperature (about 500 °C).

The self-irradiation occurs as the plutonium undergoes alpha-decay. The decaying atom of plutonium-239 liberates an alpha particle and a uranium-235 nucleus. The alpha particle has an energy of more than 5 MeV and in the metal lattice has range of about 10 micrometers; then it stops, acquires two electrons from nearby atoms, and becomes a helium atom. The contaminant plutonium-241 beta-decays to americium-241, which then alpha-decays to neptunium-237.

The alpha-particles lose most of their energy to electrons, which manifests as heating the material. The heavier uranium nucleus has about 85 keV energy and about three quarters of it deposit as a cascade of atomic displacements; the uranium nucleus itself has the range of about 12 nanometers in the lattice. Each such decay event influences about 20,000 other atoms, 90% of which stay in their lattice site and only are thermally excited, the rest being displaced, resulting in formation of about 2500 Frenkel pairs and a local thermal spike lasting few picoseconds, during which the newly formed defects recombine or migrate. In a typical weapons-grade bulk material, each atom gets displaced in average once per 10 years.

At cryogenic temperatures, where next to no annealing occurs, the α-phase of plutonium expands (swells) during self-irradiation, the δ-phase contracts markedly, and the β-phase contracts slightly. The electrical resistance increases, which indicates the increase of defects in the lattice. All three phases, with sufficient time, converge to amorphous-like state with density averaging at 18.4 g/cm3. At normal temperature, however, most of the damage is annealed away; above 200K vacancies become mobile and at around 400K the clusters of interstitials and vacancies recombine, healing the damage. Plutonium stored at non-cryogenic temperatures does not show signs of major macroscopic structural changes after more than 40 years.

After 50 years of storage, a typical sample contains 2000 ppm of helium, 3700 ppm americium, 1700 ppm uranium, and 300 ppm neptunium. One kilogram of material contains 200 cm3 of helium, which equals three atmospheres of pressure in the same empty volume. Helium migrates through the lattice similarly to the vacancies, and can be trapped in them. The helium-occupied vacancies can coalesce, forming bubbles and causing swelling. Void-swelling is however more likely than bubble-swelling. [37]

Production and inspections

The Radiation Identification System is among a number of methods developed for nuclear weapons inspections. It allows the fingerprinting of the nuclear weapons so that their identity and status can be verified. Various physics methods are used, including gamma spectroscopy with high-resolution germanium detectors. The 870.7 keV line in the spectrum, corresponding to the first excited state of oxygen-17, indicates the presence of plutonium(IV) oxide in the sample. The age of the plutonium can be established by measuring the ratio of plutonium-241 and its decay product, americium-241.[38] However, even passive measurements of gamma spectrums may be a contentious issue in international weapon inspections, as it allows characterization of materials used e.g. the isotopic composition of plutonium, which can be considered a secret.

Between 1954 and 1989, pits for US weapons were produced at the [13] 5,000 of them, comprising about 15 tons of plutonium, are designated as strategic reserve; the rest is surplus to be withdrawn.[40] The current LANL production of new pits is limited to about 20 pits per year, though NNSA is pushing to increase the production, for the Reliable Replacement Warhead program. The US Congress however has repeatedly declined funding.

Up until around 2010, Los Alamos National Laboratory had the capacity to produce 10 to 20 pits a year. The Chemistry and Metallurgy Research Replacement Facility (CMMR) will expand this capability, but it is not known by how much. An Institute for Defense Analyses report written before 2008 estimated a “future pit production requirement of 125 per year at the CMRR, with a surge capability of 200."[41]

Russia stores the material from decommissioned pits in the Mayak facility.[42]

Pit recycling

Recovery of plutonium from decommissioned pits can be achieved by numerous means, both mechanical (e.g. removal of cladding by a lathe) and chemical. A hydride method is commonly used; the pit is cut in half, a half of the pit is laid inside-down above a funnel and a crucible in a sealed apparatus, and an amount of hydrogen is injected into the space. The hydrogen reacts with the plutonium producing plutonium hydride, which falls to the funnel and the crucible, where it is melted while releasing the hydrogen. Plutonium can also be converted to a nitride or oxide. Practically all plutonium can be removed from a pit this way. The process is complicated by the wide variety of the constructions and alloy compositions of the pits, and the existence of composite uranium-plutonium pits. Weapons-grade plutonium must also be blended with other materials to alter its isotopic composition enough to hinder its reuse in weapons.


  1. ^ "Restricted Data Declassification Decisions from 1945 until Present" – "Fact that plutonium and uranium may be bonded to each other in unspecified pits or weapons."
  2. ^ "Constructing the Nagasaki Atomic Bomb". Web of Stories. Retrieved October 12, 2014. 
  3. ^ Wellerstein, Alex. "Christy’s Gadget: Reflections on a death". Restricted data blog. Retrieved October 7, 2014. 
  4. ^ "'"Hans Bethe 94 - Help from the British, and the 'Christy Gadget. Web of Stories. Retrieved October 12, 2014. 
  5. ^ Hoddeson et al. 1993, pp. 307–308.
  6. ^
  7. ^ The atomic bomb test for 'Fat Man'
  8. ^ Bulletin of the Atomic Scientists - Knihy Google
  9. ^ Broken Arrow #1 (E-Book) - John Clearwater - Knihy Google
  10. ^ John Clearwater (1999). U.S. nuclear weapons in Canada. Dundurn Press Ltd. p. 99.  
  11. ^ Retrieved on 2010-02-08.
  12. ^ a b Len Ackland (1999). Making a real killing: Rocky Flats and the nuclear West. UNM Press. p. 75.  
  13. ^ a b c d BREDL Southern Anti-Plutonium Campaign. (1995-08-22). Retrieved on 2010-02-08.
  14. ^ a b Nuclear Wastelands: A Global Guide to Nuclear Weapons Production and Its Health and Environmental Effects by Arjun Makhijani, Katherine Yih, MIT Press, 2000 ISBN 0-262-63204-7, p. 58
  15. ^ W88. Retrieved on 2010-02-08.
  16. ^ Joseph Masco (2006). The nuclear borderlands: the Manhattan Project in post-Cold War New Mexico. Princeton University Press. p. 266.  
  17. ^ Joseph Cirincione (2008). Bomb Scare: The History and Future of Nuclear Weapons. Columbia University Press. p. 184.  
  18. ^ "BREDL Southern Anti-Plutonium Campaign". 1995-08-22. Retrieved 2010-02-21. 
  19. ^ Grant Elliott, MIT Program in Science, Technology, and Society, US Nuclear Weapon Safety and Control 2005
  20. ^ a b Making a Real Killing: Rocky Flats and the Nuclear West, Len Ackland, p. 131, UNM Press, 2002 ISBN 0-8263-2798-2
  21. ^ Permissive Action Links. Retrieved on 2010-02-08.
  22. ^ Fire Resistant Pits. ArmsControlWonk (2007-09-24). Retrieved on 2010-02-08.
  23. ^ "U.S. Strategic Nuclear Forces". Bulletin of the Atomic Scientists 54 (1). Jan 1998. 
  24. ^ Nathan E. Busch (2004). No end in sight: the continuing menace of nuclear proliferation. University Press of Kentucky. p. 51.  
  25. ^ a b Sidney D. Drell, Sidney David Drell (2007). Nuclear weapons, scientists, and the post-Cold War challenge: selected papers on arms control. World Scientific. p. 151.  
  26. ^ M. V. Ramana (2003). Prisoners of the nuclear dream. Orient Blackswan. p. 19.  
  27. ^ Physics of societal issues: calculations on national security, environment, and energy. Springer. 2007. p. 177.  
  28. ^ Bruce D. Larkin (1996). Nuclear designs: Great Britain, France, and China in the global governance of nuclear arms. Transaction Publishers. p. 272.  
  29. ^ "Restricted Data Declassification Decisions from 1946 until Present"
  30. ^ a b Fissionable Materials section of the Nuclear Weapons FAQ, Carey Sublette. Retrieved Sept 23, 2006.
  31. ^ Michael E. O'Hanlon (2009). The Science of War: Defense Budgeting, Military Technology, Logistics, and Combat Outcomes. Princeton University Press. p. 221.  
  32. ^ From Polaris to Trident: the development of US Fleet ballistic missile technology by Graham Spinardi, Volume 30 of Cambridge studies in international relations, Cambridge University Press, 1994 ISBN 0-521-41357-5, p. 204
  33. ^ The Arms Control, Disarmament, and Military Security Dictionary by Jeffrey M. Elliot, Robert Reginald, Wildside Press, 2007 ISBN 1-4344-9052-1
  34. ^ Ageing studies and lifetime extension of materials by Leslie G. Mallinson, Springer, 2001 ISBN 0-306-46477-2
  35. ^ Texas Radiation Online - Pantex Plutonium Plant - Nuclear Weapons. Retrieved on 2010-02-08.
  36. ^ URA Accomplishments. Retrieved on 2010-02-08.
  37. ^
  38. ^ Appendix 8A. Russian and US technology development in support of nuclear warhead and material transparency initiatives by Oleg Bukharin
  39. ^ NWNM | U.S. Plutonium Pit Manufacturing. Retrieved on 2010-02-08.
  40. ^ Susan Willett, United Nations Institute for Disarmament Research (2003). Costs of disarmament-disarming the costs: nuclear arms control and nuclear rearmament. United Nations Publications. p. 68.  
  41. ^ Pein, Corey (August 21, 2010). "It's the Pits: Los Alamos wants to spend billions for new nuke triggers". Santa Fe Reporter. Retrieved 25 September 2010. 
  42. ^ National Academy of Sciences (2005). Monitoring nuclear weapons and nuclear-explosive materials. National Academies Press. p. 117.  
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.