World Library  
Flag as Inappropriate
Email this Article

Jfet

Article Id: WHEBN0000040346
Reproduction Date:

Title: Jfet  
Author: World Heritage Encyclopedia
Language: English
Subject: Transistor, Constant-current diode, Lambda diode, MOSFET, Operational amplifier
Collection: Transistor Types
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Jfet

The junction gate field-effect transistor (JFET or JUGFET) is the simplest type of field-effect transistor. They are three-terminal semiconductor devices that can be used as electronically-controlled switches, amplifiers, or voltage-controlled resistors.

Unlike bipolar transistors, JFETs are exclusively voltage-controlled in that they do not need a biasing current. Electric charge flows through a semiconducting channel between source and drain terminals. By applying a reverse bias voltage to a gate terminal, the channel is "pinched", so that the electric current is impeded or switched off completely. A JFET is usually on when there is no potential difference between its gate and source terminals. If a potential difference of the proper polarity is applied between its gate and source terminals, the JFET will be more resistive to current flow, which means less current would flow in the channel between the source and drain terminals. Thus, JFETs are sometimes referred to as depletion-mode devices.

JFETs can have an n-type or p-type channel. In the n-type, if the voltage applied to the gate is less than that applied to the source, the current will be reduced (similarly in the p-type, if the voltage applied to the gate is greater than that applied to the source). A JFET has a large input impedance (sometimes on the order of 1010 ohms), which means that it has a negligible effect on external components or circuits connected to its gate.

Contents

  • Structure 1
  • Function 2
  • Schematic symbols 3
  • Comparison with other transistors 4
  • History of the JFET 5
  • Mathematical model 6
  • See also 7
  • References 8
  • External links 9

Structure

Electric current from source to drain in a p-channel JFET is restricted when a voltage is applied to the gate.

The JFET is a long channel of semiconductor material, doped to contain an abundance of positive charge carriers or holes (p-type), or of negative carriers or electrons (n-type). Ohmic contacts at each end form the source (S) and drain (D). A pn-junction is formed on one or both sides of the channel, or surrounding it, using a region with doping opposite to that of the channel, and biased using an ohmic gate contact (G).

Function

I–V characteristics and output plot of an n-channel JFET

JFET operation is like that of a garden hose. The flow of water through a hose can be controlled by squeezing it to reduce the cross section; the flow of electric charge through a JFET is controlled by constricting the current-carrying channel. The current also depends on the electric field between source and drain (analogous to the difference in pressure on either end of the hose).

Construction of the conducting channel is accomplished using the field effect: a voltage between the gate and source is applied to reverse bias the gate-source pn-junction, thereby widening the depletion layer of this junction (see top figure), encroaching upon the conducting channel and restricting its cross-sectional area. The depletion layer is so-called because it is depleted of mobile carriers and so is electrically non-conducting for practical purposes.[1]

When the depletion layer spans the width of the conduction channel, "pinch-off" is achieved and drain to source conduction stops. Pinch-off occurs at a particular reverse bias (VGS) of the gate-source junction. The pinch-off voltage (Vp) varies considerably, even among devices of the same type. For example, VGS(off) for the Temic J202 device varies from −0.8 V to −4 V.[2] Typical values vary from −0.3 V to −10 V.

To switch off an n-channel device requires a negative gate-source voltage (VGS). Conversely, to switch off a p-channel device requires positive VGS.

In normal operation, the electric field developed by the gate blocks source-drain conduction to some extent.

Some JFET devices are symmetrical with respect to the source and drain.

Schematic symbols

Circuit symbol for an n-Channel JFET
Circuit symbol for a p-Channel JFET

The JFET gate is sometimes drawn in the middle of the channel (instead of at the drain or source electrode as in these examples). This symmetry suggests that "drain" and "source" are interchangeable, so the symbol should be used only for those JFETs where they are indeed interchangeable.

Officially, the style of the symbol should show the component inside a circle (representing the envelope of a discrete device). This is true in both the US and Europe. The symbol is usually drawn without the circle when drawing schematics of integrated circuits. More recently, the symbol is often drawn without its circle even for discrete devices.

In every case the arrow head shows the polarity of the P-N junction formed between the channel and gate. As with an ordinary diode, the arrow points from P to N, the direction of conventional current when forward-biased. An English mnemonic is that the arrow of an N-channel device "points in".

Comparison with other transistors

At room temperature, JFET gate current (the reverse leakage of the gate-to-channel junction) is comparable to that of a MOSFET (which has insulating oxide between gate and channel), but much less than the base current of a bipolar junction transistor. The JFET has higher transconductance than the MOSFET, as well as lower flicker noise, and is therefore used in some low-noise, high input-impedance op-amps.

History of the JFET

The JFET was predicted by Julius Lilienfeld in 1925 and by the mid-1930s its theory of operation was sufficiently well known to justify a patent. However, it was not possible for many years to make doped crystals with enough precision to show the effect. In 1947, researchers John Bardeen, Walter Houser Brattain, and William Shockley were trying to make a JFET when they discovered the point-contact transistor. The first practical JFETs were made many years later, in spite of their conception long before the junction transistor. To some extent it can be treated as a hybrid of a MOSFET (metal–oxide–semiconductor field-effect transistor) and a BJT though an IGBT resembles more of the hybrid features.

Mathematical model

The current in N-JFET due to a small voltage VDS (that is, in the linear ohmic region) is given by treating the channel as a rectangular bar of material of electrical conductivity q N_d \mu_n:[3]

I_{D} = \frac{bW}{L} q N_d \mu_n V_{DS}

where

ID = drain–source current
b = channel thickness for a given gate voltage
W = channel width
L = channel length
q = electron charge = 1.6 x 10−19 C
μn = electron mobility
Nd = n-type doping (donor) concentration

The drain current in the saturation region is often approximated in terms of gate bias as:[3]

I_{DS} = I_{DSS}\left(1 - \frac{V_{GS}}{V_P}\right)^2

where

IDSS is the saturation current at zero gate–source voltage.

In the saturation region, the JFET drain current is most significantly affected by the gate–source voltage and barely affected by the drain–source voltage.

If the channel doping is uniform, such that the depletion region thickness will grow in proportion to the square root of (the absolute value of) the gate–source voltage, then the channel thickness b can be expressed in terms of the zero-bias channel thickness a as:

b = a \left(1 - \sqrt{\frac{V_{GS}}{V_P}}\right)

where

VP is the pinchoff voltage, the gate–source voltage at which the channel thickness goes to zero
a is the channel thickness at zero gate–source voltage.

Then the drain current in the linear ohmic region can be expressed as:

I_D = \frac{bW}{L} q N_d {V_P}}\right)V_{DS}

or (in terms of I_{DSS}):

I_D = \frac{2I_{DSS}}{V_P^2} \left(V_{GS} - V_P - \frac{V_{DS}}{2}\right)V_{DS}

See also

References

  1. ^ For a discussion of JFET structure and operation, see for example D. Chattopadhyay (2006). "§13.2 Junction field-effect transistor (JFET)". Electronics (fundamentals and applications). New Age International. pp. 269 ff.  
  2. ^ J201 data sheet
  3. ^ a b Balbir Kumar and Shail B. Jain (2013). Electronic Devices and Circuits. PHI Learning Pvt. Ltd. pp. 342–345.  

External links

  • Physics 111 Laboratory -- JFET Circuits I pdf
  • Interactive Explanation of n-channel JFET
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.