World Library  
Flag as Inappropriate
Email this Article

Slot 1

Article Id: WHEBN0000469472
Reproduction Date:

Title: Slot 1  
Author: World Heritage Encyclopedia
Language: English
Subject: Pentium III, List of Intel microprocessors, Slot 2, Pentium II, List of Intel Pentium II microprocessors
Collection: Cpu Sockets
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Slot 1

Slot 1
Type Slot
Chip form factors
Contacts 242[1]
FSB protocol GTL+
FSB frequency 66, 100, and (on third-party chipsets) 133  MHz
Voltage range 1.3 to 3.50  V
Processors

Pentium II: 233–450 MHz
Celeron: 266–433 MHz
Pentium III: 450–1.133 GHz
(A Slotket makes following Socket 370 CPUs usable:
Celeron and Pentium III to 1,400 MHz,
VIA Cyrix III: 350–733 MHz,
VIA C3: 733–1,200 MHz

Slotkets also made it possible to use some Pentium Pro CPUs for Socket 8 using the same method.)

This article is part of the CPU socket series

Slot 1 refers to the physical and electrical specification for the connector used by some of Intel's microprocessors, including the Pentium Pro, Celeron, Pentium II and the Pentium III. Both single and dual processor configurations were implemented.

Contents

  • General 1
  • Form Factors 2
  • History 3
  • Chipsets and officially supported CPUs 4
    • Intel 440FX 4.1
    • Intel 440LX 4.2
    • Intel 440EX 4.3
    • Intel 440BX 4.4
    • Intel 440ZX 4.5
    • Intel 820/820E (Camino) 4.6
    • Via Apollo Pro / Pro+ 4.7
    • Via Apollo Pro 133 4.8
    • Via Apollo Pro 133A 4.9
  • Pentium III B and EB models 5
  • See also 6
  • References 7
  • External links 8

General

With the introduction of the Pentium II CPU, the need for greater access for testing had made the transition from socket to slot necessary. Previously with the Pentium Pro, Intel had combined processor and cache dies in the same Socket 8 package. These were connected by a full-speed bus, resulting in significant performance benefits. Unfortunately, this method required that the two components be bonded together early in the production process, before testing was possible. As a result, a single, tiny flaw in either die made it necessary to discard the entire assembly, causing low production yield and high cost.[2]

Intel subsequently designed a circuit board where the CPU and cache remained closely integrated, but were mounted on a printed circuit board, called a Single-Edged Contact Cartridge (SECC). The CPU and cache could be tested separately, before final assembly into a package, reducing cost and making the CPU more attractive to markets other than that of high-end servers. These cards could also be easily plugged into a Slot 1, thereby eliminating the chance for pins of a typical CPU to be bent or broken when installing in a socket.

The form factor used for Slot 1 was a 5-inch-long, 242-contact edge connector named SC242. To prevent the cartridge from being inserted the wrong way, the slot was keyed to allow installation in only one direction. The SC242 was later used for AMD's Slot A as well, and while the two slots were identical mechanically, they were electrically incompatible. To discourage Slot A users from trying to install a Slot 1 CPU, the connector was rotated 180 degrees on Slot A motherboards.

With the new Slot 1, Intel added support for symmetric multiprocessing (SMP). A maximum of two Pentium II or Pentium III CPUs can be used in a dual slot motherboard. The Celeron does not have official SMP support.

There are also converter cards, known as Slotkets, which hold a Socket 8 so that a Pentium Pro CPU can be used with Slot 1 motherboards.[3] These specific converters, however, are rare. Another kind of slotket allows using a Socket 370 CPU in a Slot 1. Many of these latter devices are equipped with own voltage regulator modules, in order to supply the new CPU with a lower core voltage, which the motherboard would not otherwise allow.

Form Factors

Intel Pentium II CPU in SECC form factor
Pentium III (Katmai) in SECC2: CPU at center, two chips at right are cache
Celeron in SEPP: CPU at center (under heat spreader), surrounding chips are resistors

The Single Edge Contact Cartridge, or "SECC", was used at the beginning of the Slot 1-era for Pentium II CPUs. Inside the cartridge, the CPU itself is enclosed in a hybrid plastic and metal case. The back of the housing is plastic and has several markings on it: the name, "Pentium II"; the Intel logo; a hologram; and the model number. The front consists of a black anodized aluminum plate, which is used to hold the CPU cooler. The SECC form is very solid, because the CPU itself is resting safely inside the case. As compared to socket-based CPUs, there are no pins that can be bent, and the CPU is less likely to be damaged by improper installation of a cooler.

Following SECC, the SEPP-form (Single Edge Processor Package) appeared on the market. It was designed for lower-priced Celeron CPUs. This form lacks a case entirely, consisting solely of the printed-circuit board holding the components.

The Pentium III processors also use a protective case, renamed SECC2. The only item to be carried forward from the old SECC form is the backplate. The CPU lies free and, as with Celerons, the heatsink lies directly on the core for a better heat transfer.

History

Historically, there are three platforms for the Intel P6-CPUs: Socket 8, Slot 1 and Socket 370.

Slot 1 is a successor to Socket 8. While the Socket 8 CPUs (Pentium Pro) directly had the L2-cache embedded into the CPU, it is located (outside of the core) on a circuit board shared with the core itself. The exception is later Slot 1 CPUs with the Coppermine core which have the L2-Cache embedded into the die.

In the beginning of 2000, while the Pentium-III-CPUs with FC-PGA-housing appeared, Slot 1 was slowly succeeded by Socket 370, after Intel had already offered Socket 370 and Slot 1 at the same time since the beginning of 1999. Socket 370 was initially made for the low-cost Celeron processors, while Slot 1 was thought of as a platform for the expensive Pentium II and early Pentium III models. Cache and core were both embedded into the die.

Slot 1 also obsoleted the old Socket 7, at least regarding Intel, as the standard platform for the home-user. After abandoning the Intel P5 Pentium MMX CPU, Intel completely left the Socket 7 market to the manufacturers AMD, Cyrix and IDT.

Chipsets and officially supported CPUs[4][5]

Slot 1/Socket 370 Converter
Slot 1/Socket 8 Converter

Intel 440FX [6]

  • Introduced in: May 6, 1996
  • FSB: 66 MHz
  • PIO/WDMA
  • Supported RAM type: EDO-DRAM
  • Supported CPUs:
  • Used in both Socket 8 (Pentium Pro) and Slot 1 (Pentium II, early Celerons)
  • Does not support AGP or SDRAM
  • Allowed up to two CPUs for SMP

Intel 440LX [7]

  • Introduced in: August 27, 1997
  • FSB: 66 MHz
  • Supported RAM type: EDO-DRAM, SDRAM
  • Supported CPUs: Pentium II, Celeron
  • AGP 2× Mode
  • UDMA/33
  • Introduced support for AGP and SDRAM
  • Allowed up to two CPUs for SMP

Intel 440EX [8]

  • Introduced in: April, 1998
  • FSB: 66 MHz
  • Supported RAM type: EDO-DRAM, SDRAM
  • Supported CPUs: Pentium II, Celeron
  • AGP 2× Mode
  • UDMA/33
  • Same specifications as 440LX, but memory support limited to 256MB and no SMP support.

Intel 440BX [9]

  • Introduced in: April 1998
  • FSB: 66 and 100 MHz (some motherboards supported overclocking to 133 MHz, allowing usage of Socket 370 CPUs using a Slocket)
  • AGP 2× Mode (max memory mapping 32 or 64 MB)
  • UDMA/33
  • Supported RAM types: SDRAM (PC66 and PC100, PC133 with overclocking) up to 4 DIMMs of 256 MB
  • Supported CPUs:
  • Allowed up to two CPUs for SMP

Intel 440ZX

  • Introduced in: November 1998
  • FSB: 66 and 100 MHz (some motherboards supported overclocking to 133 MHz, allowing usage of Socket 370 CPUs using a Slocket)
  • AGP 2× Mode
  • UDMA/33
  • Supported RAM types: SDRAM (PC66 and PC100, PC133 with overclocking)
  • Supported CPUs:

Intel 820/820E (Camino)

  • Introduced in: November 1999
  • FSB: 66, 100, and 133 MHz
  • AGP 4× Mode
  • UDMA/66 (i820), UDMA/100 (i820E)
  • Supported RAM types: RDRAM, SDRAM (PC133)
  • Supported CPUs: All Slot 1 CPUs
  • Allowed up to two CPUs for SMP

Via Apollo Pro / Pro+

  • Introduced in: May 1998 (Pro Plus: Dec 1998)
  • FSB: 66, 100 MHz (some motherboards supported overclocking to 133 MHz, allowing usage of Socket 370 CPUs using a Slocket)
  • AGP 2× Mode
  • UDMA/33 (VT82C586B/VT82C596A), UDMA/66 (VT82C596B)
  • Supported CPUs:

Via Apollo Pro 133

  • Introduced in: July 1999
  • FSB: 66, 100, and 133 MHz
  • AGP 2× Mode
  • UDMA/33 (VT82C596A), UDMA/66 (VT82C596B/VT82C686A), UDMA/100 (VT82C686B)
  • Supported CPUs: All Slot 1 CPUs

Via Apollo Pro 133A

  • Introduced in: Oct 1999
  • FSB: 66, 100, and 133 MHz
  • AGP 4× Mode
  • UDMA/66 (VT82C596B/VT82C686A), UDMA/100 (VT82C686B)
  • Supported CPUs: All Slot 1 CPUs
  • Allowed up to two CPUs for SMP

Pentium III B and EB models

A special series of Pentium III for Slot 1 had an addition to its name (Pentium III EB). The "E" indicates a Coppermine core, and the "B" a 133 MHz FSB. Ironically, no consumer-oriented Intel chipset (except select few i820-based motherboards) officially supports a FSB of 133 MHz. To use this CPU, one must either use the VIA Apollo Pro 133A chipset, an Intel 800-series chipset (which was relatively expensive and often required RDRAM, limiting it to high-end workstations or servers), or the Intel 440BX outside of its specifications (which, on some motherboards, is indeed possibly stable).

See also

References

  1. ^ "CPU Sockets Chart". erols.com. Retrieved 2009-03-31. 
  2. ^ Pentium_Pro#An_innovation_in_cache
  3. ^ Experience of Pentium Pro on Slot 1 motherboard usage
  4. ^ List of Intel chipsets
  5. ^ List of VIA chipsets
  6. ^ Intel Corporation: 440FX PCIset Datasheet
  7. ^ Intel Corporation: 440LX AGPset Design Guide
  8. ^ Intel Corporation: 440EX AGPset Design Guide
  9. ^ Intel Corporation: 440BX AGPset Design Guide

External links

  • Intel's specifications for the SC242 connectors
  • Intel's detailed Slot 1 CPU (Coppermine) information, including Slot 1 pinout
  • An image of a motherboard with Slot 1 connector
  • An image of a Pentium II processor
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.