World Library  
Flag as Inappropriate
Email this Article

Free-radical halogenation

Article Id: WHEBN0001222839
Reproduction Date:

Title: Free-radical halogenation  
Author: World Heritage Encyclopedia
Language: English
Subject: Free radical reactions, Free-radical reaction, Xylene
Publisher: World Heritage Encyclopedia

Free-radical halogenation

In halogenation. This chemical reaction is typical of alkanes and alkyl-substituted aromatics under application of UV light. The reaction is used for the industrial synthesis of chloroform (CHCl3), dichloromethane (CH2Cl2), and hexachlorobutadiene. It proceeds by a free-radical chain mechanism.

General mechanism

The chain mechanism is as follows, using the chlorination of methane as a typical example:

1. Initiation: Splitting or homolysis of a chlorine molecule to form two chlorine atoms, initiated by ultraviolet radiation or sunlight. A chlorine atom has an unpaired electron and acts as a free radical.
Methane chlorination: initiation
2. chain propagation (two steps): a hydrogen atom is pulled off from methane leaving a 1˚ methyl radical. The methyl radical then pulls a Cl· from Cl2.

Methane chlorination: propagation

This results in the desired product plus another chlorine radical. This radical will then go on to take part in another propagation reaction causing a chain reaction. If there is sufficient chlorine, other products such as CH2Cl2 may be formed.
3. chain termination: recombination of two free radicals:
Methane chlorination: termination
The last possibility in the termination step will result in an impurity in the final mixture; notably this results in an organic molecule with a longer carbon chain than the reactants.

The net reaction is:

Methane chlorination overall reaction or CH_4 + Cl_2 \xrightarrow{uv\ light} CH_3Cl + HCl

In the case of methane or ethane, all the hydrogen atoms are equivalent and thus have an equal chance of being replaced. This leads to what is known as a statistical product distribution. For propane and higher alkanes, the hydrogen atoms which form part of CH2 (or CH) groups are preferentially replaced.

The reactivity of the different halogens varies considerably. The relative rates are: fluorine (108) > chlorine (1) > bromine (7 × 10−11) > iodine (2 × 10−22). Hence the reaction of alkanes with fluorine is difficult to control, that with chlorine is moderate to fast, that with bromine is slow and requires high levels of UV irradiation while the reaction with iodine is practically non-existent and thermodynamically unfavorable.

A common method in organic synthesis employing is the Wohl–Ziegler reaction, which employs N-bromosuccinimide, which can undergo homolysis to yield a bromine radical and is a free-radical halogenation variant.

Control of halogenation

  • Halogenation often does not stop at monosubstitution. Depending on reaction conditions the chlorination of methane yields dichloromethane, chloroform and carbon tetrachloride.
  • In most hydrocarbons more than one possible product exists depending on which hydrogen is replaced. Butane (CH3−CH2−CH2−CH3), for example, can be chlorinated at the "1" position to give 1-chlorobutane (CH3−CH2-CH2-CH2Cl) or at the "2" position to give 2-chlorobutane (CH3−CH2−CHCl−CH3). The product distribution depends on relative reaction rates: in this case the "2" position of butane reacts faster and 2-chlorobutane is the major product.
  • Chlorination is generally less selective than bromination. Fluorination is not only even less selective than chlorination, but also highly exothermic and care must be taken to prevent an explosion or a runaway reaction. This relationship is often used as a demonstration of the reactivity–selectivity principle and can be explained with the aid of the Hammond postulate. A bromine radical is not very reactive and the transition state for hydrogen abstraction has much radical character and is reached late. The reactive chlorine radical develops a transition state resembling the reactant with little radical character. When the alkyl radical is fully formed in the transition state it can benefit fully from any resonance stabilization present thereby maximizing selectivity.
  • We can also look at the bond dissociation energies (BDE's) to understand the selectivity of bromination. The BDE of a bond is the energy required to break it by homolytic cleavage, and these values can be used to determine if a reaction or step in a reaction is exothermic or endothermic. In a chain reaction step of a Br radical reacting with a hydrogen on a secondary carbon to cleave the H−C bond requires 397 kJ/mol and an H-Br is formed. We can look at the BDE of H−Br (= 366 kJ/mol) and subtract this value from 397 kJ/mol to get +31 kJ/mol. This positive value tells us that this step in the reaction requires energy (endothermic) and the reactants are more stable than the products. Comparing this with the same situation of a Cl radical we see that this step is exothermic (397 − 431 kJ/mol = −20 kJ/mol). From these values we can conclude that in bromination it is more important that the most stable radical (tertiary) be formed during this step and thus it is more selective than chlorination. This is because less energy is required to form the H-Br and tertiary radical (380 − 366 kJ/mol = +14 kJ/mol). This value is 17 kJ/mol less than the secondary radical formation. Iodine does not even participate in free-radical halogenation because the entire reaction is endothermic.
  • It is possible to predict the product distribution of different monochloro derivatives resulting from the chlorination of an alkane with non-equivalent hydrogens.[1][2] From experimentation it has been determined that the relative rates of chlorination to primary, secondary, and tertiary positions are 1, 3.8, and 5 respectively (this ratio is used in the example following this paragraph). This corresponds with alkyl radical stability: tertiary radical species are more stable than secondary radical species, and secondary radical species are more stable than primary radical species—thus any single chlorination will favor substitution at the most substituted carbon. Because of this trend, the percentages of each product formed from the parent radical can be estimated with relatively high accuracy. For example, 2-methyl butane ((CH3)2CHCH2CH3) exhibits the following results:
-For clarity, the unique hydrogens will be labeled as follows:
a=(CH3)2 (primary), b=CH (tertiary), c=CH2 (secondary), d=CH3 (also primary)
-Applying the aforementioned substitution ratios in the formula: ([number of hydrogens]*[ratio factor])/[(primary hydrogens*1) + (secondary hydrogens*3.8) + (tertiary hydrogens*5)]
a:6 × 1 = 6 a= 6/21.6 = 28%
b:1 × 5 = 5 b= 5/21.6 = 23%
c:2 × 3.8 = 7.6 c= 7.6/21.6 = 35%
d:3 × 1 = 3 d= 3/21.6 = 14%
Denominator total for this species = 6 + 5 + 7.6 + 3 = 21.6

Because all six "a" hydrogens, both "c" hydrogens, and the three "d" hydrogens are chemically equivalent with the others in their three classifications (i.e., any "a" hydrogen is equivalent with any other "a" hydrogen), these rates accurately reflect where a single chlorination may take place for 2-methyl butane. The single tertiary hydrogen "b" is nearly as susceptible as the six, primary "a" hydrogens, and almost doubly susceptible as any of the three, also-primary "d" hydrogens, illustrating the radical stability differences between tertiary and primary hydrogens (the secondary "c" hydrogens also follow the radical stability order as previously mentioned).

Free-radical iodination is usually not possible because iodine is too unreactive to form a radical. For the other halogens, free-radical halogenation generally proceeds in the following order:

  • Carbons with one or more aryl substituents (benzylic positions) react faster than:
  • Carbons with three alkyl substituents (tertiary positions), which react faster than:
  • Carbons with two alkyl substituents (secondary positions), which react faster than:
  • Carbons with one or zero substituents (primary positions)

Oxygen is a halogenation inhibitor.

An example of radical bromination of toluene is given below:[3]

bromination of toluene with hydrobromic acid and hydrogen peroxide in water

This reaction takes place oxidation of hydrobromic acid with hydrogen peroxide. An incandescent light bulb is sufficient for bromine radical generation.


  1. ^ Carey, FA. Organic Chemistry, Sixth Edition. New York, NY: McGraw Hill. 2006.
  2. ^ Peters, W. Chemistry 3421 Lecture Notes. University of Colorado, Denver. Radical Halogenation, Fall 2006.
  3. ^ Free radical bromination by the H2O2–HBr system on water Ajda Podgorsˇek Stojan Stavber, Marko Zupana, and Jernej Iskraa Tetrahedron Letters 47 (2006) 7245–7247 doi:10.1016/j.tetlet.2006.07.109
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.