World Library  
Flag as Inappropriate
Email this Article
 

DVD region codes

Not to be confused with the three ITU regions, for managing the global radio spectrum.


DVD region codes are a digital rights management technique designed to allow film distributors to control aspects of a release, including content, release date, and price, according to the region.

This is achieved by way of region-locked DVD players, which will play back only DVDs encoded to their region (plus those without any region code). The commercial DVD player specification requires that a player designed to be sold in a given place play only discs encoded for that region (plus those without any region code). The American DVD Copy Control Association also requires that DVD player manufacturers incorporate the regional-playback control (RPC) system. However, region-free DVD players, which ignore region coding, are also commercially available,[1] and many DVD players can be modified to be region-free, allowing playback of all discs.[2]

DVDs may use one code, a combination of codes (multi-region), every code (all region) or no codes (region free).

Region codes and countries

Region code Area
0 Informal term meaning "worldwide". Region 0 is not an official setting; discs that bear the region 0 symbol either have no flag set or have regions 1–6 flags set. Region 0 is commonly referred to as "Region Free", especially when talking about DVD and Blu-ray Disc players.
1 United States, Canada, Bermuda, Caribbean, U.S. territories
2 Europe, Middle East, Egypt, Japan, South Africa, Swaziland, Lesotho, Greenland, French Overseas departments and territories
3 Southeast Asia, South Korea, Taiwan, Hong Kong, Macau
4 South America, Central America, New Zealand, Australia, Papua New Guinea and much of Oceania
5 Bangladesh, India, Nepal, Afghanistan, Sri Lanka, Ukraine, Belarus, Russia, Kazakhstan, Pakistan, Africa (except Egypt, South Africa, Swaziland, Lesotho), Central Asia, Mongolia, North Korea
6 China
7 Reserved for future use, MPAA-related DVDs and "media copies" of pre-releases in Asia
8 International venues such as aircraft, cruise ships, spacecraft, etc.
ALL Region ALL discs have all eight flags set, allowing the disc to be played in any location, on any player.

DVDs sold in the Baltic states use both region 2 and 5 codes.

Region 0 (playable in all regions except 7 and 8) is widely used by China and the Philippines. DVDs in Hispanophone Latin America use both the region 1 and region 4 codes. Most DVDs in India combine the region 2, region 4, and region 5 codes; Indian Disney discs contain only the region 3 code.

European region 2 DVDs may be sub-coded "D1" to "D4". "D1" are United Kingdom–only releases; "D2" and "D3" are not sold in the UK and Ireland; "D4" are distributed throughout Europe.

Any combination of regions can be applied to a single disc. For example, a DVD designated Region 2/4 is suitable for playback in Western Europe, Oceania, and any other Region 2 or Region 4 area. So-called "Region 0" and "ALL" discs are meant to be playable worldwide.

The term "Region 0" also describes the DVD players designed or modified to incorporate Regions 1–6, thereby providing compatibility with most discs, regardless of region. This apparent solution was popular in the early days of the DVD format, but studios quickly responded by adjusting discs to refuse to play in such machines. This system is known as "Regional Coding Enhancement" (RCE).[3] RCE was not particularly successful largely because its developers failed to properly understand how multi-region players dealt with multiregion disks. In turn, region-free players have all eight flags set, similar to Region ALL DVDs. Many also include RCE breaks, to skip repeating menus or bypass static images.

Region-code enhanced

Region-code enhanced, also known as just "RCE" or "REA",[3] was a retroactive attempt to prevent the playing of one region's discs in another region, even if the disc was played in a region-free player. The scheme was deployed on only a handful of discs. The disc contained the main program material region coded as region 1. But it also contained a short video loop of a map of the world showing the regions, which was coded as region 2, 3, 4, 5, and 6. The intention was that when the disc was played in a non-region 1 player, the player would default to playing the material for its native region. This played the aforementioned video loop of a map, which was impossible to escape from, as the user controls were disabled.

However, the scheme was fundamentally flawed, as a region-free player tries to play a disc using the last region that worked with the previously inserted disc. If it cannot play the disc, then it tries another region until one is found that works. RCE could thus be defeated by briefly playing a "normal" region 1 disc, and then inserting the RCE protected region 1 disc, which would now play. RCE caused a few problems with genuine region 1 players.

As of 2007 many "multi-region" DVD players defeated regional lockout and RCE by automatically identifying and matching a disc's region code and/or allowing the user to manually select a particular region.[4][5] Some manufacturers of DVD players now freely supply information on how to disable regional lockout, and on some recent models, it appears to be disabled by default.[6][7] Computer programs such as DVD Shrink can make copies of region-coded DVDs without RCE restriction.

Purpose

Another purpose is controlling release dates. A practice of movie marketing threatened by the advent of digital home video is to release a movie to cinemas, and then for general sale, later in some countries than in others. This is common partly because releasing a movie at the same time worldwide can be prohibitively expensive. Videotapes were inherently regional since formats had to match those of the encoding system used by television stations in that particular region, such as NTSC and PAL, although from early 1990s PAL machines increasingly offered NTSC playback. DVDs are less restricted in this sense, and region coding allows movie studios to better control the global release dates of DVDs.

One other purpose of region coding is to prevent release of movies that could be offensive in such regions for cultural, religious, and political reasons. Region coding helps prevent release of such films in sensitive territories.

Finally, the copyright in some titles has different owners in different territories. Region coding allows copyright holders to prevent a DVD from being purchased from a region from which they do not derive royalties.

PAL/SECAM vs. NTSC

DVDs are also formatted for use on two conflicting regional television systems: 480i/60 Hz and 576i/50 Hz, which in analog contexts are often referred to as 525/60 (NTSC) and 625/50 (PAL/SECAM) respectively. Strictly speaking, PAL and SECAM are analog color television signal formats which have no relevance in the digital domain (as evident in the conflation of PAL and SECAM, which are actually two distinct analog color systems). However, the DVD system was originally designed to encode the information necessary to reproduce signals in these formats, and the terms continue to be used (incorrectly) as a method of identifying refresh rates and vertical resolution. However, an "NTSC", "PAL" or "SECAM" DVD player that has one or more analog composite video output (baseband or modulated) will only produce NTSC, PAL or SECAM signals, respectively, from those outputs, and may only play DVDs identified with the corresponding format.

NTSC is the analog TV format historically associated with the United States, Canada, Japan, S. Korea, Mexico, Philippines, Taiwan, and other countries. PAL is the analog color TV format historically associated with most of Europe, most of Africa, China, India, Australia, New Zealand, Israel, North Korea, and other countries (and Brazil, but using the refresh rate and resolution commonly associated with NTSC). SECAM, while using the same resolution and refresh rate as PAL, is a distinct format which uses a very different system of color encoding. Some DVD players can only play discs identified as NTSC, PAL or SECAM, while others can play multiple standards.[8]

In general, it is easier for consumers in PAL/SECAM countries to view NTSC DVDs than vice versa. Almost all DVD players sold in PAL/SECAM countries are capable of playing both kinds of discs, and most modern PAL TVs can handle the converted signal. However, most NTSC players cannot play PAL discs, and most NTSC TVs do not accept 576i video signals as used on PAL/SECAM DVDs. Those in NTSC countries, such as the United States, generally require both a region-free, multi-standard player and a multi-standard television to view PAL discs, or a converter box, whereas those in PAL countries generally require only a region-free player to view NTSC discs. There are also differences in pixel aspect ratio (720 × 480 vs. 720 × 576 with the same image aspect ratio) and display frame rate (29.97 vs. 25). Again, NTSC discs can be played on most DVD systems worldwide, while PAL discs play on very few players outside of PAL/SECAM countries.[8]

Most computer-based DVD software and hardware can play both NTSC and PAL video and both audio standards.[8]

^† NTSC discs may be output from a PAL DVD player in three different ways:

  1. using a non-chroma encoded format such as RGB SCART or YPBPR component video.
  2. using PAL 60 encoded composite video/S-Video—a "hybrid" system which uses NTSC's 525/60 line format along with PAL's chroma subcarrier
  3. using NTSC encoded composite video/S-Video.

Implementations of region codes

Standalone DVD players

Usually a configuration flag is set in each player's firmware at the factory. This flag holds the region number that the machine is allowed to play. Region-free players are DVD players shipped without the ability to enforce regional lockout (usually by means of a chip that ignores any region coding), or without this flag set.

However, if the player is not region-free, it can often be unlocked with an unlock code entered via the remote control. This code simply allows the user to change the factory-set configuration flag to another region, or to the special region "0". Once unlocked this way, the DVD player allows the owner to watch DVDs from any region. Many websites exist on the Internet offering these codes, often known informally as hacks. Many websites provide instructions for different models of standalone DVD players, to hack, and their factory codes.

Computer DVD drives

Older DVD drives use RPC-1 ("Regional Playback Control") firmware, which means the drive allows DVDs from any region to play. Newer drives use RPC-2 firmware, which enforces the DVD region coding at the hardware level. These drives can often be reflashed or hacked with RPC-1 firmware, effectively making the drive region-free. This may void the drive warranty.[9]

In most computer drives, users are allowed to change the region code up to five times.[10] If the number of allowances reaches zero, the region last used will be permanent even if the drive is transferred to another computer. This limit is built into the drive's controller software, called firmware. Resetting the firmware count can be done with first- or third-party software tools, or by reflashing (see above) to RPC-1 firmware.

Since some software does not work correctly with RPC-1 drives, there is also the option of reflashing the drive with a so-called auto-reset firmware. This firmware appears as RPC-2 firmware to software, but will reset the region changes counter whenever power is cycled, reverting to the state of a drive that has never had its region code changed.

Software DVD players

Most freeware and open source DVD players, such as VLC, ignore region coding. VLC, for example, does not attempt to enforce region coding; however, it requires access to the DVD's raw data to overcome CSS encryption, and such access may not be available on some drives with RPC-2 firmware when playing a disc from a different region than the region to which the drive is locked. Most commercial players are locked to a region code, but can be easily changed with software.

Other software, known as DVD region killers, transparently remove (or hide) the DVD region code from the software player. Some can also work around locked RPC-2 firmware.

Circumvention

The region coding of a DVD can be circumvented by making a copy that adds flags for all region codes, creating an all-region DVD. DVD backup software can do this, and some can also remove Macrovision, CSS, and disabled user operations (UOps).

In common region-locked DVDs (but not in RCE-DVDs), the region code is stored in the file "VIDEO_TS.IFO" (table "VMGM_MAT"), byte offsets 34 and 35.[11] The eight regions each correspond to a value which is a power of 2: Region 1 corresponds to 1 (20), Region 2 to 2 (21), Region 3 to 4 (22), and so on through Region 8, which corresponds to 128 (27). The values of each region that the disc is not encoded for are added together to give the value in the file. For example, a disc that is encoded for Region 1 but not Regions 2–8 will have the value 2+4+8+16+32+64+128=254. A disc encoded for Regions 1, 2 and 4 will have the value 4+16+32+64+128=244. A region-free or RCE-protected DVD will carry the value zero, since no regions are excluded.

Video game consoles

The Xbox, Xbox 360, PlayStation 2 and PlayStation 3 consoles are all region-locked for DVD playback. The PlayStation 2[12] can be modified to have its regional-locking disabled through the use of modchips. Although region locked on DVD movies and Blu-ray Movies, the PlayStation 3, PlayStation 4 and Xbox One are region free for Video Games.

Blu-ray Disc region codes

Blu-ray Discs use a much simpler region-code system than DVD with only three regions, labeled A, B and C.

Region code Area
A Includes most North, Central and South American countries and Southeast Asian countries including Taiwan, Hong Kong, Macau, Japan and Korea.
B Includes most European and Middle Eastern countries, all of Africa, Australia and New Zealand.
C Includes the remaining central and south Asian countries, as well as China, India, Russia, Belarus, Ukraine and Kazakhstan

UMD region codes

For the UMD, a disc type used for the PlayStation Portable, UMD movies are region-locked, and use roughly the same regions as DVDs do, but UMD video games are region-free.

Criticism and legal concerns

Region-code enforcement has been discussed as a possible violation of World Trade Organization free trade agreements or competition law.[13] The Australian Competition and Consumer Commission (ACCC) has warned that DVD players that enforce region-coding may violate their Competition and Consumer Act 2010.[14][15][16] Under New Zealand copyright law, DVD region codes and the mechanisms in DVD players to enforce them have no legal protection.[17] The practice has also been criticized by the European Commission[18] which as of 2001 March 14 is investigating whether the resulting price discrimination amounts to a violation of EU competition law.[19]

The Washington Post has highlighted how DVD region-coding has been a major inconvenience for travelers who wish to legally purchase DVDs abroad and return with them to their countries of origin, students of foreign languages, immigrants who want to watch films from their homeland and foreign film enthusiasts.[1] Another criticism is that region-coding allows for local censorship. For example, the Region 1 DVD of the drama film Eyes Wide Shut (1999), directed by Stanley Kubrick, contains the digital manipulations necessary for the film to secure an MPAA R-rating, whereas these manipulations are not evident in non–region 1 discs.[20]

See also

Computer science portal
Electronics portal
Film portal
Television portal

References

External links

  • DVD region information with regards to RCE from Home Theater Info
  • Region Coding - Explanations & Help from The DVDCodes Source
  • DVD Code Region Mapping from The Home of DVD Unlocks
  • Amazon.co.uk DVD Regions guide
  • Multi Region Guidede:DVD-Video#Regionalcode

nl:Dvd#Regiocode fi:DVD#Aluekoodit

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.