World Library  
Flag as Inappropriate
Email this Article

Roll-to-roll

Article Id: WHEBN0018105356
Reproduction Date:

Title: Roll-to-roll  
Author: World Heritage Encyclopedia
Language: English
Subject: Screen printing, OLED, Flexible electronics, Proton exchange membrane, Web (manufacturing), R2R, Thin film solar cell
Collection:
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Roll-to-roll

In the field of electronic devices, Roll-to-roll processing, also known as web processing, reel-to-reel processing or R2R, is the process of creating electronic devices on a roll of flexible plastic or metal foil. In other fields predating this use, it can refer to any process of applying coatings, printing, or performing other processes starting with a roll of a flexible material and re-reeling after the process to create an output roll. These processes can be grouped together under the general term converting. Once the rolls of material have been coated, laminated or printed they are normally slit to their finished size on a slitter rewinder.

R2R in electronic devices

Large circuits made with thin-film transistors and other devices can be easily patterned onto these large substrates, which can be up to a few metres wide and 50 km long. Some of the devices can be patterned directly, much like an inkjet printer deposits ink. For most semiconductors, however, the devices must be patterned using photolithography techniques.

Roll-to-roll processing is a technology that is still in development. If semiconductor devices can be fabricated in this way on large substrates, many devices could be fabricated at a fraction of the cost of traditional semiconductor manufacturing methods. Most notable would be solar cells, which are still prohibitively expensive for most markets due to the high cost per unit area of traditional bulk (mono- or polycrystalline) silicon manufacturing. Other applications could arise which take advantage of the flexible nature of the substrates, such as electronics embedded into clothing, large-area flexible displays, and roll-up portable displays.

Thin-film cells

A crucial issue for a roll-to-roll thin-film cell production system is the deposition rate of the microcrystalline layer, and this can be tackled using four approaches:[1]

See also

References

External links


This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.