World Library  
Flag as Inappropriate
Email this Article

Saturation (chemistry)

Article Id: WHEBN0000664554
Reproduction Date:

Title: Saturation (chemistry)  
Author: World Heritage Encyclopedia
Language: English
Subject: Anacardic acids, Membrane lipids, List of rock types, Solvation, Alcohol
Collection:
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Saturation (chemistry)

In chemistry, saturation (from the Latin word saturare, meaning to fill[1]) has diverse meanings, all based on reaching a maximum capacity.

  1. In physical chemistry, saturation is the point at which a solution of a substance can dissolve no more of that substance and additional amounts of it will appear as a separate phase (as a precipitate[2] if solid or as effervescence or inclusion if gaseous). This point of maximum concentration, the saturation point, depends on the temperature and pressure of the solution as well as the chemical nature of the substances involved. This can be used in the process of recrystallisation to purify a chemical: it is dissolved to the point of saturation in hot solvent, then as the solvent cools and the solubility decreases, excess solute precipitates. Impurities, being present in much lower concentration, do not saturate the solvent and so remain dissolved in the liquid. If a change in conditions (e.g. cooling) means that the concentration is actually higher than the saturation point, the solution has become supersaturated.
  2. In physical chemistry, when referring to surface processes, saturation denotes the degree of which a binding site is fully occupied. For example, base saturation refers to the fraction of exchangeable cations that are base cations. Similarly, in environmental soil science, nitrogen saturation means that an ecosystem, such as a soil, cannot store any more nitrogen.
  3. In double or triple bonds. In the case of saturated ethane, each carbon centre has four single bonds as is characteristic of other saturated hydrocarbons, alkanes. In contrast, in ethylene (C2H4), each carbon centre is engaged in two single and one double bond.
    Tallow consists mainly of triglycerides (fats), whose major constituents are derived from the saturated stearic and monounsaturated oleic acids.[3]
    Thus, like other alkenes, ethylene is unsaturated. The degree of unsaturation specifies the amount of hydrogen that a compound can bind. The term is applied similarly to the fatty acid constituents of fats, which can be either saturated or unsaturated, depending on whether the constituent fatty acids contain carbon-carbon double bonds. Unsaturated is used when any carbon structure contains double or occasionally triple bonds. Many vegetable oils contain fatty acids with one (monounsaturated) or more (polyunsaturated) double bonds in them. The bromine number is an index of unsaturation.[4]
  4. In 18 valence electrons and thus is susceptible to oxidative addition or coordination of an additional ligand. Unsaturation is characteristic of many catalysts because it is usually a requirement for substrate activation.[5] In contrast, a coordinatively saturated complex resists undergoing substitution and oxidative addition reactions.
  5. In biochemistry, the term saturation refers to the fraction of total protein binding sites that are occupied at any given time.
  6. In thermodynamics, steam is considered to be saturated if the steam is at sufficient temperature to no longer be in equilibrium with liquid water. At the saturation temperature for a given pressure, cooling the steam will result in condensation and heating steam further will result in super heated steam. The quality (fraction of fluid in the vapor phase) of the steam at such a temperature and pressure is one.

See also

References

  1. ^ Mosby's Medical, Nursing & Allied Health Dictionary, Fourth Edition, Mosby-Year Book Inc., 1994, p. 1394
  2. ^ Defining Solutions
  3. ^ Alfred Thomas (2002). "Fats and Fatty Oils". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH.  
  4. ^ Smith, Michael B.;  
  5. ^ Hartwig, J. F. Organotransition Metal Chemistry, from Bonding to Catalysis; University Science Books: New York, 2010. ISBN 1-891389-53-X
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.