World Library  
Flag as Inappropriate
Email this Article

Socket 478

Article Id: WHEBN0000642072
Reproduction Date:

Title: Socket 478  
Author: World Heritage Encyclopedia
Language: English
Subject: List of Intel codenames, Pentium 4, Infobox CPU/testcases, List of Intel microprocessors, Xpress 200
Collection:
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Socket 478

Socket 478
Type PGA-ZIF
Chip form factors Flip-chip pin grid array (FC-PGA2 or FC-PGA4)
Contacts 478 (not to be confused with the new Socket P that also uses 478-pins)
FSB protocol AGTL+
FSB frequency 400 MT/s
533 MT/s
800 MT/s
Processor dimensions 35 mm x 35 mm[1]
Processors Intel Pentium 4 (1.4 - 3.4 GHz)
Intel Celeron (1.7 - 2.8 GHz)
Celeron D (2.13 - 3.2 GHz)
Intel Pentium 4 Extreme Edition (3.2, 3.4 GHz)
Predecessor Socket 423
Successor LGA 775

This article is part of the CPU socket series

Socket 478 (also known as mPGA478, mPGA478B) is a 478-contact CPU socket used for Intel's Pentium 4 and Celeron series CPUs.

Socket 478 was launched with the Northwood core to compete with AMD's 462-pin Socket A and their Athlon XP processors. Socket 478 was intended to be the replacement for Socket 423, a Willamette-based processor socket which was on the market for only a short time. Socket 478 was phased out with the launch of LGA 775.

Contents

  • Technical specifications 1
  • Mechanical load limits 2
  • See also 3
  • References 4
  • External links 5

Technical specifications

Socket 478 was used for all Northwood Pentium 4 and Celeron processors. It supported the first Prescott Pentium 4 processors and all Willamette Celerons, along with several of the Willamette-series Pentium 4s. Socket 478 also supported the newer Prescott-based Celeron D processors, and early Pentium 4 Extreme Edition processors with 2 MiB of L3 CPU cache.

Celeron D processors were also available for Socket 478 and were the last CPUs made for the socket.

While the Intel mobile CPUs are available in 478-pin packages, they in fact only operate in a range of slightly differing sockets, Socket 479, Socket M, and Socket P, each incompatible with the other two.

Mechanical load limits

All socket (Pentium 4 and Celeron) have the following mechanical maximum load limits which should not be exceeded during heatsink assembly, shipping conditions, or standard use. Load above those limits will crack the processor die and make it unusable.

Location Dynamic Static Transient
IHS Surface 890 N(200 lbf) 445 N(100 lbf) 667 N(150 lbf)

See also

References

  1. ^ "Intel Pentium 4 Datasheet". 

External links

  • Socket information
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.