World Library  
Flag as Inappropriate
Email this Article

Sound-in-Syncs

Article Id: WHEBN0009731283
Reproduction Date:

Title: Sound-in-Syncs  
Author: World Heritage Encyclopedia
Language: English
Subject: CCIR System H, CCIR System G, BBC Research & Development, VIT signals, CCIR System A
Collection: Bbc Research & Development, Broadcast Engineering, History of Television, Sound, Television Technology, Video Formats
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Sound-in-Syncs

Sound-in-Syncs is a method of multiplexing sound and video signals into a channel designed to carry video, in which data representing the sound is inserted into the line synchronising pulse of an analogue television waveform. This is used on point-to-point links within broadcasting networks, including studio/transmitter links (STL). It is not used for broadcasts to the public.

Contents

  • History 1
    • Awards 1.1
  • Versions 2
    • Original mono S-i-S 2.1
    • Ruggedised S-i-S 2.2
    • Stereo S-i-S 2.3
    • ITV S-i-S 2.4
  • Notes and references 3
  • Further reading 4

History

The technique was first developed by the BBC in the late 1960s. In 1966, The corporation's Research Department made a feasibility study of the use of pulse-code modulation (PCM) for transmitting television sound during the synchronising period of the video signal. This had several advantages: it removed the necessity for a separate sound link and offered improved sound quality and reliability.[1]

Awards

Sound-in-Syncs and its R&D engineers have won several awards, including:

Versions

Original mono S-i-S

In the original system, as applied to 625 line analogue TV, the audio signal was sampled twice during each television line and each sample converted to 10-bit PCM. Two such samples were inserted into the next line synchronising pulse. At the destination, the audio samples were converted back to analogue form and the video waveform restored to normal. Compandors operating on the signal before encoding and after decoding enabled the required signal-to-noise ratio to be achieved. As the PCM noise was predominantly high-pitched, the compandor only needed to operate on the high frequencies. Also, the compandor only operated at high audio levels, so that modulation of the noise by the companding would be masked by the relatively loud high-frequency audio components. A pilot tone at half the sampling frequency was transmitted to enable the expander to track the gain adjustment applied by the compressor, even when the latter was limiting.[1]

Following successful trials with the BBC, in 1971 Pye TVT started to make and sell the S-i-S equipment under licence. The largest quantities went to the BBC itself, to the EBU and to Canada. Smaller numbers went to other countries including South Africa, Australia and Japan.[5]

Ruggedised S-i-S

A ruggedised version of the system was developed, which provided about 7 kHz audio bandwidth, for use over noisy or difficult microwave paths, such as those often encountered for outside broadcasts.[6]

Stereo S-i-S

Later systems, developed in the 1980s, used 14-bit linear PCM samples, digitally companded into 10-bit samples by means of NICAM-3 lossy compression. These were capable of carrying two audio channels and were known as stereo Sound-in-Syncs.

ITV S-i-S

The ITV network used coders and encoders produced by RE of Denmark. The two variations of Sound-in-Syncs used by the BBC and ITV were not compatible. The terms DCSIS or DSIS was commonly used in ITV to describe dual channel Sound-in-Syncs. Very often material carried was dual mono and not stereo.

Notes and references

  1. ^ a b Pawley, E (1972). BBC Engineering 1922-1972, pp. 506-7, 522. BBC. ISBN 0-563-12127-0.
  2. ^ BBC Research: RTS Awards
  3. ^ BBC Research: Queen's Awards
  4. ^ BBC Research: Emmy Award for Sound in Syncs
  5. ^ Holder, J.E., Spenceley, N.M. and Clementson, C.S. (1984), A two channel sound in syncs transmission system, IBC 1984, IEE Conference Publication No. 240, p. 345
  6. ^ , BBC Engineering, No. 86, April 1971, pp 18-28.A P.C.M. Sound-in-Syncs System for Outside BroadcastsDalton, C.J. (1971),

Further reading

  • Waveform Specification of the BBC Sound-in-Syncs Equipment, EBU Review, 121A, June 1970.
  • Chorley, J.M. and Shorter, D.E.L. (1970), P.C.M. Sound-in-Syncs: Operational Systems for Video Distribution and Contribution Networks, IEE Conference Publication, No. 69, 1970 International Broadcasting Convention
  • Dalton, C.J. (1968), The Distribution of Television Sound Signals by PCM Signals incorporated in the Vision Waveform, IEE International Broadcasting Convention, September 1968, Vol. 46, Part 1
  • , BBC Engineering Monograph, No. 67, May 1967Pulse sound: a system of television sound broadcasting using pulses in the video waveformSanders, J.R. (1967),
  • BBC Research Department report (PDF)Pulse-code modulation for high-quality sound signal distribution: Incorporation of the sound signal in the video signal.Sanders, J.R. (1968)
  • , BBC Engineering Monograph, No. 75, December 1968Pulse code modulation for high-quality sound signal distributionShorter, D.E.L., Chew, J.R., Howarth, D. and Sanders, J.R. (1968),
  • Shorter, D.E.L. (1969), The Distribution of Television Sound by Pulse-code Modulation Signals incorporated in the Video Waveform, EBU Review, No. 113A, February 1969
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.