Bell 409

Bell 409 / YAH-63A
A YAH-63A prototype
Role Attack helicopter prototype
Manufacturer Bell Helicopter Textron
First flight 1 October 1975
Primary user United States Army
Number built 3

The Bell Model 409/YAH-63 was an experimental attack helicopter for the Advanced Attack Helicopter (AAH) competition. Hughes' Model 77/YAH-64, later developed into the AH-64 Apache, was selected over Bell's entry.

Design and development

During the mid-1960s, United States Army initiated the Advanced Aerial Fire Support System (AAFSS) program to develop the Lockheed AH-56 Cheyenne for the anti-tank gunship role. The U.S. Army pursued the AH-1G HueyCobra as an interim type for the "jungle fighting" role. However the Army's broader concern was the task of protecting Western Europe from the legions of Warsaw Pact armor to the east.[1]

In 1972, the Army conducted an evaluation between the Bell Model 309 KingCobra, the Lockheed Cheyenne, and the Sikorsky S-67 in a competitive fly-off. The fly-off began in the spring of 1972 and was completed in July. In August, somewhat to everyone's shock, the Army rejected all three competitors.[2]

Difficulties delayed the AH-56 Cheyenne development. The Army canceled the Cheyenne program in August 1972. Controversy over the Cheyenne's role in combat and the political climate regarding military acquisition programs caused the Army to amend the service's attack helicopter requirements in favor of a simpler and more survivable conventional helicopter.[3][4]

Bell 409

The Army sought an aircraft to fill an anti-armor attack role. The Army wanted an aircraft better than the AH-1 Cobra in firepower, performance and range. The aircraft would have the maneuverability to fly nap-of-the-earth (NoE) missions. To this end the U.S. Army issued a request for proposals (RFP) for an Advanced Attack Helicopter (AAH) in 1972.[5][4]

The Army specified that the AAH was to be powered by twin General Electric T700 turboshaft engines with 1,500 shp (1,120 kW) each. This was the same powerplant fit specified for a new Army utility helicopter competition that would be won by the Sikorsky S-70 Black Hawk. The AAH would be armed with a 30 millimeter cannon and sixteen BGM-71 TOW anti-tank missiles. The missile armament specification was later modified to include an alternate load of sixteen laser-guided AGM-114 Hellfire anti-tank missiles. Hellfire was then in development and promised greater range and lethality than TOW.[2]

Bell, Boeing-Vertol (teamed with Grumman), Hughes, Lockheed, and Sikorsky all submitted proposals for the AAH program. In June 1973 Bell and Hughes were selected as finalists, and each was awarded a contract for the construction of two prototype aircraft.[6]

The Bell entry, the Model 409 (YAH-63), was by no means "just another Cobra design" though it utilized Cobra technology where possible. Although it had what had become by then the typical configuration for a helicopter gunship, with a sharklike fuselage, tandem crew seating, and stub wings for armament, the YAH-63 was largely a new machine.[2]

Distinctive features included wheeled tricycle landing gear, flat canopy window plates, an unusual "tee" tail, a large ventral fin, and a three-barreled General Electric XM-188 30 millimeter cannon. The YAH-63's rotor mast could be lowered and the landing gear could kneel to reduce its height for transport.[7] One less noticeable feature was that the pilot occupied the front seat instead of the back, the reverse of the AH-1's arrangement. This was believed to be more prudent since the YAH-63 was intended to fly "in the treetops" during NoE operations, and the pilot needed to have a clear view of the aircraft's surroundings.[2]

The first prototype of the YAH-63 (serial 73-22246)[8] made its initial flight on 1 October 1975. This rotorcraft crashed in June 1976 but a static test prototype was brought up to flight standard and, along with the second prototype (73-22247), entered the flyoff against the Hughes entry, the Model 77 (YAH-64).[2]

The YAH-64 was selected in December 1976 and was developed into the production AH-64 Apache version. The Army believed that the YAH-63's two-blade rotor was more vulnerable to damage than the Apache's four-bladed rotor. In addition the service did not like the YAH-63's tricycle landing gear scheme, believing it was less stable than the Apache's "taildragger" configuration. Some observers also suspected the Army did not want to divert Bell from AH-1 production.[2] Bell would use its experience with the T700 engine to develop the AH-1T+ design and later AH-1W.[9]

Operators

Specifications (YAH-63)

Data from The International Directory of Military Aircraft, 2002-2003[10]

General characteristics
  • Crew: 2: one pilot, one CPG (co-pilot/gunner)
  • Length: 44 ft 7 in (13.6 m)
  • Rotor diameter: 48 ft (14.6 m)
  • Height: 13 ft 5 in (4.1 m)
  • Disc area: 530.83 ft² (168.1 m²)
  • Empty weight: 6,600 lb (2,993 kg)
  • Max. takeoff weight: 14,750 lb (4,500 kg)
  • Powerplant: 2 × General Electric T700 turboshaft, 1,680 shp (1,300 kW) each

Performance

Armament
  • XM188 Gatling gun 3-barreled 30 mm cannon
  • 2.75 in (70 mm) rockets: 14 rockets mounted in M or M launchers
  • TOW Missiles: 4 or 8 missiles mounted in two-missile launchers on each hardpoint
  • See also

    Related development
    Aircraft of comparable role, configuration and era

    Related lists

    References

    External links

    • YAH-63 Helicopter Crashworthiness Simulation and Analysis. U.S. Army, February 1983.
    This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
     
    Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
     
    By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.