World Library  
Flag as Inappropriate
Email this Article

Brass instrument valve

Article Id: WHEBN0029383501
Reproduction Date:

Title: Brass instrument valve  
Author: World Heritage Encyclopedia
Language: English
Subject: Valves, French horn
Collection: Brass Instrument Parts and Accessories, Valves
Publisher: World Heritage Encyclopedia

Brass instrument valve

Brass instrument valves are valves used to change the length of tubing of a brass instrument allowing the player to reach the notes of various harmonic series. Each valve pressed diverts the air stream through additional tubing, individually or in conjunction with other valves. This lengthens the vibrating air column thus lowering the fundamental tone and associated harmonic series produced by the instrument. Valves in brass instruments require regular maintenance and lubrication to ensure fast and reliable movement.

Trumpet valve bypass (depressed)


  • Piston valve 1
  • Rotary valve 2
  • Axial flow valve 3
  • Double-piston valve 4
  • Stölzel valve 5
  • References 6
  • External links 7

Piston valve

The first piston-valved musical instruments were developed just after the start of the 19th century. The Stölzel valve (invented by Heinrich Stölzel in 1814) was an early variety. The piston valve found in the majority of valved brass instruments was invented in 1838 and patented in 1839. They are sometimes called Périnet valves after their inventor, François Périnet.[1] They work by diverting air obliquely through ports in the stock of the valve so that a loop of tubing is included in the air stream, lowering the pitch. The stock of the valve is cylindrical and moves up and down through a larger cylindrical casing.

Rotary valve

The rotary valve works using a short circular plug housed in a larger cylindrical casing. Ports are cut along one plane through the stock and direct the airflow into the lengths of tubing when the stock is rotated 90 degrees. Trombone F-attachment valves are usually rotary, with several variations on the basic design also in use, such as the Thayer axial flow valve and Hagmann valve. French horns almost always have rotary valves, and many tubas have rotary valves. Joseph Riedlin is credited with the first use of rotary valves on brass instruments in 1832.[2]

Axial flow valve

The Thayer axial flow valve is a replacement for the traditional rotary valve found on trombones with F attachments. Invented by Orla Ed Thayer (with assistance from Zig Kanstul) in 1976. It uses a conical plug, allowing a deflection of the airflow by only 25 degrees or less.

Double-piston valve

The double-piston valve, also called the Vienna valve or pumpenvalve, is a type of valve that preceded the modern single piston Périnet valve. It was first produced in a trumpet in 1821 by Christian Friedrich Sattler of Leipzig.[3] In this valve type, the simultaneous movement of two pistons bends the air flow in two right angles to introduce an additional valve loop. These turns cause constrictions in the bore, that make the instrument harder to play, but they are still used today despite their drawbacks. At first, the two pistons were operated by a lever connected with braces, but the later Vienna model of these valves was operated by long rods connecting the pistons to spring-loaded keys on the other side of the instrument. They are called “Vienna valves” because while they have fallen out of favor in comparison with the modern rotary valve in almost all places, they are still used almost exclusively in Vienna, Austria, where players prefer the more smooth legato and mellow, natural horn-like tone.

Stölzel valve

The Stölzel valve bears the name of its inventor, Heinrich Stölzel, who first applied these valves to the french horn in 1814. Until that point, there had been no successful valve design, and horn players had to stop off the bell of the instrument, greatly compromising tone quality to achieve partial music.[4] In a Stölzel valve, the air enters through the bottom of the valve casing, up through the hollow bottom end of the piston, and through a port to the valve loop. The air is then led through an oblique port in the piston to a short tube connecting the valves where it is then directed through the second valve and out the bottom. This type of valve, however, had inherent problems. It forced the air to double back on itself and the 90 degree turns disrupted the bore, causing significant undesired back-pressure. These problems were improved upon later by the double-piston valve.[5]


  1. ^
  2. ^
  3. ^
  4. ^
  5. ^

External links

  • National Music Museum, Elements of Brass Construction
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.