World Library  
Flag as Inappropriate
Email this Article

Buffer (computer science)

Article Id: WHEBN0013491892
Reproduction Date:

Title: Buffer (computer science)  
Author: World Heritage Encyclopedia
Language: English
Subject: Backplane, Queue (abstract data type), String (computer science), Windows 95, Queuing delay, PILOT, Direct3D, Z-buffering, Framebuffer, Computer terminal
Collection:
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Buffer (computer science)

In computer science, a buffer is a region of a physical memory storage used to temporarily store data while it is being moved from one place to another. Typically, the data is stored in a buffer as it is retrieved from an input device (such as a microphone) or just before it is sent to an output device (such as speakers). However, a buffer may be used when moving data between processes within a computer. This is comparable to buffers in telecommunication. Buffers can be implemented in a fixed memory location in hardware—or by using a virtual data buffer in software, pointing at a location in the physical memory. In all cases, the data stored in a data buffer are stored on a physical storage medium. A majority of buffers are implemented in software, which typically use the faster RAM to store temporary data, due to the much faster access time compared with hard disk drives. Buffers are typically used when there is a difference between the rate at which data is received and the rate at which it can be processed, or in the case that these rates are variable, for example in a printer spooler or in online video streaming.

A buffer often adjusts timing by implementing a queue (or FIFO) algorithm in memory, simultaneously writing data into the queue at one rate and reading it at another rate.

Applications

Buffers are often used in conjunction with I/O to hardware, such as disk drives, sending or receiving data to or from a network, or playing sound on a speaker. A line to a rollercoaster in an amusement park shares many similarities. People who ride the coaster come in at an unknown and often variable pace, but the roller coaster will be able to load people in bursts (as a coaster arrives and is loaded). The queue area acts as a buffer—a temporary space where those wishing to ride wait until the ride is available. Buffers are usually used in a FIFO (first in, first out) method, outputting data in the order it arrived.

Telecommunication buffer

A buffer routine or storage medium used in telecommunications compensates for a difference in rate of flow of data, or time of occurrence of events, when transferring data from one device to another.

Buffers are used for many purposes, including:

  • Interconnecting two digital circuits operating at different rates,
  • Holding data for later use,
  • Allowing timing corrections to be made on a data stream,
  • Collecting binary data bits into groups that can then be operated on as a unit,
  • Delaying the transit time of a signal in order to allow other operations to occur.

Buffer versus cache

A cache often also acts as a buffer, and vice versa. However, cache operates on the premise that the same data will be read from it multiple times, that written data will soon be read, or that there is a good chance of multiple reads or writes to combine to form a single larger block. Its sole purpose is to reduce accesses to the underlying slower storage. Cache is also usually an abstraction layer that is designed to be invisible.

A "Disk Cache" or "File Cache" keeps statistics on the data contained within it and commits data within a time-out period in write-back modes. A buffer does none of this.

A buffer is primarily used for input, output, and sometimes very temporary storage of data that is either en route between other media or data that may be modified in a non-sequential manner before it is written (or read) in a sequential manner.

Good examples include:

  • The BUFFERS command/statement in CONFIG.SYS of DOS.
  • The buffer between a serial port (UART) and a MODEM. The COM port speed may be 38400 bit/s while the MODEM may only have a 14400 bit/s carrier.
  • The integrated buffer on a Hard Disk Drive, Printer or other piece of hardware.
  • The Framebuffer on a video card.

History

An early mention of a print buffer is the Outscriber devised by image processing pioneer Russel A. Kirsch for the SEAC computer in 1952

[1]

One of the most serious problems in the design of automatic digital computers is that of getting the calculated results out of the machine rapidly enough to avoid delaying the further progress of the calculations. In many of the problems to which a general-purpose computer is applied the amount of output data is relatively big —so big that serious inefficiency would result from forcing the computer to wait for these data to be typed on existing printing devices. This difficulty has been solved in the SEAC by providing magnetic recording devices as output units. These devices are able to receive information from the machine at rates up to 100 times as fast as an electric typewriter can be operated. Thus, better efficiency is achieved in recording the output data; transcription can be made later from the magnetic recording device to a printing device without tying up the main computer.

See also

References

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.