World Library  
Flag as Inappropriate
Email this Article

Center gauge

Article Id: WHEBN0001646848
Reproduction Date:

Title: Center gauge  
Author: World Heritage Encyclopedia
Language: English
Subject: Piercing saw, Engineer's spirit level, Beam compass, Hand scraper, Straightedge
Collection: Dimensional Instruments, Metalworking Measuring Instruments
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Center gauge

Two different thread setting gauges

Center gauges and fishtail gauges are gauges used in lathe work for checking the angles when grinding the profiles of single-point screw-cutting tool bits and centers. In the image, the gauge on the left is called a fishtail gauge or center gauge, and the one on the right is another style of center gauge.

These gauges are most commonly used when hand-grinding threading tool bits on a bench grinder, although they may be used with tool and cutter grinders.

When the tool bit has been ground to the correct angle, they may then be used to set the tool perpendicular to the workpiece.

They can incorporate a range of sizes and types on the one gauge, the two most common being metric or UNS at 60°, and BSW at 55°. Gauges also exist for the Acme thread form.



This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.