World Library  
Flag as Inappropriate
Email this Article

Colour television

Article Id: WHEBN0001390110
Reproduction Date:

Title: Colour television  
Author: World Heritage Encyclopedia
Language: English
Subject: Coronation Street, ATV (Australia), Prime7, John Paul Young, Eddie Keher, Jimmy Doyle, TV One (New Zealand), Ein Kessel Buntes, 1978 in Malaysia, ABN (TV station)
Publisher: World Heritage Encyclopedia

Colour television

Color television is part of the history of television, the technology of television and practices associated with television's transmission of moving images in color video.

In its most basic form, a color broadcast can be created by broadcasting three monochrome images, one each in the three colors of red, green and blue (RGB). When displayed together or in rapid succession, these images will blend together to produce a full color image as seen by the viewer.

One of the great technical challenges of introducing color broadcast television was the desire to conserve bandwidth, potentially three times that of the existing black-and-white standards, and not use an excessive amount of radio spectrum. In the United States, after considerable research, the National Television Systems Committee[1] approved an all-electronic system developed by RCA which encoded the color information separately from the brightness information and greatly reduced the resolution of the color information in order to conserve bandwidth. The brightness image remained compatible with existing black-and-white television sets at slightly reduced resolution, while color televisions could decode the extra information in the signal and produce a limited-resolution color display. The higher resolution black-and-white and lower resolution color images combine in the eye to produce a seemingly high-resolution color image. The NTSC standard represented a major technical achievement.

Although all-electronic color was introduced in the U.S. in 1953,[2] high prices and the scarcity of color programming greatly slowed its acceptance in the marketplace. The first national color broadcast (the 1954 Tournament of Roses Parade) occurred on January 1, 1954, but during the following ten years most network broadcasts, and nearly all local programming, continued to be in black-and-white. It was not until the mid-1960s that color sets started selling in large numbers, due in part to the color transition of 1965 in which it was announced that over half of all network prime-time programming would be broadcast in color that fall. The first all-color prime-time season came just one year later.

Early color sets were either floor-standing console models or tabletop versions nearly as bulky and heavy, so in practice they remained firmly anchored in one place. The introduction of GE's relatively compact and lightweight Porta-Color set in the spring of 1966 made watching color television a more flexible and convenient proposition. In 1972, sales of color sets finally surpassed sales of black-and-white sets. Also in 1972, the last holdout among daytime network programs converted to color, resulting in the first completely all-color network season.

Color broadcasting in Europe was not standardized on the PAL format until the 1960s, and broadcasts did not start until 1967. By this point many of the technical problems in the early sets had been worked out, and the spread of color sets in Europe was fairly rapid.

By the mid-1970s, the only stations broadcasting in black-and-white were a few high-numbered UHF stations in small markets, and a handful of low-power repeater stations in even smaller markets such as vacation spots. By 1979, even the last of these had converted to color and by the early 1980s B&W sets had been pushed into niche markets, notably low-power uses, small portable sets, or use as video monitor screens in lower-cost consumer equipment, in the television production and post-production industry.


The human eye's detection system in the retina consists primarily of two types of light detectors, rod cells that capture light, dark, and shapes/figures, and the cone cells that detect color. A typical retina contains 120 million rods and 4.5 million to 6 million cones, which are divided among three groups that are sensitive to red, green and blue light. This means that the eye has far more resolution in brightness, or "luminance", than in color. However, post-processing in the optic nerve and other portions of the human visual system combine the information from the rods and cones to re-create what appears to be a high-resolution color image.

The eye has limited bandwidth to the rest of the visual system, estimated at just under 8 Mbit/s.[3] This manifests itself in a number of ways, but the most important in terms of producing moving images is the way that a series of still images displayed in quick succession will appear to be continuous smooth motion. This illusion starts to work at about 16 frame/s, and common motion pictures use 24 frame/s. Television, using power from the electrical grid, tunes its rate in order to avoid interference with the alternating current being supplied – in North America, some Central and South American countries, Taiwan, Korea, part of Japan, the Philippines and a few other countries this is 60 video fields per second to match the 60 Hz power, while in most other countries it is 50 fields per second to match the 50 Hz power.

Early television

Experiments in television systems using radio broadcasts date to the 19th century, but it was not until the 20th century that advances in electronics and light detectors made development practical. A key problem was the need to convert a 2D image into a "1D" radio signal; some form of image scanning was needed to make this work. Early systems generally used a device known as a "Nipkow disk", which was a spinning disk with a series of holes punched in it that caused a spot to scan across and down the image. A single photodetector behind the disk captured the image brightness at any given spot, which was converted into a radio signal and broadcast. A similar disk was used at the receiver side, with a light source behind the disk instead of a detector.

A number of such systems were being used experimentally in the 1920s. The best-known was John Logie Baird's, which was actually used for regular public broadcasting in Britain for several years. Indeed, Baird's system was demonstrated to members of the Royal Society in London in 1926 in what is generally recognized as the first demonstration of a true, working television system. In spite of these early successes, all mechanical television systems shared a number of serious problems. Being mechanically driven, perfect synchronization of the sending and receiving discs was not easy to ensure, and irregularities could result in major image distortion. Another problem was that the image was scanned within a small, roughly rectangular area of the disk's surface, so that larger, higher-resolution displays required increasingly unwieldy disks and smaller holes that produced increasingly dim images. Rotating drums bearing small mirrors set at progressively greater angles proved more practical than Nipkow discs for high-resolution mechanical scanning, allowing images of 240 lines and more to be produced, but such delicate, high-precision optical components were not commercially practical for home receivers.

It was clear to a number of developers that a completely electronic scanning system would be superior, and that the scanning could be achieved in a vacuum tube via electrostatic or magnetic means. Converting this concept into a usable system took years of development and several independent advances. The two key advances were Philo Farnsworth's electronic scanning system, and Vladimir Zworykin's Iconoscope camera. The Iconoscope, based on Kálmán Tihanyi's early patents, superseded the Wordsworth-system. With these systems, the BBC began regularly scheduled black-and-white television broadcasts in 1936, but these were shut down again with the start of World War II in 1939.

By 22 March 1935, 108-line black-and-white television programs were being broadcast from the Paul Nipkow TV transmitter in Berlin. In 1936, under the guidance of "Minister of Public Enlightenment and Propaganda" Joseph Goebbels, direct transmissions from fifteen mobile units at the Olympic Games in Berlin were transmitted to selected small television houses (Fernsehstuben) in Berlin and Hamburg.

In 1941 the first NTSC meetings produced a single standard for US broadcasts. US television broadcasts began in earnest in the immediate post-war era, and by 1950 there were 6 million televisions in the United States.[4]

All-mechanical color

The basic idea of using three monochrome images to produce a color image had been experimented with almost as soon as black-and-white televisions had first been built.

Among the earliest published proposals for television was one by Maurice Le Blanc in 1880 for a color system, including the first mentions in television literature of line and frame scanning, although he gave no practical details.[5] Polish inventor Jan Szczepanik patented a color television system in 1897, using a selenium photoelectric cell at the transmitter and an electromagnet controlling an oscillating mirror and a moving prism at the receiver. But his system contained no means of analyzing the spectrum of colors at the transmitting end, and could not have worked as he described it.[6] Another inventor, Hovannes Adamian, also experimented with color television as early as 1907.

Scottish inventor John Logie Baird demonstrated the world's first color transmission on July 3, 1928, using scanning discs at the transmitting and receiving ends with three spirals of apertures, each spiral with filters of a different primary color; and three light sources at the receiving end, with a commutator to alternate their illumination.[7] Baird also made the world's first color broadcast on February 4, 1938, sending a mechanically scanned 120-line image from Baird's Crystal Palace studios to a projection screen at London's Dominion Theatre.[8]

Mechanically scanned color television was also demonstrated by Bell Laboratories in June 1929 using three complete systems of photoelectric cells, amplifiers, glow-tubes, and color filters, with a series of mirrors to superimpose the red, green, and blue images into one full color image.

Hybrid systems

As was the case with black-and-white television, an electronic means of scanning would be superior to the mechanical systems like Baird's. The obvious solution on the broadcast end would be to use three conventional Iconoscopes with colored filters in front of them to produce an RGB signal. Using three separate tubes each looking at the same scene would produce slight differences in parallax between the frames, so in practice a single lens was used with a mirror or prism system to separate the colors for the separate tubes. Each tube captured a complete frame and the signal was converted into radio in a fashion essentially identical to the existing black-and-white systems.

The problem with this approach was there was no simple way to recombine them on the receiver end. If each image was sent at the same time on different frequencies, the images would have to be "stacked" somehow on the display, in real time. The simplest way to do this would be to reverse the system used in the camera; arrange three separate black-and-white displays behind colored filters and then optically combine their images using mirrors or prisms onto a suitable screen, like frosted glass. RCA built just such a system in order to present the first electronically scanned color television demonstration on February 5, 1940, privately shown to members of the US Federal Communications Commission at the RCA plant in Camden, New Jersey.[9] This system, however, suffered from the twin problems of costing at least three times as much as a conventional black-and-white set, as well as having very dim images, the result of the fairly low illumination given off by tubes of the era. Projection systems of this sort would become common decades later, however, with improvements in technology.

Another solution would be to use a single screen, but break it up into a pattern of closely spaced colored phosphors instead of an even coating of white. Three receivers would be used, each sending its output to a separate electron gun, aimed at its colored phosphor. Although obvious, this solution was not practical. The electron guns used in monochrome televisions had limited resolution, and if one wanted to retain the resolution of existing monochrome displays, the guns would have to focus on individual dots three times smaller. This was beyond the state of the art at the time.

Instead, a number of hybrid solutions were developed that combined a conventional monochrome display with a colored disk or mirror. In these systems the three colored images were sent one after each other, in either complete frames in the "field-sequential color system", or for each line in the "line-sequential" system. In both cases a colored filter was rotated in front of the display in sync with the broadcast. Since three separate images were being sent in sequence, if they used existing monochrome radio signaling standards they would have an effective refresh rate of only 20 fields, or 10 frames, a second, well into the region where flicker would become visible. In order to avoid this, these systems increased the frame rate considerably, making the signal incompatible with existing monochrome standards.

The first practical example of this sort of system was again pioneered by John Logie Baird. In 1940 he publicly demonstrated a color television combining a traditional black-and-white display with a rotating colored disk. This device was very "deep", but was later improved with a mirror folding the light path into an entirely practical device resembling a large conventional console.[10] However, Baird was not happy with the design, and as early as 1944 had commented to a British government committee that a fully electronic device would be better.

In 1939, Hungarian engineer Peter Carl Goldmark introduced an electro-mechanical system while at CBS, which contained an Iconoscope sensor. The CBS field-sequential color system was partly mechanical, with a disc made of red, blue, and green filters spinning inside the television camera at 1,200 rpm, and a similar disc spinning in synchronization in front of the cathode ray tube inside the receiver set.[11] The system was first demonstrated to the Federal Communications Commission (FCC) on August 29, 1940, and shown to the press on September 4.[12][13][14][15]

CBS began experimental color field tests using film as early as August 28, 1940, and live cameras by November 12.[16] NBC (owned by RCA) made its first field test of color television on February 20, 1941. CBS began daily color field tests on June 1, 1941.[17] These color systems were not compatible with existing black-and-white television sets, and as no color television sets were available to the public at this time, viewing of the color field tests was restricted to RCA and CBS engineers and the invited press. The War Production Board halted the manufacture of television and radio equipment for civilian use from April 22, 1942 to August 20, 1945, limiting any opportunity to introduce color television to the general public.[18][19]

Fully electronic

As early as 1940, Baird had started work on a fully electronic system he called the "Telechrome". Early Telechrome devices used two electron guns aimed at either side of a phosphor plate. The phosphor was patterned so the electrons from the guns only fell on one side of the patterning or the other. Using cyan and magenta phosphors, a reasonable limited-color image could be obtained. He also demonstrated the same system using monochrome signals to produce a 3D image (called "stereoscopic" at the time). A demonstration on August 16, 1944 was the first example of a practical color television system. Work on the Telechrome continued and plans were made to introduce a three-gun version for full color. However, Baird's untimely death in 1946 ended development of the Telechrome system.[20][21]

Similar concepts were common through the 1940s and 50s, differing primarily in the way they re-combined the colors generated by the three guns. The Geer tube was similar to Baird's concept, but used small pyramids with the phosphors deposited on their outside faces, instead of Baird's 3D patterning on a flat surface. The Penetron used three layers of phosphor on top of each other and increased the power of the beam to reach the upper layers when drawing those colors. The Chromatron used a set of focusing wires to select the colored phosphors arranged in vertical stripes on the tube.

FCC color

In the immediate post-war era the Federal Communications Commission (FCC) was inundated with requests to set up new television stations. Worrying about congestion of the limited number of channels available, the FCC put a moratorium on all new licenses in 1948 while considering the problem. A solution was immediately forthcoming; rapid development of radio receiver electronics during the war had opened a wide band of higher frequencies to practical use, and the FCC set aside a large section of these new UHF bands for television broadcast. At the time, black and white television broadcasting was still in its infancy in the U.S., and the FCC started to look at ways of using this newly available bandwidth for color broadcasts. Since no existing television would be able to tune in these stations, they were free to pick an incompatible system and allow the older VHF channels to die off over time.

The FCC called for technical demonstrations of color systems in 1948, and the Joint Technical Advisory Committee (JTAC) was formed to study them. CBS displayed improved versions of its original design, now using a single 6 MHz channel (like the existing black-and-white signals) at 144 fields per second and 405 lines of resolution. Color Television Inc. demonstrated its line-sequential system, while Philco demonstrated a dot-sequential system based on its "Apple" tube technology. Of the entrants, the CBS system was by far the best-developed, and won head-to-head testing every time.

While the meetings were taking place it was widely known within the industry that RCA was working on a dot-sequential system that was compatible with existing black-and-white broadcasts, but RCA declined to demonstrate it during the first series of meetings. Just before the JTAC presented its findings, on August 25, 1949, RCA broke its silence and introduced its system as well. The JTAC still recommended the CBS system, and after the resolution of an ensuing RCA lawsuit, color broadcasts using the CBS system started on June 25, 1951. By this point the market had changed dramatically; when color was first being considered in 1948 there were fewer than a million television sets in the U.S., but by 1951 there were well over 10 million. The idea that the VHF band could be allowed to "die" was no longer practical.

During its campaign for FCC approval, CBS gave the first demonstrations of color television to the general public, showing an hour of color programs daily Mondays through Saturdays, beginning January 12, 1950, and running for the remainder of the month, over WOIC in Washington, D.C., where the programs could be viewed on eight 16-inch color receivers in a public building.[22] Due to high public demand, the broadcasts were resumed February 13–21, with several evening programs added.[23] CBS initiated a limited schedule of color broadcasts from its New York station WCBS-TV Mondays to Saturdays beginning November 14, 1950, making ten color receivers available for the viewing public.[24][25] All were broadcast using the single color camera that CBS owned.[26] The New York broadcasts were extended by coaxial cable to Philadelphia's WCAU-TV beginning December 13,[27] and to Chicago on January 10,[28][29] making them the first network color broadcasts.

After a series of hearings beginning in September 1949, the FCC found the RCA and CTI systems fraught with technical problems, inaccurate color reproduction, and expensive equipment, and so formally approved the CBS system as the U.S. color broadcasting standard on October 11, 1950. An unsuccessful lawsuit by RCA delayed the first commercial network broadcast in color until June 25, 1951, when a musical variety special titled simply Premiere was shown over a network of five East Coast CBS affiliates.[30] Viewing was again restricted: the program could not be seen on black-and-white sets, and Variety estimated that only thirty prototype color receivers were available in the New York area.[31] Regular color broadcasts began that same week with the daytime series The World Is Yours and Modern Homemakers.

While the CBS color broadcasting schedule gradually expanded to twelve hours per week (but never into prime time),[32] and the color network expanded to eleven affiliates as far west as Chicago,[33] its commercial success was doomed by the lack of color receivers necessary to watch the programs, the refusal of television manufacturers to create adapter mechanisms for their existing black-and-white sets,[34] and the unwillingness of advertisers to sponsor broadcasts seen by almost no one. CBS had bought a television manufacturer in April,[35] and in September 1951, production began on the only CBS-Columbia color television model, with the first color sets reaching retail stores on September 28.[36][37] But it was too little, too late. Only 200 sets had been shipped, and only 100 sold, when CBS discontinued its color television system on October 20, 1951, ostensibly by request of the National Production Authority for the duration of the Korean War, and bought back all the CBS color sets it could to prevent lawsuits by disappointed customers.[38][39] RCA chairman David Sarnoff later charged that the NPA's order had come "out of a situation artificially created by one company to solve its own perplexing problems" because CBS had been unsuccessful in its color venture.[40]

Compatible color

While the FCC was holding its JTAC meetings, development was taking place on a number of systems allowing true simultaneous color broadcasts, "dot-sequential color systems". Unlike the hybrid systems, dot-sequential televisions used a signal very similar to existing black-and-white broadcasts, with the intensity of every dot on the screen being sent in succession.

In 1938 Georges Valensi demonstrated an encoding scheme that would allow color broadcasts to be encoded so they could be picked up on existing black-and-white sets as well. In his system the output of the three camera tubes were re-combined to produce a single "luminance" value that was very similar to a monochrome signal and could be broadcast on the existing VHF frequencies. The color information was encoded in a separate "chrominance" signal, consisting of two separate signals, the original blue signal minus the luminance (B'–Y'), and red-luma (R'–Y'). These signals could then be broadcast separately on a different frequency; a monochrome set would tune in only the luminance signal on the VHF band, while color televisions would tune in both the luminance and chrominance on two different frequencies, and apply the reverse transforms to retrieve the original RGB signal. The downside to this approach is that it required a major boost in bandwidth use, something the FCC was interested in avoiding.

RCA used Valensi's concept as the basis of all of its developments, believing it to be the only proper solution to the broadcast problem. However, RCA's early sets using mirrors and other projection systems all suffered from image and color quality problems, and were easily bested by CBS's hybrid system. But solutions to these problems were in the pipeline, and RCA in particular was investing massive sums (later estimated at $100 million) to develop a usable dot-sequential tube. RCA was beaten to the punch by the Geer tube, which used three B&W tubes aimed at different faces of colored pyramids to produce a color image. All-electronic systems included the Chromatron, Penetron and "Apple" tube that were being developed by various companies. While investigating all of these, RCA's teams quickly started focusing on the shadow mask system.

In July 1938 the shadow mask color television was patented by Werner Flechsig (1900–1970) in Germany, and was demonstrated at the International radio exhibition Berlin in 1939. Most CRT color televisions used today are based on this technology. His solution to the problem of focusing the electron guns on the tiny colored dots was one of brute-force; a metal sheet with holes punched in it allowed the beams to reach the screen only when they were properly aligned over the dots. Three separate guns were aimed at the holes from slightly different angles, and when their beams passed through the holes the angles caused them to separate again and hit the individual spots a short distance away on the back of the screen. The downside to this approach was that the mask cut off the vast majority of the beam energy, allowing it to hit the screen only 15% of the time, requiring a massive increase in beam power to produce acceptable image brightness.

In spite of these problems in both the broadcast and display systems, RCA pressed ahead with development and was ready for a second assault on the standards by 1950.

Second NTSC

The possibility of a compatible color broadcast system was so compelling that the NTSC decided to re-form, and held a second series of meetings starting in January 1950. Having only recently selected the CBS system, the FCC heavily opposed the NTSC's efforts. One of the FCC Commissioners, R. F. Jones, went so far as to assert that the engineers testifying in favor of a compatible system were "in a conspiracy against the public interest".

Unlike the FCC approach where a standard was simply selected from the existing candidates, the NTSC would produce a board that was considerably more pro-active in development.

Starting before CBS color even got on the air, the U.S. television industry, represented by the National Television System Committee, worked in 1950–1953 to develop a color system that was compatible with existing black-and-white sets and would pass FCC quality standards, with RCA developing the hardware elements. RCA first made publicly announced field tests of the dot sequential color system over its New York station WNBT in July 1951.[41] When CBS testified before Congress in March 1953 that it had no further plans for its own color system,[42] the National Production Authority dropped its ban on the manufacture of color television receivers,[43] and the path was open for the NTSC to submit its petition for FCC approval in July 1953, which was granted on December 17.[44] The first publicly announced network demonstration of a program using the NTSC "compatible color" system was an episode of NBC's Kukla, Fran and Ollie on August 30, 1953, although it was viewable in color only at the network's headquarters.[45] The first network broadcast to go out over the air in NTSC color was a performance of the opera Carmen on October 31, 1953.[46][47]


North America


Color television in Canada was launched simultaneously in English and French at 12:01 am on July 1, 1966, [48] at the beginning of Canada's 100th year as a nation. Broadcasts were not widely available until September 1966, and fewer than 1% of Canadian households had a color television set at the time. [49] Color broadcasts from the United States had been available since the mid-1950s. Full-time color transmissions started in 1974.

United States

NBC made the first coast-to-coast color broadcast when it telecast the Tournament of Roses Parade on January 1, 1954, with public demonstrations given across the United States on prototype color receivers by manufacturers RCA, General Electric, Philco, Raytheon, Hallicrafters, Hoffman, Pacific Mercury and others.[50] A color model from Westinghouse H840CK15 ($1,295, or $11.4 thousand in today's[51] dollars) became available in the New York area on February 28, 1954 and is generally agreed to be the first production receiver using NTSC color offered to the public;[52] a less expensive color model from RCA (RCA-CT100) reached dealers in April 1954.[53] Television's first prime time network color series was The Marriage, a situation comedy broadcast live by NBC in the summer of 1954.[54] NBC's anthology series Ford Theatre became the first network color filmed series that October.[55]

Early color telecasts could be preserved only on the black-and-white kinescope process introduced in 1947. It was not until September 1956 that NBC began using color film to time-delay and preserve some of its live color telecasts.[56] Ampex introduced a color videotape recorder in 1958, which NBC used to tape An Evening With Fred Astaire, the oldest surviving network color videotape.

Several syndicated shows had episodes filmed in color during the 1950s, including The Cisco Kid, The Lone Ranger, My Friend Flicka, and Adventures of Superman. The first two were carried by some stations equipped for color telecasts well before NBC began its regular weekly color dramas in 1959, beginning with the Western series Bonanza.

NBC was at the forefront of color programming because its parent company RCA manufactured the most successful line of color sets in the 1950s, and by 1959 RCA was the only remaining major manufacturer of color sets.[57] CBS and ABC, which were not affiliated with set manufacturers and were not eager to promote their competitor's product, dragged their feet into color.[58][59] CBS broadcast color specials and sometimes aired its big weekly variety shows in color, but it offered no regularly scheduled color programming until the fall of 1965. At least one CBS show, The Lucy Show, was filmed in color beginning in 1963 but continued to be telecast in black and white through the end of the 1964–65 season. ABC delayed its first color series until 1962.[60] The DuMont network, although it did have a television-manufacturing parent company, was in financial decline by 1954 and was dissolved two years later.[61]

The relatively small amount of network color programming, combined with the high cost of color television sets, meant that as late as 1964 only 3.1 percent of television households in the U.S. had a color set. NBC provided the catalyst for rapid color expansion by announcing that its prime time schedule for fall 1965 would be almost entirely in color.[62] ABC and CBS joined the bandwagon and over half of their combined prime-time programming also was in color that season. All three broadcast networks were airing full color prime time schedules by the 1966–67 broadcast season, and ABC aired its last new black-and-white daytime programming in December 1967.[63] Public broadcasting networks like NET, however, did not use color for a majority of their programming until 1968. The number of color television sets sold in the U.S. did not exceed black-and-white sales until 1972, which was also the first year that more than fifty percent of television households in the U.S. had a color set.[64] This was also the year that "in color" notices before color television programs ended, due to the rise in color television set sales, and color programming having become the norm.

In a display of foresight, Disney had filmed many of its earlier shows in color so they were able to be repeated on NBC, and since most of Disney's feature-length films were also made in color, they could now also be telecast in that format. To emphasize the new feature, the series was re-dubbed, "Walt Disney's Wonderful World of Color", which premiered in September of 1961, and retained that moniker until 1969.[65]

Color broadcasting in Hawaii started in September 1965, and in Alaska a year later. One of the last television stations in North America to convert to color was on October 16, 1986, when WQEX in Pittsburgh started broadcasting in color after its black-and-white transmitter, which dated from the 1950s, broke down in February 1985 and the parts required to fix it were no longer available. The then-owner of WQEX, PBS member station WQED, then diverted some of its pledge money into getting a color transmitter for WQEX.


Cuba in 1958 became the second country in the world to introduce color television broadcasting, with Havana's Channel 12 using standards established by the NTSC Committee of United States Federal Communications Commission in 1940, and American technology patented by the American electronics company RCA, or Radio Corporation of America. But the color transmissions ended when broadcasting stations were seized in the Cuban Revolution in 1959, and did not return until 1975, using equipment acquired from Japan's NEC Corporation, and SECAM equipment from the Soviet Union, adapted for the American NTSC standard.[66]


In Mexico, Guillermo González Camarena invented an early color television transmission system. He received patents for color television systems in 1942 (U.S. Patent 2,296,019), 1960 and 1962. The 1942 patent (filed in Mexico on August 19, 1940)[67] was for a synchronized color filter wheel adapter for monochrome television, similar to the field sequential color receiver demonstrated by Baird in England in July 1939[68] and by CBS in the United States in August 1940.

On August 31, 1946 González Camarena sent his first color transmission from his lab in the offices of The Mexican League of Radio Experiments at Lucerna St. No. 1, in Mexico City. The video signal was transmitted at a frequency of 115 MHz. and the audio in the 40 metre band. He obtained authorization to make the first publicly announced color broadcast in Mexico, on February 8, 1963, of the program Paraíso Infantil on Mexico City's XHGC-TV, using the NTSC system which had by now been adopted as the standard for color programming.

A field-sequential color television system similar to his Tricolor system was used in NASA's Voyager mission in 1979, to take pictures and video of Jupiter.[69]


European color television was developed somewhat later and was hindered by a continuing division (and nationalistic bias) on technical standards. Having decided to adopt a higher-definition 625-line system for monochrome transmissions, with a lower frame rate but with a higher overall bandwidth, Europeans could not directly adopt the U.S. color standard. This was widely perceived as inadequate anyway because of its hue error problems, which became particularly acute with the introduction of videotape recorders in the late 1950s. There was also less urgency, since there were fewer commercial motivations, European television broadcasters being predominantly state-owned at the time.

As a consequence, although work on various color encoding systems started already in the 1950s, with the first SECAM patent being registered in 1956, many years had passed when the first broadcasts actually started in 1967. Unsatisfied with the performance of NTSC and of initial SECAM implementations, the Germans unveiled PAL (phase alternating line) in 1963, technically similar to NTSC but borrowing some ideas from SECAM. The French continued with SECAM, notably involving Russians in the development.

The first full-specification PAL receivers ("PAL-D") relied on a precision ultrasonic glass delay line, which in the early days was estimated would make up about a third of the cost of the receiver. PAL stood for Phase Alternated Line. It was basically a 625-line version of NTSC, with phase inversion of alternate numbered scan lines. Therefore, for example, a HUE or TINT (phase) error on line 22 would be offset by an opposite HUE or TINT error on line 23. The two phase errors would cancel each other in the optical presentation as interpreted by the human eye. The TINT control required by NTSC was therefore obviated. Other color encoding systems had already been proposed which would overcome the tint problems of NTSC using such a delay line, but PAL was unique in that an economy receiver (known as "PAL-S" for "simple PAL") could also be built without using a delay line, with a performance no worse than, and in most cases better than, an equivalent NTSC model.

SECAM did not require such precision for its delay line, and could use much cheaper magnetostrictive metal types. Ironically, by the time PAL broadcasts commenced in 1967, advances in glassmaking techniques had dropped the cost of precision PAL delay lines so much that hardly any simple-PAL receivers were built commercially, and virtually all SECAM receivers used the same type of delay line as PAL receivers. By the end of the 20th century, glass delay lines had been completely replaced by all-electronic equivalents.

The first regular color broadcasts in Europe were by the United Kingdom's BBC2 beginning on July 1, 1967 (PAL). West Germany's first broadcast occurred in August (PAL), followed by the Netherlands in September (PAL), and by France in October (SECAM). Norway, Sweden, Finland, Austria, East Germany, Czechoslovakia and Hungary all started regular color broadcasts before the end of 1969. Ireland's national TV station RTÉ began using color in 1968 for recorded programmes; the first Outside Broadcast made in color for RTÉ Television was when Ireland hosted the Eurovision Song Contest in Dublin in 1971.[70] The PAL system spread through most of Western Europe and on into the territories of the old British, Portuguese, Belgian, Dutch, Austria, Ottoman and Chinese Empires.

More European countries introduced color television using the PAL system in the 1970s and early 1980s; examples include Greenland (1970), Belgium (1971), Yugoslavia/Serbia (1971), Spain (1972), Iceland (1973), Portugal (1976, but not fully implemented until 1980), Albania (1981) and Turkey (1981). In Italy there were debates to adopt a national color television system, the ISA, developed by Indesit, but that idea was scrapped. As a result, Italy was one of the last European countries to officially adopt the PAL system in 1977, after long technical experimentation.[71]

France, Luxembourg and most of the Eastern Bloc along with their overseas territories opted for SECAM. SECAM was a popular choice in countries with a lot of hilly terrain, and technologically backward countries with a very large installed base of monochrome equipment, since the greater ruggedness of the SECAM signal could cope much better with poorly maintained equipment. However for many countries the decision was more down to politics than technical merit.

A drawback of SECAM for production is that, unlike PAL or NTSC, certain post-production operations of encoded SECAM signals are not really possible without a significant drop in quality. As an example, a simple fade to black is trivial in NTSC and PAL: you just reduce the signal level until it is zero. However, in SECAM the color difference signals, which are frequency modulated, need first to be decoded to e.g. RGB, then the fade-to-black is applied, and finally the resulting signal is re-encoded into SECAM. Because of this, much SECAM video editing was actually done using PAL equipment, then the resultant signal was converted to SECAM. Another drawback of SECAM is that comb filtering, allowing better color separation, is not possible in TV receivers. This was not, however, much of a drawback in the early days of SECAM as such filters did not become readily available in high-end TV sets before the 1990s.

The first regular color broadcasts in SECAM were started on October 1, 1967, on France's Second Channel (ORTF 2e chaîne). In France and the UK color broadcasts were made on UHF frequencies, the VHF band being used for legacy black and white, 405 lines in UK or 819 lines in France, till the beginning of the 1980s. Countries elsewhere that were already broadcasting 625-line monochrome on VHF and UHF, simply transmitted color programs on the same channels.

Some British television programmes, particularly those made by or for ITC Entertainment, were shot on color film before the introduction of color television to the UK, for the purpose of sales to U.S. networks. The first British show to be made in color was the drama series The Adventures of Sir Lancelot (1956–57), which was initially made in black and white but later shot in color for sale to the NBC network in the United States. Other British color television programmes include Stingray (1964–1965), which was the first British TV show to be filmed entirely in color, Thunderbirds (1965–1966) and Captain Scarlet and the Mysterons (1967–1968). However, most UK series predominantly made using videotape, such as Doctor Who (1963–89; 2005–present) did not begin color production until later, with the first color Doctor Who episodes not airing until 1970.

Asia and the Pacific

In Japan, NHK and NTV introduced color television, using a variation of the NTSC system (called NTSC-J) on September 10, 1960, making it the first country in Asia to introduce color television. The Philippines (1966) and the Republic of China (Taiwan) (1969) also adopted the NTSC system. Other countries in the region instead used the PAL system, starting with Australia (1967, but not fully implemented until 1975), and then Thailand (1969; this country converted from a 525-line screen to 625 lines), Hong Kong (1970), the People's Republic of China (1971), New Zealand (1973), North Korea (1974), Singapore (1974), Pakistan (1976, but not fully implemented until 1982), Vietnam (1978), Malaysia (1978, but not fully implemented until 1980), Indonesia (1979), India (1979, but not fully implemented until 1982) and Bangladesh (1980). South Korea did not introduce color television (using NTSC) until 1980 (full-time color transmissions began in 1981), although it was already manufacturing color television sets for export. Cambodia was the last country in Asia to introduce color television, officially introduced in 1981 using the PAL system, with full-time color transmissions since 1985.

Middle East

Nearly all of the countries in the Middle East use PAL. The first country in the Middle East to introduce color television was Iraq in 1967. Saudi Arabia, the United Arab Emirates, Kuwait, Bahrain, and Qatar followed in the mid-1970s, but Israel, Lebanon and Cyprus continued to broadcast in black and white until the early 1980s. Israeli television even erased the color signals using a device called the mekhikon.


The first color television service in Africa was introduced on the Tanzanian island of Zanzibar, in 1973, using PAL. At the time, South Africa did not have a television service at all, owing to opposition from the apartheid regime, but in 1976, one was finally launched. Nigeria adopted PAL for color transmissions in 1974 in the then Benue Plateau state in the north central region of the country, but countries such as Ghana and Zimbabwe continued with black and white until 1984. The Sierra Leone Broadcasting Service (SLBS) started television broadcasting in 1963 as a cooperation between the SLBS and commercial interests. Coverage was extended to all districts in 1978 when the service was also upgraded to color.

South America

In contrast to most other countries in the Americas, which had adopted NTSC, Brazil began broadcasting in color in PAL-M. Its first color transmission was on February 19, 1972. However Ecuador was the first South American country to receive color TV, using NTSC. Its first color transmission was on November 5, 1974. Some countries in South America, including Argentina, Bolivia, Chile, Paraguay, Peru, and Uruguay, continued to broadcast in black and white until the late 1970s.

Color standards

There are three main analog broadcast television systems in use around the world, PAL (Phase Alternating Line), NTSC (National Television System Committee) and SECAM (Séquentiel Couleur à Mémoire—Sequential Color with Memory).

The system used in North America is NTSC. Western Europe, Australia, Africa and Eastern South America use PAL. Eastern Europe used SECAM, but switched to PAL after the change of the political regimes there. France still uses SECAM. Generally, a device (such as a television) can only read or display video encoded to a standard which the device is designed to support; otherwise, the source must be converted (such as when European programs are broadcast in North America or vice versa). Because a tint control is unnecessary in PAL, NTSC has jokingly been said to stand for Never The Same Color or Never Twice the Same Color.[72]

This table illustrates the differences:

Lines/Fields 525/60 625/50 625/50 625/50 525/60 625/50 625/50
Horizontal Frequency 15.734 kHz 15.625 kHz 15.625 kHz 15.625 kHz 15.750 kHz 15.625 kHz 15.625 kHz
Vertical Frequency 60 Hz 50 Hz 50 Hz 50 Hz 60 Hz 50 Hz 50 Hz
Color Subcarrier Frequency 3.579545 MHz 4.43361875 MHz 4.43361875 MHz 3.582056 MHz 3.575611 MHz
Video Bandwidth 4.2 MHz 5.0 MHz 5.5 MHz 4.2 MHz 4.2 MHz 5.0 MHz 6.0 MHz
Sound Carrier 4.5 MHz 5.5 MHz 5.9996 MHz 4.5 MHz 4.5 MHz 5.5 MHz 6.5 MHz

Digital television broadcasting standards, such as ATSC, DVB-T, DVB-T2, and ISDB, have superseded these analog transmission standards in many countries.

See also

Television portal


External links

  • , April 1944 one of the earliest magazine articles detailing the new technology of color television
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.