#jsDisabledContent { display:none; } My Account | Register | Help

# Idler-wheel

Article Id: WHEBN0007937705
Reproduction Date:

 Title: Idler-wheel Author: World Heritage Encyclopedia Language: English Subject: Collection: Mechanical Engineering Publisher: World Heritage Encyclopedia Publication Date:

### Idler-wheel

An idler-wheel drive is a system used to transmit the rotation of the main shaft of a motor to another rotating device, for example the platter of a record-reproducing turntable or the crankshaft-to-camshaft gear train of an automobile.

## Contents

• Friction drive 1
• Idler gear 2
• Gear ratio 2.1
• Applications 2.2
• References 3

## Friction drive

An idler-wheel may be used as part of a friction drive mechanism, as in a phonograph, or as a belt tensioner in a belt drive system.

## Idler gear

Gears in a machine. The middle, medium-sized gear is an idler gear.

An idler gear is a gear wheel that is inserted between two or more other gear wheels. The purpose of an idler gear can be two-fold. Firstly, the idler gear will change the direction of rotation of the output shaft. Secondly, an idler gear can assist to reduce the size of the input/output gears whilst maintaining the spacing of the shafts.

### Gear ratio

An idler gear does not affect the gear ratio between the input and output shafts. Note that in a sequence of gears chained together, the ratio depends only on the number of teeth on the first and last gear. The intermediate gears, regardless of their size, do not alter the overall gear ratio of the chain. But, of course, the addition of each intermediate gear reverses the direction of rotation of the final gear.

In non-geared friction drive system, the size of all three wheels do matter in calculating final speed or distance. This is due to all systems being in constant contact due to a gain ratio. Geared systems have a direct ratio of teeth per size, but all three wheels in constant friction has influence on one another. You can calculate the distance the final output gear will travel by using this formula: the diameter of the drive wheel or input shaft x the size of the output shaft / the size of the idler wheel.[1] For instance, if you have a capstan drive shaft that is 8mm in diameter, and it is turning an idler wheel that is 40 mm in diameter that is then turning a wheel that is 250mm:

8mm input shaft x 250mm output shaft / 40mm idler wheel = 50 mm.

This means that one rotation of the input shaft would make the output shaft travel 50mm in rotational distance. Rotational distance can also be calculated in speed given the capstan is a constant speed. However, the size of all three friction wheels will effect final output speed (RPM) or distance. For the size of the idler wheel: the bigger the idler wheel, the slower final output speed will be and the smaller the idler wheel, the faster final output speed or distance will be.

### Applications

Reversing

An intermediate gear which does not drive a shaft to perform any work is called an idler gear. Sometimes, a single idler gear is used to reverse the direction, in which case it may be referred to as a reverse idler. For instance, the typical automobile manual transmission engages reverse gear by means of inserting a reverse idler between two gears. Since a driven gear (gear "A") rotating clockwise will drive a second gear ("B") counterclockwise, adding a third gear to the string means that gear "C" will be spinning the same direction as "A". A typical transmission is designed with "A" and "B" gears, so when the engine spins, the outputs shaft spins the opposite direction, which drives the vehicle forward. A reverse idler gear setup is actually typically an "A" and a "C" gear, which are not in contact with each other until a "B" gear is moved between them. Since the transmission is designed to move the car forwards when the output is spinning in the opposite direction from the input shaft, when you add the "B" idler gear, it forces the "C" gear to spin in the same direction as the "A" gear, and thus the input and output shafts are spinning in the same direction, which drives the car in reverse.

Another scenario is a series of rollers, such as used for pressing paper. Each roller has to be powered, but adding a motor to each one is wasteful. One could simply add a gear onto the end of the shaft of each roller, but that means that each roller would be spinning the same direction as the one before. By simply adding a small idler gear between each larger gear, you end up with a series of rollers, all being powered in the same direction.

Transmission over distance

Idler gears can also transmit rotation among distant shafts in situations where it would be impractical to simply make the distant gears larger to bring them together. Not only do larger gears occupy more space, but the mass and rotational inertia (moment of inertia) of a gear is quadratic in proportion to its radius. Instead of idler gears, of course, a toothed belt or a roller chain can be used to transmit torque over distance. For short distances, a train of idlers may be used; whether an odd or even number is used determines whether the final output gear rotates the same direction as the input gear or not. For longer distances, a roller chain or belt is quieter and creates less friction, although gears are typically stronger, depending and the strength of the roller chain. A case where numerous idler gears might be used is as described above, where there are a number of output gears that need to be driven simultaneously.

Caterpillar track idler wheels

Note that there are some non-powered tracked transports (i.e. trailers that roll on tracks rather than wheels), which have two idler wheels rather than a drive sprocket. There are also certain pieces of equipment, such as the Caterpillar D9 bulldozer, Tucker Sno-cat and Mattracks rubber track conversion kits, which configure their tracks in the shape of a triangle, or pyramid (when viewed from the side), with the drive sprocket at the tip of the pyramid. In this configuration, there are two idler/roadwheels and one drive sprocket (as well as a number of small, load-bearing roadwheels). In very rare cases, the vehicle lacks an idler wheel at all; in Northern regions, one way people got better traction in deep snow was to take a simple three-axle truck, and install a simple continuous track around the rear wheels, thus forming a basic half-track system which featured two drive wheels, and no idler or road wheels. One almost never sees this on true tracked vehicles, however, as the second drive wheel is redundant.

## References

1. ^ "Sheldon Brown's Bicycle Glossary G". sheldonbrown.com.
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.

Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.