World Library  
Flag as Inappropriate
Email this Article

Jump rings

Article Id: WHEBN0021464260
Reproduction Date:

Title: Jump rings  
Author: World Heritage Encyclopedia
Language: English
Subject:
Collection:
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Jump rings

Jump rings are (usually metal) rings used to make chains, jewelry and chainmaille. They are made by wrapping wire round a mandrel to make a coil and then cutting the coil with wire cutters to make individual rings. The rings can be assembled one by one into chains, earrings, objects such as bowls or ornaments, and chain mail clothing.

The making of items from jump rings is called chain maille ("maille" is French for "mesh").

Jump rings can be described by the following qualities :

Gauge : The thickness of the wire the ring is made from. Usually measured according to American Wire Gauge standards or in millimetres, but SWG (Standard Wire Gauge) may be used.
Inner diameter: Approximately the same as the outer diameter of the mandrel used to create the rings, but the exact inner diameter will depend on the degree to which the wire springs as it comes off the mandrel.
Kerf width : The gap between the ends of the jump ring created by the cutting process
Cut type : Saw cut or pinched. The former produces a clean uniform cut whereas the latter is pinched and looks less attractive.
Outer diameter: The outer diameter of the ring, this is the same as (twice the gauge + the inner diameter).
Colour For example, anodised aluminium rings come in many colours.
Material: The common materials are gold (or plated gold), silver (or plated silver), aluminium, brass, stainless steel, copper, niobium, and titanium.
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.