World Library  
Flag as Inappropriate
Email this Article

Mp1

Article Id: WHEBN0008497960
Reproduction Date:

Title: Mp1  
Author: World Heritage Encyclopedia
Language: English
Subject: Advanced Audio Coding, MPEG-4 Part 3, Foobar2000, List of codecs, Libavcodec
Collection:
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Mp1

Not to be confused with MPEG-1.
"MP1" redirects here. For the video game sometimes abbreviated as MP1, see Mario Party (video game).
MPEG-1 Audio Layer 1
Filename extension .mp1
Internet media type audio/mpeg,[1] audio/MPA[2]
Type of format Audio compression format, audio file format
Standard(s) ISO/IEC 11172-3,[3]
ISO/IEC 13818-3[4]

MPEG-1 Audio Layer I, commonly abbreviated to MP1, is one of three audio formats included in the MPEG-1 standard. While supported by most media players, the codec is considered largely outdated, and replaced by MP2 or MP3.

For files only containing MP1 audio, the file extension .mp1 is used.

MPEG-1 Layer I is defined in ISO/IEC 11172-3, which first version was published in 1993.

  • Sampling rates: 32, 44.1 and 48 kHz
  • Bitrates: 32, 64, 96, 128, 160, 192, 224, 256, 288, 320, 352, 384, 416 and 448 kbit/s[5]

An extension has been provided in MPEG-2 Layer I and is defined in ISO/IEC 13818-3, which first version was published in 1995.

  • Additional sampling rates: 16, 22.05 and 24 kHz
  • Additional bitrates: 48, 56, 80, 112, 144 and 176 kbit/s[5]

MP1 uses a comparatively simple sub-band coding, using 32 sub-bands.[6]

MPEG-1 layer I was also used by the Digital Compact Cassette format, in the form of the PASC audio compression codec. Because of the need of a steady stream of frames per second on a tape-based medium, PASC uses the rarely used (and under-documented) padding bit in the MPEG header to indicate that a frame was padded with 32 extra 0-bits (four 0-bytes) to change a short 416-byte frame into 420 bytes. The varying frame size only occurs when a 44.1 kHz 16 bits stereo audio signal is encoded at 384 kilobits per second, because the bitrate of the uncompressed signal is not an exact multiple of the bitrate of the compressed bit stream.

References

External links

  • Sub-Band Coding: A description of sub-band coding, including an overview of the MP1 codec.
  • MPEG-1 Audio Layers I and II] on Scratchpad Wiki Labs, an external wiki]
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.