World Library  
Flag as Inappropriate
Email this Article


Article Id: WHEBN0000317227
Reproduction Date:

Title: Micelle  
Author: World Heritage Encyclopedia
Language: English
Subject: Surfactant, Neurokinin A, Liquid crystal, Casein, Micellar liquid chromatography
Collection: Colloidal Chemistry, Supramolecular Chemistry
Publisher: World Heritage Encyclopedia


Cross-section view of the structures that can be formed by phospholipids in aqueous solutions (Note that, unlike this illustration, micelles are usually formed by single-chain lipids, since it is tough to fit two chains into this shape)
Scheme of a micelle formed by phospholipids in an aqueous solution
IUPAC definition

Micelle: Particle of colloidal dimensions that exists in equilibrium with the
molecules or ions in solution from which it is formed.

Note: Based on definition in ref.[1]


Micelle (polymers): Organized auto-assembly formed in a liquid and
composed of amphiphilic macromolecules, in general amphiphilic di-
or tri-block copolymers made of solvophilic and solvophobic blocks.

Note 1: An amphiphilic behavior can be observed for water and an organic
solvent or between two organic solvents.

Note 2: Polymeric micelles have a much lower critical micellar concentration
(CMC) than soap or surfactant micelles, but are nevertheless at equilibrium
with isolated macromolecules called unimers. Therefore, micelle formation
and stability are concentration-dependent.[3]

A micelle () or micella () (plural micelles or micellae, respectively) is an aggregate of surfactant molecules dispersed in a liquid colloid. A typical micelle in aqueous solution forms an aggregate with the hydrophilic "head" regions in contact with surrounding solvent, sequestering the hydrophobic single-tail regions in the micelle centre. This phase is caused by the packing behavior of single-tail lipids in a bilayer. The difficulty filling all the volume of the interior of a bilayer, while accommodating the area per head group forced on the molecule by the hydration of the lipid head group, leads to the formation of the micelle. This type of micelle is known as a normal-phase micelle (oil-in-water micelle). Inverse micelles have the head groups at the centre with the tails extending out (water-in-oil micelle). Micelles are approximately spherical in shape. Other phases, including shapes such as ellipsoids, cylinders, and bilayers, are also possible. The shape and size of a micelle are a function of the molecular geometry of its surfactant molecules and solution conditions such as surfactant concentration, temperature, pH, and ionic strength. The process of forming micelles is known as micellisation and forms part of the phase behaviour of many lipids according to their polymorphism.


  • History 1
  • Solvation 2
  • Energy of formation 3
  • Micelle Packing Parameter 4
  • Block copolymer Micelles 5
    • Dynamic Micelles 5.1
    • Kinetically Frozen Micelles 5.2
  • Inverse/reverse micelles 6
  • Uses 7
  • See also 8
  • Notes 9
  • References 10


The ability of a soapy solution to act as a detergent has been recognized for centuries. However, it is only at the beginning of the twentieth century that the constitution of such solutions was scientifically studied. Pioneering work in this area was carried out by James William McBain at the University of Bristol. As early as 1913, he postulated the existence of “colloidal ions” to explain the good electrolytic conductivity of sodium palmitate solutions.[4] These highly mobile, spontaneously formed clusters came to be called micelles, a term borrowed from biology and popularized by G.S. Hartley in his classic book Paraffin Chain Salts: A Study in Micelle Formation.[5]


Individual surfactant molecules that are in the system but are not part of a micelle are called "monomers". Lipid micelles represent a molecular assembly, in which the individual components are thermodynamically in equilibrium with monomers of the same species in the surrounding medium. In water, the hydrophilic "heads" of surfactant molecules are always in contact with the solvent, regardless of whether the surfactants exist as monomers or as part of a micelle. However, the lipophilic "tails" of surfactant molecules have less contact with water when they are part of a micelle—this being the basis for the energetic drive for micelle formation. In a micelle, the hydrophobic tails of several surfactant molecules assemble into an oil-like core, the most stable form of which having no contact with water. By contrast, surfactant monomers are surrounded by water molecules that create a "cage" of molecules connected by hydrogen bonds. This water cage is similar to a clathrate and has an ice-like crystal structure and can be characterized according to the hydrophobic effect. The extent of lipid solubility is determined by the unfavorable entropy contribution due to the ordering of the water structure according to the hydrophobic effect.

Micelles composed of ionic surfactants have an electrostatic attraction to the ions that surround them in solution, the latter known as counterions. Although the closest counterions partially mask a charged micelle (by up to 90%), the effects of micelle charge affect the structure of the surrounding solvent at appreciable distances from the micelle. Ionic micelles influence many properties of the mixture, including its electrical conductivity. Adding salts to a colloid containing micelles can decrease the strength of electrostatic interactions and lead to the formation of larger ionic micelles.[6] This is more accurately seen from the point of view of an effective charge in hydration of the system.

Energy of formation

Micelles form only when the concentration of surfactant is greater than the critical micelle concentration (CMC), and the temperature of the system is greater than the critical micelle temperature, or Krafft temperature. The formation of micelles can be understood using thermodynamics: Micelles can form spontaneously because of a balance between entropy and enthalpy. In water, the hydrophobic effect is the driving force for micelle formation, despite the fact that assembling surfactant molecules together reduces their entropy. At very low concentrations of the lipid, only monomers are present in true solution. As the concentration of the lipid is increased, a point is reached at which the unfavorable entropy considerations, derived from the hydrophobic end of the molecule, become dominant. At this point, the lipid hydrocarbon chains of a portion of the lipids must be sequestered away from the water. Therefore, the lipid starts to form micelles. In broad terms, above the CMC, the entropic penalty of assembling the surfactant molecules is less than the entropic penalty of caging the surfactant monomers with water molecules. Also important are enthalpic considerations, such as the electrostatic interactions that occur between the charged parts of surfactants.

Micelle Packing Parameter

The micelle packing parameter equation is utilized to help "predict molecular self-assembly in surfactant solutions":[7]


where v_o is the surfactant tail volume, l_o is the tail length, and a_e is the equilibrium area per molecule at the aggregate surface.

Block copolymer Micelles

The concept of micelles was introduced to describe the core-corona aggregates of small surfactant molecules, however it has also extended to describe aggregates of amphiphilic block copolymers in selective solvents. It is important to know the difference between these two systems. The major difference between these two types of aggregates is in the size of their building blocks. Surfactant molecules have a molecular weight which is generally of a few hundreds of grams per mole while block copolymers are generally one or two orders of magnitude larger. Moreover, thanks to the larger hydrophilic and hydrophobic parts, block copolymers can have a much more pronounced amphiphilic nature when compared to surfactant molecules.

Because of these differences in the building blocks, some block copolymer micelles behave like surfactant ones, while others don't. It is necessary therefore to make a distinction between the two situations. The former ones will belong to the dynamic micelles while the latter will be called kinetically frozen micelles.

Dynamic Micelles

Certain amphiphilic block copolymer micelles display a similar behavior as surfactant micelles. These are generally called dynamic micelles and are characterized by the same relaxation processes assigned to surfactant exchange and micelle scission/recombination. Although the relaxation processes are the same between the two types of micelles, the kinetics of unimer exchange are very different. While in surfactant systems the unimers leave and join the micelles through a diffusion-controlled process, for copolymers the entry rate constant is slower than a diffusion controlled process. The rate of this process was found to be a decreasing power-law of the degree of polymerization of the hydrophobic block to the power 2/3. This difference is due to the coiling of the hydrophobic block of a copolymer exiting the core of a micelle.[8]

Block copolymers which form dynamic micelles are some of the tri-block Poloxamers under the right conditions.

Kinetically Frozen Micelles

When block copolymer micelles don't display the characteristic relaxation processes of surfactant micelles, these are called kinetically frozen micelles. These can be achieved in two ways: when the unimers forming the micelles are not soluble in the solvent of the micelle solution, or if the core forming blocks are glassy at the temperature in which the micelles are found. Kinetically frozen micelles are formed when either of these conditions is met. A special example in which both of these conditions are valid is that of polystyrene-b-poly(ethylene oxide). This block copolymer is characterized by the high hydrophobicity of the core forming block, PS, which causes the unimers to be insoluble in water. Moreover, PS has a high glass transition temperature which is, depending on the molecular weight, higher than room temperature. Thanks to these two characteristics, a water solution of PS-PEO micelles of sufficiently high molecular weight can be considered kinetically frozen. This means that none of the relaxation processes, which would drive the micelle solution towards thermodynamic equilibrium, are possible.[9] Pioneering work on these micelles was done by Adi Eisenberg.[10] It was also shown how the lack of relaxation processes allowed great freedom in the possible morphologies formed.[11][12][12] Moreover, the stability against dilution and vast range of morphologies of kinetically frozen micelles make them particularly interesting, for example, for the development of long circulating drug delivery nanoparticles.[13]

Inverse/reverse micelles

In a non-polar solvent, it is the exposure of the hydrophilic head groups to the surrounding solvent that is energetically unfavourable, giving rise to a water-in-oil system. In this case, the hydrophilic groups are sequestered in the micelle core and the hydrophobic groups extend away from the centre. These inverse micelles are proportionally less likely to form on increasing headgroup charge, since hydrophilic sequestration would create highly unfavorable electrostatic interactions.


When surfactants are present above the CMC (Critical micelle concentration), they can act as emulsifiers that will allow a compound that is normally insoluble (in the solvent being used) to dissolve. This occurs because the insoluble species can be incorporated into the micelle core, which is itself solubilized in the bulk solvent by virtue of the head groups' favorable interactions with solvent species. The most common example of this phenomenon is detergents, which clean poorly soluble lipophilic material (such as oils and waxes) that cannot be removed by water alone. Detergents clean also by lowering the surface tension of water, making it easier to remove material from a surface. The emulsifying property of surfactants is also the basis for emulsion polymerization.

Micelle formation is essential for the absorption of fat-soluble vitamins and complicated lipids within the human body. Bile salts formed in the liver and secreted by the gall bladder allow micelles of fatty acids to form. This allows the absorption of complicated lipids (e.g., lecithin) and lipid-soluble vitamins (A, D, E, and K) within the micelle by the small intestine.

Micelles can also be used for targeted drug delivery as gold nanoparticles.[14]

See also


  1. ^ Alan D. MacNaught, Andrew R. Wilkinson (ed.). Compendium of Chemical Terminology: IUPAC Recommendations (2nd ed.). Oxford: Blackwell Science.  
  2. ^ "Terminology of polymers and polymerization processes in dispersed systems (IUPAC Recommendations 2011)" (PDF).  
  3. ^ "Terminology for biorelated polymers and applications (IUPAC Recommendations 2012)" (PDF).  
  4. ^ McBain, J.W., Trans. Faraday Soc. 1913, 9, 99
  5. ^ Hartley, G.S., Aqueous Solutions of Paraffin Chain Salts, A Study in Micelle Formation, 1936, Hermann et Cie, Paris
  6. ^ N.J. Turro and A. Yekta, J. Am. Chem. Soc.100, 5951 (1978)
  7. ^ R. Nagarajan, Molecular Packing Parameter and Surfactant Self-Assembly:  The Neglected Role of the Surfactant Tail
  8. ^ Zana, Raoul; Marques, Carlos; Johner, Albert (2006-11-16). "Dynamics of micelles of the triblock copolymers poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) in aqueous solution". Advances in Colloid and Interface Science. Special Issue in Honor of Dr. K. L. Mittal. 123–126: 345–351.  
  9. ^ Nicolai, Taco; Colombani, Olivier; Chassenieux, Christophe. "Dynamic polymeric micelles versus frozen nanoparticles formed by block copolymers". Soft Matter 6 (14).  
  10. ^ Prescott, R.J. "Communications to the editor". Journal of Psychosomatic Research 27 (4): 327–329.  
  11. ^ Zhang, L; Eisenberg, A (1995). "Multiple Morphologies of "Crew-Cut" Aggregates of Polystyrene-b-poly(acrylic acid) Block Copolymers.". Science.  
  12. ^ a b Zhu, Jintao; Hayward, Ryan C. (2008-06-01). "Spontaneous Generation of Amphiphilic Block Copolymer Micelles with Multiple Morphologies through Interfacial Instabilities". Journal of the American Chemical Society 130 (23): 7496–7502.  
  13. ^ D'Addio, Suzanne M.; Saad, Walid; Ansell, Steven M.; Squiers, John J.; Adamson, Douglas H.; Herrera-Alonso, Margarita; Wohl, Adam R.; Hoye, Thomas R.; Macosko, Christopher W. (2012-08-20). "Effects of block copolymer properties on nanocarrier protection from in vivo clearance". Journal of Controlled Release 162 (1): 208–217.  
  14. ^ Chen, Xi; An, Yingli; Zhao, Dongyun; He, Zhenping; Zhang, Yan; Cheng, Jing; Shi, Linqi (August 2008). "Core−Shell−Corona Au−Micelle Composites with a Tunable Smart Hybrid Shell". Langmuir 24 (15): 8198–8204.  


  • J. M. Seddon, R. H. Templer. Polymorphism of Lipid-Water Systems, from the Handbook of Biological Physics, Vol. 1, ed. R. Lipowsky, and E. Sackmann. (c) 1995, Elsevier Science B.V. ISBN 0-444-81975-4
  • S.A. Baeurle, J. Kroener, Modeling effective interactions of micellar aggregates of ionic surfactants with the Gauss-Core potential, J. Math. Chem. 36, 409–421 (2004).
  • McBain, J.W., Trans. Faraday Soc. 1913, 9, 99.
  • Hartley, G.S., Aqueous Solutions of Paraffin Chain Salts, A Study in Micelle Formation, 1936, Hermann et Cie, Paris.
  • Makoto Takeo (1999). Disperse Systems, WILEY-VCH, ISBN 3-527-29458-9
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.