World Library  
Flag as Inappropriate
Email this Article

Miter joint

Article Id: WHEBN0001636581
Reproduction Date:

Title: Miter joint  
Author: World Heritage Encyclopedia
Language: English
Subject: Woodworking, Coping (joinery), Mitre box, Backsaw, Jigsaw (power tool)
Collection: Joinery, Metalworking, Woodworking
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Miter joint

Miter joint (pieces ready to be joined)
Miter joint of two pipes

A miter joint (mitre in British English), sometimes shortened to miter, is a joint made by beveling each of two parts to be joined, usually at a 45° angle, to form a corner, usually a 90° angle.[1] For woodworking, a disadvantage of a miter joint is its weakness, but it can be strengthened with a spline.[2] There are two common variations of a splined miter joint, one where the spline is long and runs the length of the mating surfaces and another where the spline is perpendicular to the joined edges.

Common applications include molding.

Contents

  • Non-perpendicular joints 1
  • 3D joints 2
  • See also 3
  • References 4
  • External links 5

Non-perpendicular joints

For miter joints occurring at angles other than 90°, for materials of the same cross-section the proper cut angle must be determined so that the two pieces to be joined meet flush (i.e. one piece's mitered end is not longer than the adjoining piece). To find the cut angle divide the angle at which the two pieces meet by two. Technically two different cut angles are required; one for each piece, where the second angle is 90° plus the aforementioned cut angle, but due to angular limitations in common cutting implements (hand circular saws, table saws) a single angle is required and is used to cut the first piece in one direction and the second piece in the opposite direction.

3D joints

When a piece is beveled at both ends, such that the two attached pieces do not lie in the same plane, a three-dimensional structure is obtained. In that case, it is also necessary to either rotate the piece in its longitudinal axis or to tilt the saw blade before beveling the second end.

When employing the miter joint to connect two pieces that have a non-circular cross-section it is typically desirable to have the longitudinal edges of the joined pieces match up properly at the joint. It is always possible to close a [3]structure constructed with pieces having non-circular cross section into a loop through properly matched miter joints (e.g. a picture frame). However, a three-dimensional loop from pieces with non-circular cross section need not close properly when attempting to miter it all the way round. In general, a twist occurs, causing the edges at the last joint to be misaligned.

See also

References

  1. ^ Oxford English Dictionary. Oxford University Press. 2009. A usually right-angled joint in wood or other material in which the angle made by the joined pieces is bisected by the line or plane of junction; more fully mitre joint. 
  2. ^ "Splined Miter Joint". Woodworkingtips.com. Retrieved 2012-04-01. 
  3. ^ planar

External links

  • Miter Saw Calculator
  • Verhoeff, Tom and Koos Verhoeff, PDF "The Mathematics of Mitering and Its Artful Application", Bridges Leeuwarden: Mathematical Connections in Art, Music, and Science, Proceedings of the Eleventh Annual Bridges Conference, in The Netherlands, pp. 225–234, July 2008.
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.