World Library  
Flag as Inappropriate
Email this Article

Mole fraction

Article Id: WHEBN0000020306
Reproduction Date:

Title: Mole fraction  
Author: World Heritage Encyclopedia
Language: English
Subject: Mass fraction (chemistry), Parts-per notation, Raoult's law, Mass concentration (chemistry), Flory–Huggins solution theory
Collection: Chemical Properties, Dimensionless Numbers of Chemistry
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Mole fraction

In chemistry, the mole fraction or molar fraction (x_i) is defined as the amount of a constituent (expressed in moles), n_i, divided by the total amount of all constituents in a mixture, n_{tot}:[1]

x_i = \frac{n_i}{n_{tot}}

The sum of all the mole fractions is equal to 1:

\sum_{i=1}^{N} n_i = n_{tot} ; \; \sum_{i=1}^{N} x_i = 1

The same concept expressed with a denominator of 100 is the mole percent or molar percentage (mol%).

The mole fraction is also called the amount fraction.[1] It is identical to the number fraction, which is defined as the number of molecules of a constituent N_i divided by the total number of all molecules N_{tot}. The mole fraction is sometimes denoted by the lowercase Greek letter \chi (chi) instead of a Roman x.[2][3] For mixtures of gases, IUPAC recommends the letter y.[1]

The National Institute of Standards and Technology of the United States prefers the term amount-of-substance fraction over mole fraction because it does not contain the name of the unit mole.[4]

Whereas mole fraction is a ratio of moles to moles, molar concentration is a ratio of moles to volume.

The mole fraction is one way of expressing the composition of a mixture with a dimensionless quantity; mass fraction (percentage by weight, wt%) and volume fraction (percentage by volume, vol%) are others.

Contents

  • Properties 1
  • Related quantities 2
    • Mass fraction 2.1
    • Mole percentage 2.2
    • Mass concentration 2.3
    • Molar concentration 2.4
    • Mass and molar mass 2.5
  • Spatial variation and gradient 3
  • References 4

Properties

Mole fraction is used very frequently in the construction of phase diagrams. It has a number of advantages:

  • it is not temperature dependent (such as molar concentration) and does not require knowledge of the densities of the phase(s) involved
  • a mixture of known mole fraction can be prepared by weighing off the appropriate masses of the constituents
  • the measure is symmetric: in the mole fractions x=0.1 and x=0.9, the roles of 'solvent' and 'solute' are reversed.
  • In a mixture of ideal gases, the mole fraction can be expressed as the ratio of partial pressure to total pressure of the mixture

Related quantities

Mass fraction

The mass fraction w_i can be calculated using the formula

w_i = x_i \cdot \frac {M_i}{M}

where M_i is the molar mass of the component i and M is the average molar mass of the mixture.

Replacing the expression of the molar mass:

w_i = x_i \cdot \frac {M_i}{\sum_i x_i M_i}

Mole percentage

Multiplying mole fraction by 100 gives the mole percentage, also referred as amount/amount percent (abbreviated as n/n%).

Mass concentration

The conversion to and from mass concentration \rho_i is given by:

x_i = \frac{\rho_i}{\rho} \cdot \frac{M}{M_i}

where M is the average molar mass of the mixture.

\rho_i = x_i \rho \cdot \frac{M_i}{M}

Molar concentration

The conversion to molar concentration c_i is given by:

c_i = \frac = x_i c

or

c_i = \frac

where M is the average molar mass of the solution, c total molar concentration and \rho is the density of the solution .

Mass and molar mass

The mole fraction can be calculated from the masses m_i and molar masses M_i of the components:

x_i= \frac}}}}

Spatial variation and gradient

In a spatially non-uniform mixture, the mole fraction gradient triggers the phenomenon of diffusion.

References

  1. ^ a b c IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version:  (2006–) "amount fraction".
  2. ^ Zumdahl, Steven S. (2008). Chemistry (8th ed. ed.). Cengage Learning. p. 201.  
  3. ^ Rickard, James N. Spencer, George M. Bodner, Lyman H. (2010). Chemistry : structure and dynamics. (5th ed. ed.). Hoboken, N.J.: Wiley. p. 357.  
  4. ^ Thompson, A.; Taylor, B. N. "The NIST Guide for the use of the International System of Units". http://physics.nist.gov/Pubs/SP811/sec08.html. National Institute of Standards and Technology. Retrieved 5 July 2014. 
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.