World Library  
Flag as Inappropriate
Email this Article

Sinking (metalworking)

Article Id: WHEBN0001897718
Reproduction Date:

Title: Sinking (metalworking)  
Author: World Heritage Encyclopedia
Language: English
Subject: Tool and die maker, Aluminium alloy inclusions, Raising (metalworking), Planishing, Shield boss
Collection: Jewellery Making, Metal Forming
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Sinking (metalworking)

Steel doming block

Sinking, also known as doming, dishing or dapping, is a metalworking technique whereby flat sheet metal is formed into a non-flat object by hammering it into a concave indentation. While sinking is a relatively fast method, it results in stretching and therefore thinning the metal, risking failure of the metal if it is 'sunk' too far.

Sinking is used in the manufacture of many items, from jewellery to plate armour.

Technique

Sinking stump

Sinking is performed by using a curved hammer or mallet-driven punch to force sheet metal into an indentation. The exact nature of these tools will vary greatly depending on the scale and nature of the work. Fine work will typically require a small doming punch and a doming block. Larger work may involve a special sinking hammer and sinking stump. The forming indentation need not be permanent; metal can be sunk into sandbags or lead blocks.

Sinking may be done when the metal is cold or hot. If a piece is extensively worked cold, it will work harden and require annealing to prevent cracking.

It also may be useful to planish the metal to smooth it out.

References

  • Rupert Finegold and William Seitz. Silversmithing. Krause; 1983. ISBN 0-8019-7232-9
  • Price, Brian R. Techniques of Medieval Armour Reproduction. Boulder, CO: Paladin Press, 2000. ISBN 1-58160-098-4


This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.