World Library  
Flag as Inappropriate
Email this Article

Splice joint

Article Id: WHEBN0003673665
Reproduction Date:

Title: Splice joint  
Author: World Heritage Encyclopedia
Language: English
Subject: Woodworking, Scarf joint, Woodworking joints, Rift sawing, Float (woodworking)
Collection: Joinery, Woodworking
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Splice joint

A splice joint is a method of joining two members end to end in woodworking. The splice joint is used when the material being joined is not available in the length required. It is an alternative to other joints such as the butt joint and the scarf joint. Splice joints are stronger than unenforced butt joints and have the potential to be stronger than a scarf joint.

Splices are therefore most often used when structural elements are required in longer lengths than the available material. The most common form of the splice joint is the half lap splice, which is common in building construction, where it is used to join shorter lengths of timber into longer beams.

Contents

  • Applications 1
  • Types of splice joints 2
    • Half lap splice joint 2.1
    • Bevel lap splice joint 2.2
    • Tabled splice joint 2.3
    • Tapered finger splice joint 2.4
  • References 3
  • External links 4

Applications

  • Joining structural members end to end

Types of splice joints

Half Lap Splice, Bevel Lap Splice and Tabled Splice Joint

There are four main types of splice joints: Half lap, Bevel lap, Tabled, and Tapered finger.

Half lap splice joint

The half lap splice joint is the simplest form of the splice joint and is commonly used to join structural members where either great strength is not required or reinforcement, such as mechanical fasteners, are to be used.

The joint is cut as for a half lap.

Bevel lap splice joint

The bevel lap is a variation of the half-lap in which the cheeks of the opposing members are cut at an angle of 5 to 10 degrees, sloping back away from the end of the member, so that some resistance to tension is introduced. This helps to prevent the members from being pulled apart.

Tabled splice joint

A wedged tabled splice joint
The tabled splice joint is another variation of the half lap. The cheeks are cut with interlocking surfaces so that when brought together the joint resists being pulled apart.

Tapered finger splice joint

The tapered finger splice joint requires a series of matching 'fingers' or interlocking prominences to be cut on the ends of opposing members. The joint is brought together and glued, with the fingers providing substantial glue surface.

This joint is commonly used in the production of building materials from smaller offcuts of timber. It is commonly found in skirting, architrave, and fascia.

The joint is usually made by machine.

References

External links

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.