World Library  
Flag as Inappropriate
Email this Article

Stop bath

Article Id: WHEBN0000494282
Reproduction Date:

Title: Stop bath  
Author: World Heritage Encyclopedia
Language: English
Subject: Mordançage, Photography, Versamat, Citric acid, Snoot
Collection: Photographic Processes
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Stop bath

Stop bath is a chemical bath usually used in processing traditional black-and-white photographic films, plates, and paper used after the material has finished developing. The purpose of the stop bath is to halt the development of the film, plate, or paper by either washing off the developing chemical or neutralizing it. With the former, a simple water rinse can be used between developer and fixer, but the development process continues (though possibly at a very low level) for an indefinite and uncontrolled period of time during the rinsing.

Where an immediate stop of development is desired, a stop bath will usually consist of some concentration of alkaline solutions, stop bath halts the development process almost instantly and thus provides more precise control of the development time. It also cuts overall processing time, because the required immersion time in the stop bath—typically fifteen to thirty seconds—is much shorter than the time required for an adequate plain-water rinse. As well, by neutralizing the alkalinity of basic developers, it can help to preserve the strength of the fixer, making it last longer.

Stop bath accounts for the characteristic vinegar-like odor of the traditional darkroom. In its concentrated form it can cause chemical burns, but is harmless when diluted to a working solution. Stop bath becomes exhausted when bases carried over from the developer cause the solution to become alkaline. For indicator stop bath -- a stop bath that changes colours to indicate when the stop bath is exhausted and no longer effective -- the pH indicator bromothymol violet is used to determine when the solution has become too alkaline to use. Low-odor stop baths use citric acid or sodium bisulfite in place of acetic acid.

Sources and notes

  • Black & White Film Developing
  • Odourless stop bath
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.