World Library  
Flag as Inappropriate
Email this Article


Article Id: WHEBN0000092981
Reproduction Date:

Title: Tensegrity  
Author: World Heritage Encyclopedia
Language: English
Subject: Buckminster Fuller, Upload log archive/October 2002, Syntegrity, Kurilpa Bridge, List of largest domes
Collection: Buckminster Fuller, Tensile Architecture
Publisher: World Heritage Encyclopedia


Tensegrity, tensional integrity or floating compression, is a structural principle based on the use of isolated components in compression inside a net of continuous tension, in such a way that the compressed members (usually bars or struts) do not touch each other and the prestressed tensioned members (usually cables or tendons) delineate the system spatially.[1]

The term tensegrity was coined by Buckminster Fuller in the 1960s as a portmanteau of "tensional integrity".[2] The other denomination of tensegrity, floating compression, was used mainly by Kenneth Snelson.


  • Concept 1
  • Applications 2
  • Biology 3
  • History 4
  • Stability 5
    • Tensegrity prisms 5.1
    • Tensegrity Icosahedra 5.2
  • Patents 6
  • Basic tensegrity structures 7
  • See also 8
  • References 9
    • Gallery 9.1
  • Bibliography 10
  • Further reading 11
  • External links 12


The Skylon at the Festival of Britain, 1951

Tensegrity structures are structures based on the combination of a few simple design patterns:

  • loading members only in pure compression or pure tension, meaning the structure will only fail if the cables yield or the rods buckle
  • preload or tensional prestress, which allows cables to be rigid in compression
  • mechanical stability, which allows the members to remain in tension/compression as stress on the structure increases

Because of these patterns, no structural member experiences a bending moment. This can produce exceptionally rigid structures for their mass and for the cross section of the components.

A conceptual building block of tensegrity is seen in the 1951 Skylon. Six cables, three at each end, hold the tower in position. The three cables connected to the bottom "define" its location. The other three cables are simply keeping it vertical.

Stereo image
Left frame 
Animation The simplest tensegrity structure. Each of three compression members (green) is symmetric with the other two, and symmetric from end to end. Each end is connected to three cables (red) which provide compression and which precisely define the position of that end in the same way as the three cables in the Skylon define the bottom end of its tapered pillar.
Stereo image
Left frame 
Animation A similar structure but with four compression members.

A three-rod tensegrity structure (shown) builds on this simpler structure: the ends of each rod look like the top and bottom of the Skylon. As long as the angle between any two cables is smaller than 180°, the position of the rod is well defined.

Variations such as Needle Tower involve more than three cables meeting at the end of a rod, but these can be thought of as three cables defining the position of that rod end with the additional cables simply attached to that well-defined point in space.

Eleanor Hartley points out visual transparency as an important aesthetic quality of these structures.[3] Korkmaz et al.[4][5] put forward that the concept of tensegrity is suitable for adaptive architecture thanks to lightweight characteristics.


A 12m high tensegrity structure exhibit at the Science City, Kolkata.

The idea was adopted into architecture in the 1960s when Maciej Gintowt and Maciej Krasiński, architects of Spodek, a venue in Katowice, Poland, designed it as one of the first major structures to employ the principle of tensegrity. The roof uses an inclined surface held in check by a system of cables holding up its circumference.

In the 1980s 1996 Summer Olympics is a large tensegrity structure of similar design to the aforementioned Gymnastics Hall.

Shorter columns or struts in compression are stronger than longer ones. This in turn led some, namely Fuller, to make claims that tensegrity structures could be scaled up to cover whole cities.

Largest Tensegrity bridge in the world Kurilpa Bridge- Brisbane

On 4 October 2009, the Kurilpa Bridge opened across the Brisbane River in Queensland, Australia. A multiple-mast, cable-stay structure based on the principles of tensegrity, it is currently the world's largest such structure.


Biotensegrity, a term coined by Dr. Stephen Levin, is the application of tensegrity principles to biologic structures.[6] Biological structures such as muscles, bones, fascia, ligaments and tendons, or rigid and elastic cell membranes, are made strong by the unison of tensioned and compressed parts. The muscular-skeletal system is a synergy of muscle and bone. The muscles and connective tissues provide continuous pull[7] and the bones present the discontinuous compression.

A theory of tensegrity in natural selection pressures would strongly favor biological systems organized in a tensegrity manner.

As Ingber explains:

The tension-bearing members in these structures — whether Fuller's domes or Snelson's sculptures — map out the shortest paths between adjacent members (and are therefore, by definition, arranged geodesically) Tensional forces naturally transmit themselves over the shortest distance between two points, so the members of a tensegrity structure are precisely positioned to best withstand stress. For this reason, tensegrity structures offer a maximum amount of strength.


Kenneth Snelson's 1948 X-Module Design as embodied in a two-module column[9]

The origins of tensegrity are controversial.[10] In 1948, artist Kenneth Snelson produced his innovative "X-Piece" after artistic explorations at Black Mountain College (where Buckminster Fuller was lecturing) and elsewhere. Some years later, the term "tensegrity" was coined by Fuller, who is best known for his geodesic domes. Throughout his career, Fuller had experimented incorporating tensile components in his work, such as in the framing of his dymaxion houses.[11]

Snelson's 1948 innovation spurred Fuller to immediately commission a mast from Snelson. In 1949, Fuller developed an vitrine.[13]

Snelson's best known piece is his 18-meter-high Needle Tower of 1968.

Russian artist

  • "Tensegrity" Scholarpedia article
  • Point, contrepoint. French tensegrity, art and design.
  • Scientific Publications in the Field of Tensegrity by Swiss Federal Institute of Technology (EPFL), Applied Computing and Mechanics Laboratory (IMAC)
  • Valentin Gomez-Jauregui's site A web page (in English and Spanish) showing images, references and explanations about tensegrity.
  • Kenneth Snelson's site with an article on the theory and development of tensegrity as well as pictures of his sculptures from desktop pieces to 90-foot towers.
  • Kirby Urner's page on Kenneth Snelson, developed in collaboration with the artist before the above official site came on-line, still relevant.
  • Dubai Tensegrity Tower designed by Aurel von Richthofen includes diagrams of proposed tower with elevator.
  • Ortegrity by Timothy Wilken, MD 2002, 70-page-long PDF document describing human interactions in terms of tensegrity.
  • Tensegrity in a Cell—This interactive feature allows you to control a cell's internal structural elements. From Donald Ingber and the research department of Children's Hospital Boston.
  • Stephen Levin's Biotensegrity site Several papers on the tensegrity mechanics of biologic structures from viruses to vertebrates by an Orthopedic Surgeon.
  • The Dynamic Template site: an article by Dr. Lofthouse that demonstrates how spatially organised flows of aminophospholipids in the red blood cell membrane convert the cell surface into a "Dynamic Template" for its cortical Spectrin cytoskeleton. This is the only model to date that provides biological cells with a mechanism capable of pre-stressing flexible, membrane-associated protein networks, which is absent from Glanz & Ingbers' exclusively protein-based models of cellular "tensegrity" structures.
  • Tensegrity examples Several tensegrity examples by Marcelo Pars.
  • Sine Utilitate Examples of contemporary sculptural constructions by Christos Saccopoulos using tensegrity principles.
  • Virtual 3D tensegrity structures an interactive Java applet simulating various selectable structures.

External links

  • Di Carlo, Biagio. "STRUTTURE TENSEGRALI". Quaderni di Geometria Sinergetica, Pescara 2004.
  • Edmondson, Amy. A Fuller Explanation, EmergentWorld LLC, 2007. Earlier version available online at
  • Forbes, Peter. The Gecko's Foot: How Scientists are Taking a Leaf from Nature's Book, Harper Perennial, 2006, pp. 197–230.
  • Hanaor, Ariel, "Tensegrity: Theory and Application," Chapter 13 (pp. 385–408) in J. François Gabriel, Beyond the Cube: The Architecture of Space Frames and Polyhedra, New York: John Wiley & Sons, Inc., 1997.
  • Kenner, Hugh. Geodesic Math and How to Use It, Berkeley, California: University of California Press, 1976. Now back in print. This is a good starting place for learning about the mathematics of tensegrity and building models.
  • Masic, Milenko, Robert E. Skelton and Philip E. Gill, "Algebraic tensegrity form-finding," International Journal of Solids and Structures, Vol. 42, Nos. 16-17 (Aug 2005), pp. 4833–4858. They present the remarkable result that any linear transformation of a tensegrity is also a tensegrity.
  • Motro, R., "Tensegrity Systems: The State of the Art," International Journal of Space Structures, Vol. 7 (1992), No. 2, pp. 75–84.
  • Pugh, Anthony. An Introduction to Tensegrity, University of California Press, Berkeley and Los Angeles California, 1976, ISBN 0-520-03055-9
  • Snelson, Kenneth. Letter to R. Motro, International Journal of Space Structures, November 1990.
  • Souza, et al., "Prestress revealed by passive co-tension at the ankle joint", Journal of Biomechanics, October 2009.
  • Vilnay, Oren, Cable Nets and Tensegric Shells: Analysis and Design Applications, New York: Ellis Horwood Ltd., 1990.
  • Wang, Bin-Bing, "Cable-strut systems: Part I - Tensegrity," Journal of Constructional Steel Research, Vol. 45 (1998), No. 3, pp. 281–289.
  • Wilken, Timothy. Seeking the Gift Tensegrity, TrustMark, 2001.

Further reading

  • Fuller, Buckminster. SYNERGETICS—Explorations in the Geometry of Thinking, Volumes I & II, New York, Macmillan Publishing Co, 1975, 1979.
  • Fuller, Buckminster. "Tensegrity," Portfolio and Art News Annual, No. 4 (1961), pp. 112–127, 144, 148.
  • Fuller, R. Buckminster; Marks, Robert. The Dymaxion World of Buckminster Fuller, Garden City, New York: Anchor Books, 1973 (originally published in 1960 by So. Ill. Univ. Press), Figs. 261-280. A good overview on the scope of tensegrity from Fuller's point of view, and an interesting overview of early structures with careful attributions most of the time.
  • Gómez-Jáuregui, Valentin (2007). Tensegridad. Estructuras Tensegríticas en Ciencia y Arte (in Español). Santander: Universidad de Cantabria.  
  • Gómez-Jáuregui, Valentín (2010). Tensegrity Structures and their Application to Architecture. Santander: Servicio de Publicaciones de la Universidad de Cantabria. isbn=978-84-8102-575-0. 
  • Korkmaz, Sinan; Bel Hadj Ali, Nizar, Smith, Ian F.C. (2011). "Configuration of Control System for Damage Tolerance of a Tensegrity Bridge". Advanced Engineering Informatics 26: 145.  
  • Korkmaz, Sinan; Bel Hadj Ali, Nizar, Smith, Ian F.C. (June 2011). "Determining Control Strategies for Damage Tolerance of an Active Tensegrity Structure" (PDF). Engineering Structures 33 (6): 1930–1939.  
  • Lalvani, Haresh (ed.) (1996). "Origins of Tensegrity: Views of Emmerich, Fuller and Snelson". International Journal of Space Structures 11 (1, 2). pp. 27–55. 
  • Juan, S. J.; Tur, J M (July 2008), "Tensegrity frameworks: Static analysis review", Mechanism and Machine Theory, 43, 7: 859–881,  


  1. ^ Gómez-Jáuregui (2010), Fig. 2.1, p. 28.
  2. ^ Fuller and Marks (1960), Fig. 270.
  3. ^ Fuller and Marks (1960), Fig. 268.
  4. ^ Lalvani (1996), p. 47


  1. ^ Gómez-Jáuregui, V (2010). Tensegrity Structures and their Application to Architecture. Servicio de Publicaciones Universidad de Cantabria, p.19.  
  2. ^ Swanson, RL (2013). "Biotensegrity: a unifying theory of biological architecture with applications to osteopathic practice, education, and research-a review and analysis". The Journal of the American Osteopathic Association 113 (1): 34–52.  
  3. ^ Eleanor Hartley, "Ken Snelson and the Aesthetics of Structure," in the Marlborough Gallery catalogue for Kenneth Snelson: Selected Work: 1948 - 2009, exhibited February 19 through March 21, 2009.
  4. ^ Korkmaz, et al. (June 2011)
  5. ^ Korkmaz, et. al (2011)
  6. ^ Levin, Stephen, "Tensegrity, The New Biomechanics"; Hutson, M & Ellis, R (Eds.), Textbook of Musculoskeletal Medicine. Oxford: Oxford University Press. 2006
  7. ^ Musculoskeletal Prestress, "[2]", Journal of Biomechanics, October 2009.
  8. ^ Ingber, Donald E. (January 1998). "The Architecture of Life" (PDF). Scientific American. 
  9. ^ Maria Gough, "In the Laboratory of Constructivism: Karl Ioganson's Cold Structures" October, Vol. 84 (Spring, 1998), p. 109.
  10. ^ Gómez-Jáuregui, V. (2009). "Controversial Origins of Tensegrity" (PDF). International Association of Spatial Structures IASS Symposium 2009, Valencia. 
  11. ^ Dymaxion World of Buckminster Fuller, chapter on Tensegrity.
  12. ^ See photo of Fuller's work at this exhibition in his 1961 article on tensegrity for the Portfolio and Art News Annual (No.4).
  13. ^ Lalvani (1996), p. 47.
  14. ^ Droitcour, Brian (2006-08-18). "Building Blocks".  
  15. ^ Gough (1998), pp. 90-117.
  16. ^ In Snelson's article for Lalvani, 1996, I believe.
  17. ^ David Georges Emmerich, Structures Tendues et Autotendantes, Paris: Ecole d'Architecture de Paris la Villette, 1988, pp. 30-31.
  18. ^ Burkhardt, Robert William, Jr. (2008), A Practical Guide to Tensegrity Design (PDF) 
  19. ^ Sultan, Cornel; Martin Corless; Robert E. Skelton (2001). "The prestressability problem of tensegrity structures: some analytical solutions" (PDF). International Journal of Solids and Structures 26: 145. 
  20. ^ "Tensegrity Figuren". Universität Regensburg. Retrieved 2 April 2013. 


See also

Basic tensegrity structures

  • U.S. Patent 3,063,521, "Tensile-Integrity Structures," November 13, 1962, Buckminster Fuller.
  • French Patent No. 1,377,290, "Construction de Reseaux Autotendants", September 28, 1964, David Georges Emmerich.
  • French Patent No. 1,377,291, "Structures Linéaires Autotendants", September 28, 1964, David Georges Emmerich.
  • U.S. Patent 3,139,957, "Suspension Building" (also called aspension), July 7, 1964, Buckminster Fuller.
  • U.S. Patent 3,169,611, "Continuous Tension, Discontinuous Compression Structure," February 16, 1965, Kenneth Snelson.
  • U.S. Patent 3,866,366, "Non-symmetrical Tension-Integrity Structures," February 18, 1975, Buckminster Fuller.


Since the tensegrity icosahedron represents an extremal point of the above relation, it has infinitesimal mobility: a small change in the length s of the tendon (e.g. by stretching the tendons) results in a much larger change of the distance 2d of the struts.

In the particular case s = \sqrt{3/2}\,l the two extremes coincide, and d=\frac{1}{2}\,l, therefore the figure is the stable tensegrity icosahedron.

Imagine this figure built from struts of given length 2l and tendons (connecting neighboring vertices) of given length s, with s > \sqrt{3 / 2}\,l. The relation tells us there are two possible values for d: one realized by pushing the struts together, the other by pulling them apart. For example, for s=\sqrt{2}\,l the minimal figure (d = 0) is a regular octahedron and the maximal figure (d = l) is a quasiregular cubeoctahedron. In the case s =\frac {1} {2} (\sqrt{5}- 1)l we have s = 2d, so the convex hull of the maximal figure is a regular icosahedron.

s^2 = (d-l)^2 + d^2 + l^2 = 2(d-\frac{1}{2} \,l)^2 + \frac{3}{2} \,l^2

The distance s between any two neighboring vertices (0,d, l) and (d, l, 0) is

Consider a cube of side length 2d, centered at the origin. Place a strut of length 2l in the plane of each cube face, such that each strut is parallel to one edge of the face and is centered on the face. Moreover, each strut should be parallel to the strut on the opposite face of the cube, but orthogonal to all other struts. If the Cartesian coordinates of one strut are (0,d,l) and (0,d,–l), those of its parallel strut will be, respectively, (0,–d,–l) and (0,–d,l). The coordinates of the other strut ends (vertices) are obtained by permuting the coordinates, e.g., (0,d,l)→(d,l,0)→(l,0,d) (rotational symmetry in the main diagonal of the cube).

The following is a mathematical model for figures related to the tensegrity icosahedron, explaining why the tensegrity icosahedron is a stable construction, albeit with infinitesimal mobility.[20]

Different shapes of tensegrity icosahedra, depending on the ratio between the lengths of the tendons and the struts.
Mathematical model of the tensegrity icosahedron

Tensegrity Icosahedra

The stability (“prestressability”) of several 2-stage tensegrity structures are analyzed by Sultan, et al.[19]

The three-rod tensegrity structure (3-way prism) has the property that, for a given (common) length of compression member “rod” (there are three total) and a given (common) length of tension cable “tendon” connecting the rod ends together (there are six total), there is a particular value for the (common) length of the tendon connecting the rod tops with the neighboring rod bottoms (there are three total) that causes the structure to hold a stable shape. For such a structure, it is straightforward to prove that the triangle formed by the rod tops and that formed by the rod bottoms are rotated with respect to each other by an angle of 5π/6 (radians).[18]

Tensegrity prisms



This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.