#jsDisabledContent { display:none; } My Account |  Register |  Help

Post Hoc Analysis

Article Id: WHEBN0004570698
Reproduction Date:

 Title: Post Hoc Analysis Author: World Heritage Encyclopedia Language: English Subject: Medical statistics Collection: Publisher: World Heritage Encyclopedia Publication Date:

Post Hoc Analysis

In the design and analysis of experiments, post-hoc analysis (from Latin post hoc, "after this") consists of looking at the data—after the experiment has concluded—for patterns that were not specified a priori. It is sometimes called by critics data dredging to evoke the sense that the more one looks the more likely something will be found. More subtly, each time a pattern in the data is considered, a statistical test is effectively performed. This greatly inflates the total number of statistical tests and necessitates the use of multiple testing procedures to compensate. However, this is difficult to do precisely and in fact most results of post-hoc analyses are reported as they are with unadjusted p-values. These p-values must be interpreted in light of the fact that they are a small and selected subset of a potentially large group of p-values. Results of post-hoc analyses should be explicitly labeled as such in reports and publications to avoid misleading readers.

In practice, post-hoc analyses are usually concerned with finding patterns and/or relationships between subgroups of sampled populations that would otherwise remain undetected and undiscovered were a scientific community to rely strictly upon a priori statistical methods. Post-hoc tests — also known as a posteriori tests — greatly expand the range and capability of methods that can be applied in exploratory research. Post-hoc examination strengthens induction by limiting the probability that significant effects will seem to have been discovered between subgroups of a population when none actually exist. As it is, many scientific papers are published without adequate, preventative post-hoc control of the Type I Error Rate.[1]

Post-hoc analysis is an important procedure without which multivariate hypothesis testing would greatly suffer, rendering the chances of discovering false positives unacceptably high. Ultimately, post-hoc testing creates better informed scientists who can therefore formulate better, more efficient a priori hypotheses and research designs.

Relationship with the Multiple Comparisons Problem

In its most literal and narrow sense, post-hoc analysis simply refers to unplanned data analysis performed after the data is collected in order to reach further conclusions. In this sense, even a test that does not provide Type I Error Rate [1] protection, using multiple comparisons methods, is considered as post-hoc analysis. A good example is performing initially unplanned multiple t-tests at level \alpha\,\!, following an \alpha\,\! level anova test. Such post-hoc analysis does not include multiple testing procedures, which are sometimes difficult to perform precisely. Unfortunately, analyses such as the above are still commonly conducted and their results reported with unadjusted p-values. Results of post-hoc analyses which do not address the multiple comparisons problem should be explicitly labeled as such to avoid misleading readers.

In the wider and more useful sense, post hoc analysis tests enable protection from the multiple comparisons problem, whether the inferences made are selective or simultaneous. The type of inference is related directly to the hypotheses family of interest. Simultaneous inference indicates that all inferences, in the family of all hypotheses, are jointly corrected up to a specified type I error rate. In practice, post-hoc analyses are usually concerned with finding patterns and/or relationships between subgroups of sampled populations that would otherwise remain undetected and undiscovered were a scientific community to rely strictly upon a priori statistical methods . Therefore, simultaneous inference may be too conservative for certain large scale problems that are currently being addressed by science. For such problems, a selective inference approach might be more suitable, since it assumes that sub-groups of hypotheses from the large scale group can be viewed as a family. Selective post hoc examination strengthens induction by limiting the probability that significant differences will seem to have been discovered between sub-groups of a population when none actually exist. Accordingly, p-values of such sub-groups must be interpreted in light of the fact that they are a small and selected subset of a potentially large group of p-values.

List of post-hoc tests

The following are referred to as "post-hoc tests". However, on some occasions a researcher may have initially planned on using them, thus referring to them as "post-hoc tests" is not entirely accurate. For instance, The Student–Newman–Keuls and Tukey's methods are often referred to as post-hoc. However, it is not uncommon to plan on testing all pairwise comparisons before seeing the data. Therefore, in such cases, these tests are better categorized as a priori.

Fisher's least significant difference (LSD)[2]

This technique was developed by Ronald Fisher in 1935 and is used most commonly after a hypothesis in an analysis of variance (ANOVA) test, is rejected. A significant ANOVA test only reveals that not all the means compared in the test are equal. Fisher's LSD is basically a set of individual t-tests, differentiated only in the calculation of the standard deviation. In each t-test, a pooled standard deviation is computed from only the two groups being compared, while the Fisher's LSD test computes the pooled standard deviation from all groups - thus increasing power. Fisher's LSD does not correct for multiple comparisons.

The Bonferroni procedure

• Denote by p_{i} the p-value for testing H_{i}
• reject H_{i} if p_{i} \leq \frac{\alpha}{m}
• m being the number of hypotheses

Although mainly used with planned contrasts, it can be used as a post-hoc test for comparisons between data groups of interest in the experiment after the fact. It is flexible and very simple to compute, but naive in its idea of retaining of familywise error rate by division in m. This method results in a large reduction in the power of the test. That is, because the cut-off value is reduced, it becomes substantially more difficult for any result to be concluded as being statistically significant, irrespective of whether it is true or not.

Holm–Bonferroni method

• Start by ordering the p-values P_{(1)} \ldots P_{(m)} and let the associated hypotheses be H_{(1)} \ldots H_{(m)}
• Let R be the smallest k such that P_{(k)} > \frac{\alpha}{m+1-k}
• Reject the null hypotheses H_{(1)} \ldots H_{(R-1)}. If R = 1 then none of the hypotheses are rejected.
• This procedure is uniformly better than Bonferroni's.
• It is worth noticing here that the reason why this procedure controls the family-wise error rate for all the m hypotheses at level α in the strong sense, is because it is essentially a closed testing procedure. As such, each intersection is tested using the simple Bonferroni test.

The Bonferroni-Holm method introduces a correction to Bonferroni's method that allows more rejections, and is therefore less conservative and more powerful than the Bonferroni method.

Newman–Keuls method

A stepwise multiple comparisons procedure used to identify sample means that are significantly different from each other. It is used often as a post-hoc test whenever a significant difference between three or more sample means has been revealed by an analysis of variance (ANOVA)

Duncan's new multiple range test (MRT)

Duncan developed this test as a modification of the Newman–Keuls method that would have greater power. Duncan's MRT is especially protective against false negative (Type II) error at the expense of having a greater risk of making false positive (Type I) errors.

Rodger's method

Rodger's method is a procedure for examining research data post hoc following an 'omnibus' analysis, that is after carrying out an analysis of variance (ANOVA). Rodger's method utilizes a decision-based error rate, arguing that it is not the probability (\alpha) of rejecting H_0 in error that should be controlled, rather it is the average rate of rejecting true null contrasts that should be controlled. Meaning we should control the expected rate (\operatorname{E}\alpha) of true null contrast rejection.

Scheffé's method

Scheffé's method applies to the set of estimates of all possible contrasts among the factor level means, not just the pairwise differences. Having an advantage of flexibility, it can be used to test any number of post-hoc simple and/or complex comparisons that appear interesting. However, the drawback of this flexibility is a low type I error rate, and a low power.

Tukey's procedure

• Tukey's procedure is only applicable for pairwise comparisons.
• It assumes independence of the observations being tested, as well as equal variation across observations (homoscedasticity).
• The procedure calculates for each pair the studentized range statistic: \frac {Y_{A}-Y_{B}} {SE} where Y_{A} is the larger of the two means being compared, Y_{B} is the smaller, and SE is the standard error of the data in question.
• Tukey's test is essentially a Student's t-test, except that it corrects for family-wise error-rate.

A correction with a similar framework is Fisher’s LSD (Least Significant Difference).

Dunnett's correction

Charles Dunnett (1955, 1966; not to be confused with Dunn) described an alternative alpha error adjustment when k groups are compared to the same control group. Now known as Dunnett's test, this method is less conservative than the Bonferroni adjustment.

Benjamini-Hochberg (BH) procedure

BH-procedure is a step-up procedure iterating over H_1 \ldots H_m null hypotheses tested and P_{(1)} \ldots P_{(m)}, their ordered p-values in an increasing order. The method then proceeds to identify the rejected null hypotheses from the above set, whilst controlling the false discovery rate (at level \alpha) under the premise that the total m hypotheses are independent.

References

1. ^ a b Jaccard, J.; Becker, M. A.; Wood, G. (1984). "Pairwise multiple comparison procedures: A review". Psychological Bulletin 96 (3): 589.
2. ^ Hayter, A. J. (1986). "The Maximum Familywise Error Rate of Fisher's Least Significant Difference Test". Journal of the American Statistical Association 81 (396): 1000–1004.

Bibliography

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.

Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.