World Library  
Flag as Inappropriate
Email this Article


Article Id: WHEBN0000051736
Reproduction Date:

Title: Blimp  
Author: World Heritage Encyclopedia
Language: English
Subject: List of unmanned aerial vehicles of China, Battle of Point Judith, Airship, American Blimp MZ-3, American Blimp Corporation
Publisher: World Heritage Encyclopedia


The Spirit of Goodyear, one of the iconic Goodyear Blimps

A blimp, or non-rigid airship, is an airship without an internal structural framework or a keel. Unlike semi-rigid and rigid airships (e.g. Zeppelins), blimps rely on the pressure of the lifting gas (usually helium, rather than hydrogen) inside the envelope and the strength of the envelope itself to maintain its shape. The term is sometimes also used to refer to the tethered craft properly known as moored balloons. While often very similar in shape, moored balloons have no propulsion and are tethered to the ground.


Steerable ducted fans on a Skyship 600 provide thrust, limited direction control, and also serve to inflate the ballonets to maintain the necessary overpressure

Since blimps keep their shape with internal overpressure, typically the only solid parts are the passenger car (gondola) and the tail fins. A non-rigid airship that uses heated air instead of a light gas (such as helium) as a lifting medium is called a hot-air airship (sometimes there are battens near the bow, which assist with higher forces there from a mooring attachment or from the greater aerodynamic pressures there).

Volume changes of the lifting gas due to temperature changes or to changes of altitude are compensated for by pumping air into internal ballonets (air bags) to maintain the overpressure. Without sufficient overpressure, the blimp loses its ability to be steered and is slowed due to increased drag and distortion. The propeller air stream can be used to inflate the ballonets and so the hull. In some models, such as the Skyship 600, differential ballonet inflation can provide a measure of pitch trim control.

The engines driving the propellers are usually directly attached to the gondola, and in some models are partly steerable.

Blimps are the most commonly built airships because they are relatively easy to build and easy to transport once deflated. However, because of their unstable hull, their size is limited. A blimp with too long a hull may kink in the middle when the overpressure is insufficient or when maneuvered too fast (this has also happened with semi-rigid airships with weak keels). This led to the development of semi-rigids and rigid airships.

Modern blimps are launched somewhat heavier than air (overweight), in contrast to historic blimps. The missing lift is provided by lifting the nose and using engine power, or by angling the engine thrust. Some types also use steerable propellers or ducted fans. Operating in a state heavier than air avoids the need to dump ballast at lift-off and also avoids the need to lose costly lifting gas on landing.


A modern blimp from Airship Management Services showing a strengthened nose, ducted fans attached to the gondola under the hull, and cable-braced fins at the tail

The origin of the word "blimp" has been the subject of some confusion. Ege notes two possible derivations:[1]

Colloquially [non-rigid airships] always were referred to as 'Blimps'. Over the years several explanations have been advanced about the origin of this word. the most common is that in the military vernacular the Type B was referred to as 'limp bag', which was simply abbreviated to 'blimp'. An alternative explanation is that on 5 December 1915 A. D. Cunningham, R.N., who designed the SSZ type, flipped the envelope of a non-rigid airship with his fingers during an inspection, which produced a sound that he pronounced as 'blimp'; and that the word then caught on as the nickname for all small non-rigid airships.

The onomatopoeic derivation, as the sound the airship makes when one taps the envelope (balloon) with a finger, has been recorded in the British Aeronautical Journal.[2]

A 1943 etymology published in the New York Times supports the British origin during the First World War when the British were experimenting with lighter-than-air craft. The initial non-rigid aircraft was called the A-limp; and a second version called the B-limp was deemed more satisfactory.[3]

Yet a third derivation is given by Barnes & James in Shorts Aircraft since 1900:

In February 1915 the need for anti-submarine patrol airships became urgent, and the Submarine Scout type was quickly improvised by hanging an obsolete B.E.2c fuselage from a spare Willows envelope; this was done by the R.N.A.S. at Kingsnorth, and on seeing the result for the first time, Horace Short, already noted for his very apt and original vocabulary, named it "Blimp", adding, "What else would you call it?"[4]

Dr. A.D. Topping researched the origins of the word and concluded that the British had never had a "Type B, limp" designation, and that Cunningham's coinage appeared to be the correct explanation.[5]

The Oxford English Dictionary notes its use in print in 1916 "Visited the Blimps..this afternoon at Capel." and in 1918 (in the Illustrated London News) "an onomatopœic name invented by that genius for apposite nomenclature, the late Horace Shortt." The B-limp [6]


Advertising blimp landing at local airport in New Jersey.

The B class blimps were patrol airships operated by the United States Navy during and shortly after World War I. The Navy learned a great deal from the DN-1 fiasco. The result was the very successful B-type airships. Dr. Jerome Hunsaker was asked to develop a theory of airship design, Lt. John H. Towers returned from Europe having inspected British designs, the Navy sought bids for 16 blimps from American manufacturers. On 4 February 1917 the Secretary of the Navy directed that 16 nonrigid airships of Class B be procured. [1] Ultimately Goodyear built 9 envelopes, Goodrich built 5 and Curtiss built the gondolas for all of those 14 ships. Connecticut Aircraft contracted with U.S. Rubber for its two envelopes and with Pigeon Fraser for its gondolas. The Curtiss-built gondolas were modified JN-4 fuselages and were powered by OX-5 engines. The Connecticut Aircraft blimps were powered by Hall-Scott engines.

In 1930 a former German airship officer, Captain Anton Heinen, working in the US for the US Navy on its dirigible fleet, attempted to design and build a four place blimp called the "family air yacht" for private fliers which the inventor claimed would be priced below $10,000 and easier to fly than a fixed wing aircraft if placed in production. It was unsuccessful.[7][8]

Currently, there are approximately 13 active advertising airships in the world today. Van Wagner Airship Group is the owner and operator of 8 of these active ships, including the Hood Blimp, DirecTV blimp, and the MetLife blimp. [9]

Examples of non-rigid airships

There are several blimps worldwide.[10] Some examples include:

See also


  1. ^ Ege, L, Balloons and Airships, Blandford, 1973
  2. ^ The Aeronautical Journal ( 
  3. ^ "Origin of 'Blimp' Explained," New York Times. January 3, 1943
  4. ^ Barnes & James, p.13
  5. ^ , Lulu 2013, Page 119These Are the Voyagesvan Beverhoudt, A.;
  6. ^ "blimp, n." OED Online. Oxford University Press, March 2014. Web. 15 April 2014.
  7. ^ , November 3rd 1930Time Magazine"Aeronautics: Air Yacht"
  8. ^ , December 1930Popular Mechanics"Dirigible Air Yacht Has Automobile Cabin"
  9. ^ [1]
  10. ^ "FAQs – Business of blimps".  
  11. ^ "The MetLife Blimp".  


External links

  • "Gas Bags Go On Patrol", June 1943, Popular Mechanics detailed article on antisubmarine blimps during World War Two
  • "How The First Sea-Air Rescue Was Made", October 1944, Popular Science first air-to-sea rescue without aircraft landing first
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.