World Library  
Flag as Inappropriate
Email this Article


Article Id: WHEBN0002121806
Reproduction Date:

Title: Cow-calf  
Author: World Heritage Encyclopedia
Language: English
Subject: List of GM-EMD locomotives, Glossary of North American railway terms, Baldwin S-8, Diesel locomotives, Twin unit
Publisher: World Heritage Encyclopedia


Cow and calf

In North American railroading, a cow-calf (also cow and calf) locomotive is a set of switcher-type diesel locomotives. The set usually is a pair; some 3-unit sets (with two calves) were built, but this was rare. A cow is equipped with a driving cab; a calf is not. The two are coupled together (either with regular couplers or a semi-permanent drawbar) and are connected with MU cables and brake lines so that both locomotive units can be operated from a single cab.

Cows are analogous to A units and calves to B unit road locomotives. Both have prime movers. Like the early EMD FT locomotives, the Cow-calf sets were typically built as mated pairs, with the Cow (or cabbed unit) and calf (or cabless unit) sharing a number. However this was not always the case, with over time many of the sets being broken up and couplers added to aid with versatility.

Most cow-calf sets were built between the 1930s and the 1950s. They were built by several different makers, although General Motors' Electro-Motive Division built far more than the others. As originally constructed, the cow-calf units were typically used in hump yards where they spent much of their life pushing long trains over the hump for classification. There were, however, a few notable cases where this was not so, with some industrial railroads using non mated pairs as light road switcher locomotives. However as with the larger three unit Cow-calf sets, such was very rare.

The cow-calf concept was adopted on Queensland 2 ft gauge sugar cane railways with two locomotives being coupled permanently in multiple-unit mode with the cab of one removed. This was utilised by Isis Mill (1980-1993) and by Mackay Sugar (2005).

The concept was also used in the United Kingdom by British Rail to produce the unique Class 13 locomotives, composed of two Class 08 locomotives. British terminology is master-and-slave unit.

Cow-calf locomotives can be distinguished from the sometimes very similar looking slug and slug mother sets by the fact that both cows and calves are independently powered, while slugs are engineless, and dependent on power from their "mother" units.

List of cow-calf models

See also

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.