World Library  
Flag as Inappropriate
Email this Article

Electronics Manufacturing Services

Article Id: WHEBN0003058053
Reproduction Date:

Title: Electronics Manufacturing Services  
Author: World Heritage Encyclopedia
Language: English
Subject: Benchmark Electronics, Elcoteq, Electronics manufacturing in Chennai, Ucamco, Falco Electronics
Publisher: World Heritage Encyclopedia

Electronics Manufacturing Services

Electronic manufacturing services (EMS) is a term used for companies that test, manufacture, distribute, and provide return/repair services for electronic components and assemblies for original equipment manufacturers (OEMs). The concept is also referred to as electronic contract manufacturing (ECM).[1]


SCI (then Space Craft Inc.; now Sanmina-SCI) is generally credited for being the first major EMS / contract assembly company in North America.[2]

The EMS industry took off after the late 1970s when Solectron was established. At the time, most electronics manufacturing for large-scale product runs was handled by in-house assembly. These new companies offered flexibility and eased human resources issues for smaller companies doing limited runs. The business model for the EMS industry is to specialize in large economies of scale in manufacturing, raw materials procurement and pooling together resources, industrial design expertises as well as create added value services such as warranty and repairs. This frees up the customer who does not need to manufacture and keep huge inventories of products. Therefore they can respond to sudden spikes in demand more quickly and efficiently.[3]

The development of Surface Mount Technology (SMT) on printed circuit boards (PCB) allowed for the rapid assembly of electronics. The early 1990s saw OEM's rapidly installing SMT lines. EMS players like SCI and Avex struggled to exist as OEMs would pull contract or change vendors constantly. By the mid-1990s the advantages of the EMS concept became compelling and OEMs began outsourcing pcb assembly (PCBA) in large scale. By the end of the 1990s and early 2000s many OEMs sold their assembly plants to EMS aggressively vying for market share. A wave of consolidation followed, as the more cash-flush firms were able to buy up quickly both existing plants as well as smaller EMS companies.

Market segments

Electronic Circuit Board Assembly

The EMS industry is commonly divided into Tiers by their revenue:

  • Tier 1: >$800m/1Billion
  • Tier 2: $250/300m to $1B
  • Tier 3: <$250m

There is no hard rule on the actual revenue designation at this time. Other categories have been suggested by StepBeyond/EMSinsider: Tier 4 <10m and "Tier Mega" referring to the Big 2, Foxconn and Flextronics.

Another distinction is drawn between EMS that specialize in High Mix Low Volume (HMLV) and High Volume Low Mix (HVLM). Mix refers generally to the complexity or different models of the PCB assembly. Volume refers the number of units built, with products like consumer electronics on the high end and prototype, medical electronics or machinery on the low end. Typically, lower Tier EMS provide HMLV and higher Tier provide HVLM.

During technology's late-1990s heyday, EMS players routinely acquired assets in high-cost locations. EMS players largely focused on printed circuit board fabrication, leaving system assembly to the OEMs. EMS companies largely disdained industries outside the world of information processing (computers) and communications. In recent years, EMS players have shifted production to low-cost geographies; embraced non-traditional industries including consumer electronics, industrial, medical and instrumentation; and added substantial vertical capabilities, stretching from design and ODM through system assembly, test, delivery and logistics, warranty and repair, network services, software and silicon design, and customer service.

EMS have also started to provide design services used in conceptual product development advice and mechanical, electrical and software design assistance. Testing services perform in-circuit, functional, environmental, agency compliance, and analytical laboratory testing. Electronic manufacturing services are located throughout the world. They vary in terms of production capabilities and comply with various quality standards and regulatory requirements.


  1. ^ Boy Lüthje, "Electronics contract manufacturing: Global production and the international division of labor in the age of the Internet", Industry and Innovation, vol. 9, iss. 3, pp. 227-247, 2002.
  2. ^
  3. ^ [1]
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.