World Library  
Flag as Inappropriate
Email this Article

Fresnel zone

Article Id: WHEBN0000041196
Reproduction Date:

Title: Fresnel zone  
Author: World Heritage Encyclopedia
Language: English
Subject: Fresnel diffraction, Diffraction, Picket-fencing, Motorola Canopy, Cell site
Publisher: World Heritage Encyclopedia

Fresnel zone

Fresnel zone: D is the distance between the transmitter and the receiver; r is the radius of the first Fresnel zone (n=1) at point P. P is d1 away from the transmitter, and d2 away from the receiver.

In optics and radio communications (indeed, in any situation involving the radiation of waves, which includes electrodynamics, acoustics, gravitational radiation and seismology), a Fresnel zone ( ), named for physicist Augustin-Jean Fresnel, is one of a (theoretically infinite) number of concentric ellipsoids which define volumes in the radiation pattern of a (usually) circular aperture. Fresnel zones result from diffraction by the circular aperture.[1] The cross section of the first (innermost) Fresnel zone is circular. Subsequent Fresnel zones are annular (doughnut-shaped) in cross section, and concentric with the first.


  • Importance of Fresnel zones 1
  • Determining Fresnel zone clearance 2
  • See also 3
  • References 4
  • External links 5

Importance of Fresnel zones

If unobstructed, radio waves will travel in a straight line from the transmitter to the receiver. But if there are reflective surfaces along the path, such as bodies of water or smooth terrain, the radio waves reflecting off those surfaces may arrive either out of phase or in phase with the signals that travel directly to the receiver. Waves that reflect off of surfaces within an even Fresnel zone are out of phase with the direct-path wave and reduce the power of the received signal. Waves that reflect off of surfaces within an odd Fresnel zone are in phase with the direct-path wave and can enhance the power of the received signal. Sometimes this results in the counter-intuitive finding that reducing the height of an antenna increases the signal-to-noise ratio.

Fresnel provided a means to calculate where the zones are--where a given obstacle will cause mostly in phase or mostly out of phase reflections between the transmitter and the receiver. Obstacles in the first Fresnel zone will create signals with a path-length phase shift of 0 to 180 degrees, in the second zone they will be 180 to 360 degrees out of phase, and so on. Even numbered zones have the maximum phase cancelling effect and odd numbered zones may actually add to the signal power.[2]

To maximize receiver strength, one needs to minimize the effect of obstruction loss by removing obstacles from the radio frequency line of sight (RF LoS). The strongest signals are on the direct line between transmitter and receiver and always lie in the first Fresnel zone.

Determining Fresnel zone clearance

Several examples of how the Fresnel zone can be disrupted.

The concept of Fresnel zone clearance may be used to analyze interference by obstacles near the path of a radio beam. The first zone must be kept largely free from obstructions to avoid interfering with the radio reception. However, some obstruction of the Fresnel zones can often be tolerated. As a rule of thumb the maximum obstruction allowable is 40%, but the recommended obstruction is 20% or less.

For establishing Fresnel zones, first determine the RF Line of Sight (RF LoS), which in simple terms is a straight line between the transmitting and receiving antennas. Now the zone surrounding the RF LoS is said to be the Fresnel zone.[3]

The general equation for calculating the Fresnel zone radius at any point P in between the endpoints of the link is the following:

F_n = \sqrt{\frac{n \lambda d_1 d_2}{d_1 + d_2}}


Fn = The nth Fresnel Zone radius in metres

d1 = The distance of P from one end in metres

d2 = The distance of P from the other end in metres

\lambda = The wavelength of the transmitted signal in metres

The cross sectional radius of each Fresnel zone is the longest at the midpoint of the RF LoS, shrinking to a point at the antenna on each end. For practical applications, it is often useful to know the maximum radius of the first Fresnel zone. From the above formula, the following formulas can be derived, using d_1 = d_2, D = d_1 + d_2, and \lambda = \frac{c}{f}. Now we have an easy way to calculate the radius of the first Fresnel zone (F1 in the above equation), knowing the distance between the two antennas and the frequency of the transmitted signal.

In SI:

r = 8.657 \sqrt{{D} \over f}
  • r = radius in metres
  • D = total distance in kilometres
  • f = frequency transmitted in gigahertz.

Or in imperial units:

r = 36.03 \sqrt{{D} \over f}
  • r = radius in feet
  • D = total distance in miles
  • f = frequency transmitted in Gigahertz.

See also


  1. ^ "Fresnel zone". Retrieved 2008-02-21. 
  2. ^ "Wireless – Fresnel Zones and their Effect". Retrieved 2008-02-21. 
  3. ^ "Fresnel Zone Clearance". Retrieved 2008-02-21. 

External links

  • Fresnel Zone Calculator and Elevation Chart
  • Fresnel Zone Calculator
  • FEN Fresnel Zone Calculator
  • More Fresnel Zone Details
  • R.E. Sherriff, Understanding the Fresnel zone
  • VHF/UHF/Microwave Radio Propagation: A Primer for Digital Experimenters
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.