World Library  
Flag as Inappropriate
Email this Article

PCI Mezzanine Card

Article Id: WHEBN0000231933
Reproduction Date:

Title: PCI Mezzanine Card  
Author: World Heritage Encyclopedia
Language: English
Subject: Spectrum Signal Processing by Vecima, Mezzanine (disambiguation), VPX, Eurotech (company), PCI Express
Publisher: World Heritage Encyclopedia

PCI Mezzanine Card

A PCI Mezzanine Card or PMC is a printed circuit board manufactured to the IEEE P1386.1 standard. This standard combines the electrical characteristics of the PCI bus with the mechanical dimensions of the Common Mezzanine Card or CMC format (IEEE 1386 standard).

A mezzanine connector connects two parallel printed circuit boards in a stacking configuration. Many mezzanine connector styles are commercially available for this purpose, however PMC mezzanine applications usually use the 1.0 mm pitch 64 pin connector described in IEEE 1386.

A PMC can have up to four 64-pin bus connectors. The first two ("P1" and "P2") are used for 32 bit PCI signals, a third ("P3") is needed for 64 bit PCI signals. An additional bus connector ("P4") can be used for non-specified I/O signals. In addition, arbitrary connectors can be supplied on the front panel, or "bezel".

The PMC standard defines which connector pins are used for which PCI signals; in addition it defines the optional 64 "P4" connector pins for use of arbitrary I/O signals.

It enables manufacturers to offer products that are compatible with the well-established PCI bus, but in a smaller and more robust package than standard PCI plug-in cards. The word mezzanine, meaning a platform inserted between two floors of a building, describes the way in which a PMC card fits between two adjacent host cards in a standard card rack, attached to one of the cards by connectors and mounting pillars. A single PMC measures 74 mm x 149 mm. The standard also defines a double-sized card, but this is rarely used.

Carrier cards that accept PMCs are usually made in the Eurocard format, which includes single, double and triple-height VMEbus cards, CompactPCI (cPCI) cards and more recently, VPX cards. One PMC fits on a standard 3U carrier card while 6U models (typical for VMEbus cards) can carry up to two PMCs. PMCs were also used in early ATCA systems prior to the advent of the Advanced Mezzanine Card or AMC.

For the PMC standard, I/O technologies account for much of the market, but various card functions are commercially available including Intel architecture and PowerPC processors, graphics cards, and memory cards. I/O cards are available such as serial communication controllers, SCSI controllers, graphics controllers and FireWire controllers.


Additional standards exist that define variants of the standard PMC. For example,

  • PMC-X (PCI-X PMC) defined by the VITA 39 standard
  • PPMC (aka PrPMC; processor PMC) defined by the VITA 32 standard. I.e. for allowing processors to have host or monarch, support on a PMC. Additional signaling is defined so that the PrPMC can work as the host processor on a PCI bus. The intention is to allow a monarch PMC to control the PCI bus. This is usually a requirement if the PMC is to act as a host processor module.
  • CCPMC (conduction-cooled PMC) defined by the VITA 20 standard
  • XMC, or Switched Mezzanine Card, (PMC with high-speed serial fabric interconnect) defined by the VITA 42 standard. XMC specifies a fifth connector ("P15") that supports PCI Express (VITA 42.3) or other high speed serial formats such as Serial RapidIO (VITA 42.2) and Parallel RapidIO (VITA 42.1).
  • FMC – FPGA Mezzanine Card provides a standard mezzanine form factor that offers a flexible, modular I/O interface to an FPGA located on a host system baseboard or carrier card. For an overview read: Introducing the FPGA Mezzanine Card: Emerging VITA 57 (FMC) standard brings modularity to FPGA designs. VITA 57 defines both convection- and conduction-cooled FMC form factors.

External links

  • What is PMC?
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.