World Library  
Flag as Inappropriate
Email this Article

Plan for Establishing Uniformity in the Coinage, Weights, and Measures of the United States


Plan for Establishing Uniformity in the Coinage, Weights, and Measures of the United States

The "Plan for Establishing Uniformity in the Coinage, Weights, and Measures of the United States" was a report submitted to the U.S. House of Representatives on July 13, 1790, by Secretary of State Thomas Jefferson.

At the

  • Plan for Establishing Uniformity in the Coinage, Weights, and Measures of the United States
  • A metrication timeline that places the work of Thomas Jefferson in context

External links

  • The Writings of Thomas Jefferson, Monticello Edition, Washington, D.C.: The Thomas Jefferson Memorial Association, 1904, Vol. 3 pp. 26–59.


  1. ^ a b c d e Linklater, Andro (2003). Measuring America: How the United States Was Shaped by the Greatest Land Sale in History. Plume. pp. 103–142.  
  2. ^ Journals of the Continental Congress, Wednesday, July 6, 1785
  3. ^ The American Presidency Project, George Washington: First Annual Message, accessed October 13, 2006
  4. ^ The American Presidency Project, George Washington: Second Annual Message, accessed October 13, 2006
  5. ^ The American Presidency Project, George Washington: Third Annual Message, accessed October 13, 2006


See also

The Senate continued to consider Jefferson's two proposals, along with a number of new proposals, for several years. In 1795 a bill titled "An Act directing certain experiments to be made to ascertain uniform standards of weights and measures for the United States" was passed by the House and was approved by committee in the Senate, but on the last day of the session the Senate said it would consider the bill during the next session. The bill was never taken up again. In 1795 the Northwest Indian War, which for years had prevented the surveying and sale of land in the Northwest Territory came to an end. A land rush of settlers, surveyors, squatters, and others rapidly pushed into the region and the federal government had a sudden and intense need to establish a method for surveying and selling land. On May 18, 1796 Congress passed "an Act for the sale of land of the United States in the territory northwest of the River Ohio, and above the mouth of the Kentucky River". This law defined a survey grid system of 6–mile–square townships divided into 1–mile–square sections, with the defining unit being the chain, specifically Gunter's chain. This was the first unit of measurement designated into law by Congress. This law and the way it defined the survey grid ended debate over Jefferson's decimal system.[1]

Washington repeated similar calls for action in his second[4] and third[5] annual messages (after Jefferson's report). Jefferson's decimal proposal had the support of Robert Morris was a powerful opponent of the proposal.[1] In late 1791 the Senate appointed a committee to report on the subject and make recommendations. The committee reported in April 1792, unanimously endorsing Jefferson's decimal system. The Senate was slow to act on the matter and while they delayed events in France complicated the issue. Although French scientists working on a decimal system had originally supported using the seconds pendulum as a scientific basis, and Jefferson had deliberately matched his seconds pendulum proposal to the French one, based on a measurement at the latitude of Paris, the French decided to use the length of a meridian of the Earth instead of a seconds pendulum. This and other developments changed what had promised to be an internationally developed system into a strictly French project. Jefferson wrote, "The element of measure adopted by the National Assembly excludes, ipso facto, every nation on earth from a communion of measurement with them."[1]

Under the [3]

Subsequent developments

Ounce - 36.43 g or 26.54 g (for comparison, a modern US ounce is 28.3495231 g)

Bushel - 36.43 L or 26.54 L (for comparison, a modern US bushel is 35.239072 L)

Foot - 331.4 mm or 298.3 mm (for comparison, the modern US foot is 304.8mm)

Depending on exactly which definition of the foot was to have been used, the actual values of the base units would have been:

The original document gives the value of a kental as 16 stones at one point and 10 stones in another point in the document. 10 was presumably the intended value, given the otherwise consistent decimalization.

Jeffersonian decimal proposal
point = 1/10 line
line = 1/10 inch
inch = 1/10 foot
foot (base) (either 1/3 or 3/10 of ca. 994,4 mm)
decad(e) = 10 foot
rood = 10 decade
furlong = 10 rood
mile = 10 furlong (ca. 2 traditional miles)
rood = 1 rood × 1 rood
metre = 1/10 demi-pint = 1 inch³
demi-pint = 1/10 pottle = 2 × 2 × 2½ inch³
pottle = 1/10 bushel = 5 × 5 × 4 inch³
bushel = 1 foot³ (ca ¾ traditional bushel)
quarter = 10 bushels
last, double ton = 10 quarters
mite = 1/10 minim
minim, demi-grain = 1/10 carat
carat = 1/10 double-scruple
double-scruple = 1/10 ounce
ounce = 1/1000 the weight of 1 bushel of water
pound = 10 ounces (about 6/10 old pound)
stone = 10 pounds
kental = 10 (or 16) stones
hogshead = 10 kentals

In distinguishing this from the less radical changes proposed in the first alternative, the report stated:

The revolutionary system was quite similar to the metric system, except the difference of about 5.5 mm between the second pendulum at 45° and the 10,000th part of the distance from the north pole to the equator, which became the first definition of the metre. Also it didn't have the concept of prefixes. A very similar system was a base of discussion in France after the revolution of July 14, 1789, with Jefferson observing.

Decimal system based on the foot

Jeffersonian traditional proposal
foot = 12 inches
yard = 3 feet
ell = 3¾ feet
fathom = 6 feet
perch, pole = 5½ yards
furlong = 40 poles
mile = 8 furlongs
league = 3 miles
rood = 40 square poles
acre = 4 roods
gill = ¼ pint
pint = ½ quart
quart = ½ pottle
pottle = ½ gallon
gallon = 270 cubic inches
peck = 2 gallons
bushel, firkin = 4 pecks
strike, kilderkin = 2 bushel or firkin
coomb, barrel = 2 strikes or kilderkins
quarter, hogshead = 2 coombs or barrels
tierce = 4/3 hogshead
pipe, butt, puncheon = 2 hogsheads
ton = 2 pipes
grain = 1/24 pennyweight
pennyweight = 1/18 ounce
ounce = 1/1000 weight of 1 cubic foot of rain water at standard temperature
pound = 16 ounces

In the evolutionary approach, the foot was to be derived from one of these lengths by a simple integer factor, which would be either three (pendulum) or five (rod), i.e. lengthening it from the traditional value by 1.04970¯6 inches to ca. 331.463 mm or shortening it by 0.255264 inches to ca. 298.317 mm. For practical purposes he wanted the rod to be 58¾ (new) inches long, an increase of less than 0.045%.

More traditional proposal

In coordination with scientists in France, Jefferson selected the seconds pendulum at 45° latitude as the basic reference. For technical reasons, he proposed using a uniform rod as the pendulum rather than a traditional pendulum. The pendulum was estimated to be 39.14912 English inches long (in the inches of that time—it wasn't until much later that the inch was defined to be 25.4 mm), or 1.5 times that for a vibrating rod (58.72368 inches).

The seconds pendulum basis


  • The seconds pendulum basis 1
  • More traditional proposal 2
  • Decimal system based on the foot 3
  • Subsequent developments 4
  • See also 5
  • Notes 6
  • References 7
  • External links 8

The decimal dollar had already been agreed upon in principle in 1785,[2] but would not be implemented until after passage of the Mint Act in 1792. In mid-1790 Jefferson proposed two systems of units, one evolutionary with a mere refinement of definitions and simplification of the existing English system, the other one revolutionary being decimal and only reusing some of the traditional names. Jefferson's proposal was the world's first scientifically based, fully integrated, decimal system of weights and measures.[1]


This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.