World Library  
Flag as Inappropriate
Email this Article

Acetone peroxide

Article Id: WHEBN0000578412
Reproduction Date:

Title: Acetone peroxide  
Author: World Heritage Encyclopedia
Language: English
Subject: Richard Wolffenstein (chemist), Najibullah Zazi, Peroxide, TCAP, Acetone (disambiguation)
Collection: Explosive Chemicals, Ketals, Organic Peroxides, Oxygen Heterocycles, Radical Initiators
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Acetone peroxide

Acetone peroxide
Acetone peroxide trimer
Names
IUPAC names
3,3-Dimethyl-1,2-dioxacyclopropane
(monomer)
3,3,6,6-Tetramethyl-1,2,4,5-tetraoxane
(dimer)
3,3,6,6,9,9-Hexamethyl-1,2,4,
5,7,8-hexaoxacyclononane
(trimer)
3,3,6,6,9,9,12,12-Octamethyl-1,2,4,
5,7,8,10,11-octaoxacyclododecane
(tetramer)
Other names
Triacetone Triperoxide
Peroxyacetone
Mother of Satan
Identifiers
 N
ChemSpider  Y
Jmol-3D images Image

dimer
Image trimer

PubChem
Properties
C6H12O4 (dimer)
C9H18O6 (trimer)
C12H24O8 (tetramer)
Molar mass 148.157 g/mol (dimer)
222.24 g/mol (trimer)
Appearance White crystalline solid
Melting point 91 °C (196 °F; 364 K)
Boiling point 97 to 160 °C (207 to 320 °F; 370 to 433 K)
insoluble
Hazards
Main hazards Explosive
Explosive data
Shock sensitivity High / moderate when wet
Friction sensitivity High / moderate when wet
Detonation velocity 5300 m/s
17,384 ft/s
3.29 miles per second
RE factor 0.83
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
 N  (: Y/N?)

Acetone peroxide (triacetone triperoxide, peroxyacetone, TATP, TCAP) is an primary high explosive. It takes the form of a white crystalline powder with a distinctive bleach-like odor.

It is susceptible to heat, friction and shock. The instability is greatly altered by impurities, including its own oligomers. It is not easily soluble in water.

Contents

  • History 1
  • Chemistry 2
  • Industrial occurrence 3
  • Accidental byproduct 4
  • Use in improvised explosive devices 5
  • References 6
  • External links 7

History

Acetone peroxide was discovered in 1895 by Vogel.

Chemistry

"Acetone peroxide" most commonly refers to the cyclic trimer TCAP (tri-cyclic acetone peroxide, or tri-cyclo, C9H18O6) obtained by a reaction between hydrogen peroxide and acetone in an acid-catalyzed nucleophilic addition:[5]

The dimer (C6H12O4) and open monomer are also formed, but under proper conditions the cyclic trimer is the primary product. A tetrameric form was also described.[6]

In mildly acidic or neutral conditions, the reaction is much slower and produces more angle strain of the chemical bonds in the dimer and especially the monomer, they are even more unstable than the trimer.[7]

At room temperature, the trimeric form slowly sublimes, reforming as larger crystals of the same peroxide.

Acetone peroxide is one of the few high explosives not containing nitrogen. This is one reason it has become popular with terrorists,[8] as it can pass through scanners designed to detect nitrogenous explosives.[9]

TCAP generally burns when ignited, unconfined, in quantities less than about 4 grams. More than 4 grams will usually detonate when ignited; smaller quantities might detonate when even slightly confined. Completely dry TCAP is much more prone to detonation than the fresh product still wetted with water or acetone. The oxidation that occurs when burning is:

2 C
9
H
18
O
6
+ 21 O
2
→ 18 H
2
O
+ 18 CO
2

Theoretical examination of the explosive entropic explosion.[10]

The high sensitivity to shock, heat and friction are due to the instability of the molecule. Big crystals, found in older mixtures, are more dangerous, as they are easier to shatter—and initiate—than small ones.

Synthesis of tri-cyclic acetone peroxide.

Due to the low cost and ease with which the precursors can be obtained, acetone peroxide can be manufactured by those without the resources needed to manufacture or buy more sophisticated explosives. When the reaction is carried out without proper equipment the risk of an accident is significant.

There is a common myth that the only "safe" acetone peroxide is the trimer, made at low temperatures:

The mixture must be kept below 10 degrees Celsius. If the crystals form at this temperature, it forms the isomer called tricycloacetone peroxide, which is relatively stable and safe to handle. If the crystals form above this temperature, the dimeric form, called dicycloacetone peroxide. This isomer is much more unstable, and could go off at the touch, making it not safe enough to be considered a practical explosive. As long as the temperature is kept below 10 degrees Celsius, then there is little to worry about.[11]

The trimer is the more stable form, but is not much more so than the dimer. All forms of acetone peroxide are sensitive to initiation. Organic peroxides are sensitive, dangerous explosives; due to their sensitivity they are rarely used by well funded militaries. Even for those who synthesize explosives as a hobby there are far safer explosives with syntheses nearly as simple as that of acetone peroxide.

Acetone peroxide is commonly combined with nitrocellulose by dissolving the nitrocellulose in acetone and then mixing in the acetone peroxide and letting it dry, which results in a mixture that is both more stable and somewhat more powerful than acetone peroxide by itself. This mixture is commonly referred to as APNC.

Tetrameric acetone peroxide is more chemically stable (heating to 120 °C for 4 hours), although it is still a very dangerous primary explosive. It can be prepared using tin(IV) chloride (without acid present) as a catalyst with up to 40% yield if a radical inhibitor such as hydroquinone, or a chelator such as EDTA is added.[6]

Tetrameric acetone peroxide

Acetone peroxide evaporates 6.5% in 24 hours at 14–18 °C. In open air at 25 °C it has a loss by sublimation of 68.6% in 14 days.[12] Many accidents have resulted from the fact that acetone peroxide detonates due to sublimation. Keeping it wet stops the sublimation and can prevent this type of accident.

Industrial occurrence

Acetone peroxides are common and unwanted by-products of oxidation reactions, such as those used in phenol syntheses. Due to their explosivity, they are hazardous. Numerous methods are used to reduce their production—shifting the pH to more alkaline, adjusting the reaction temperature, or adding a soluble copper(II) compound.[13]

Acetone peroxide and benzoyl peroxide are used as flour bleaching agents to bleach and "mature" flour.[14]

Ketone peroxides, including acetone peroxide, methyl ethyl ketone peroxide, and benzoyl peroxide, find applications as initiators for polymerization reactions of e.g. silicone or polyester resins, often encountered when making fiberglass-reinforced composites. For these uses, the peroxides are typically in the form of a dilute solution in an organic solvent, though even commercial products with higher concentrations of organic peroxides can form crystals around the lid when older, making the can shock-sensitive. Methyl ethyl ketone is more common for this purpose, as it is stable in storage.

Accidental byproduct

Acetone peroxide can also occur accidentally, when suitable chemicals are mixed. For example, when methyl ethyl ketone peroxide is mixed with acetone while making fiberglass composites, and left to stand for some time, or when a mixture of peroxide and hydrochloric acid from printed circuit board etching is mixed with waste acetone from cleaning the finished board and allowed to stand. While amounts obtained this way are typically much smaller than from intentional production, they are also less pure and prepared without cooling, and hence very unstable.

It is also a hazardous by-product of isosafrole oxidation in acetone, a step in the synthesis of MDMA.

Use in improvised explosive devices

TATP has been used in bomb and suicide attacks and in improvised explosive devices, including in Israel and the London bombings on 7 July 2005, in which four suicide bombers killed 52 people and injured more than 700.[15][16][17] Due to its high susceptibility to accidental detonation by shock, friction, or sparks, acetone peroxide has earned the nickname "Mother of Satan".[8] Several methods can be used for trace analysis of TATP,[18] including gas chromatography/mass spectrometry (GC/MS)[19][20][21][22][23] and high performance liquid chromatography/mass spectrometry (HPLC/MS).[24][25][26][27][28]

References

  1. ^ Wolffenstein, R (1895). "Über die Einwirkung von Wasserstoffsuperoxyd auf Aceton und Mesityloxyd (On the effect of hydrogen peroxide on acetone and mesityl oxide)". Berichte der Deutschen chemischen Gesellschaft 28 (2): 2265–2269.  
  2. ^ Wolffenstein, Richard (1895) Deutsches Reich Patent 84,953.
  3. ^ Baeyer, Adolf; Villiger, Victor (1900). "Über die Einwirkung des Caro'schen Reagens auf Ketone" [On the effect of Caro's reagent on ketones]. Berichte der deutschen chemischen Gesellschaft 33 (1): 858–864.  
  4. ^ Milas N. A., Golubović A. (1959). "Studies in Organic Peroxides. XXVI. Organic Peroxides Derived from Acetone and Hydrogen Peroxide".  
  5. ^ "Megalomania's Method of Making Acetone Peroxide". Megalomania's Controversial Chem Lab. 2004-01-31. 
  6. ^ a b Jiang H., Chu G., Gong H., Qiao Q. (1999). "Tin Chloride Catalysed Oxidation of Acetone with Hydrogen Peroxide to Tetrameric Acetone Peroxide".  
  7. ^ Schulte-Ladbeck, R.; Kolla, P.; Karst, U. (2003). "Trace Analysis of Peroxide-Based Explosives".  
  8. ^ a b Genuth, Iddo; Lucille Fresco-Cohen (2006-11-06). "TATP: Countering the Mother of Satan". The Future of Things. Retrieved 24 September 2009. The tremendous devastative force of TATP, together with the relative ease of making it, as well as the difficulty in detecting it, made TATP one of the weapons of choice for terrorists  |
  9. ^ "Feds are all wet on airport security". Star-Ledger (Newark, New Jersey). 2006-08-24. Retrieved 11 September 2009. At the moment, Watts said, the screening devices are set to detect nitrogen-based explosives, a category that doesn't include TATP 
  10. ^ a b Dubnikova, F.; Kosloff, R.; Almog, J.; Zeiri, Y.; Boese, R.; Itzhaky, H.; Alt, A. and Keinan, E. (2003). "Decomposition of Triacetone Triperoxide Is an Entropic Explosion" (PDF).  
  11. ^ "Detailed Description of the Synthesis of Acetone Peroxide". totse.com. Archived from the original on N/A. Retrieved 13 November 2012. 
  12. ^ Acetone peroxide / Explosive. Economypoint.org. Retrieved on 13 December 2010.
  13. ^ Costantini, Michel (1991-03-26) Destruction of acetone peroxide. United States Patent 5003109. Freepatentsonline.com. Retrieved on 2013-02-03.
  14. ^ Food additives list from. the codex alimentarius. Retrieved on 2013-02-03.
  15. ^ Naughton, Philippe (2005-07-15) TATP is suicide bombers' weapon of choice. Timesonline.co.uk.
  16. ^ Yuen-C, Tham (2011-07-16). "Fighting terror takes new thinking: DPM Teo".  
  17. ^ Nine radical activists held in ‘plot to detonate bombs’ as Hong Kong debates reform bill, SCMP, 15 June 2015
  18. ^ Schulte-Ladbeck R, Vogel M, Karst U. Recent methods for the determination of peroxide-based explosives. Anal. Bioanal. Chem. 386 (2006), pp. 559–565.
  19. ^ D. Muller, A. Levy, R. Shelef, S. Abramovich-Bar, D. Sonerfield, T. Tamiri, Improved method for the detection of TATP after explosion. J. Forensic Sci. 49 (2004), pp. 935-938.
  20. ^ A. Stambouli, A. El Bouri, T. Bouayoun, M.A. Belliman, Headspace GC/MS detection of TATP traces in post-explosion debris. Forensic Sci. Int. 146 (2004), pp. S191-S194.
  21. ^ J.C. Oxley, J.L. Smith, K. Shinde, J. Moran, Determination of the vapor density of triacetone triperoxide (TATP) using a gas chromatography headspace technique. Propellants Explos. Pyrotech. 30 (2005), pp.127-130.
  22. ^ M.E. Sigman, C.D. Clark, R. Fidler, C.L. Geiger, C.A. Clausen, Analysis of triacetone triperoxide by gas chromatography/mass spectrometry and gas chromatography/tandem mass spectrometry by electron and chemical ionization. Rapid Commun. Mass Sp. 20 (2006), pp. 2851-2857.
  23. ^ F.S. Romolo, L. Cassioli, S. Grossi, G. Cinelli, M.V. Russo, Surface-sampling and analysis of TATP by gas chromatography/mass spectrometry. Forensic Sci. Int. 224 (2013) 96–100.
  24. ^ L. Widmer, S. Watson, K. Schlater, A. Crowson, Development of an LC/MS method for the trace analysis of triacetone triperoxide. Analyst 127 (2002), pp. 1627-1632.
  25. ^ X. Xu, A. M. van de Craats, E. M. Kok, P. C. A. M. de Bruyn, Trace analysis of peroxide explosives by high performance liquid-chromatography-atmospheric pressure chemical ionization-mass spectrometry (HPLC-APCI-MS) for forensic applications. J. Forensic Sci. 49 (2004), pp. 1230-1236.
  26. ^ I. Cotte-Rodriguez, H. Hernández-Soto, H. Chen, R.G. Cooks, In situ trace detection of peroxide explosives by desorption electrospray ionization and desorption atmospheric pressure chemical ionization. Anal. Chem. 80 (2008), pp. 1512-1519.
  27. ^ M.E. Sigman, C.D. Clark, T. Caiano, R. Mullen, Analysis of triacetone triperoxide (TATP) and TATP synthetic intermediates by electrospray ionization mass spectrometry. Rapid Commun. Mass Sp. 22 (2008), pp. 84-90.
  28. ^ M.E. Sigman, C. D. Clark, K. Painter, C. Milton, E. Simatos, J. Frisch, Analysis of oligomeric peroxides in synthetic triacetone triperoxide samples by tandem mass spectrometry. Rapid Commun. Mass Sp. 23 (2009), pp. 349-356.

External links

  • ChemSub Online: Acetone peroxide – Triacetone triperoxide.
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.