World Library  
Flag as Inappropriate
Email this Article

Barlow lens

Article Id: WHEBN0002067262
Reproduction Date:

Title: Barlow lens  
Author: World Heritage Encyclopedia
Language: English
Subject: Aircraft spotting, Astrophotography, Peter Barlow (mathematician), Telephoto lens, Coma (optics), Eyepiece, Teleconverter, Barlow, Questar Corporation, George Dollond
Collection:
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Barlow lens

Cone of light behind a doublet object lens (A) without (red) and with (green) a Barlow lens (B)

The Barlow lens, named after Peter Barlow, is a diverging lens which, used in series with other optics in an optical system, increases the effective focal length of an optical system as perceived by all components that are after it in the system. The practical result is that inserting a Barlow lens magnifies the image. A real barlow lens is not a single glass element, because that would generate chromatic aberration, and spherical aberration if the lens is not an asphere. More common configurations use three or more elements, for achromatic correction or apochromatic correction and higher image quality.

Telescope use

A Qantas Boeing 747-400 overflying Starbeyevo, Moscow at 11,000m. The aircraft was photographed from the ground using a Canon 400D, a 1200mm telescope and 2x Barlow lens.

In its astronomical use, a Barlow lens may be placed immediately before an eyepiece to effectively decrease the eyepiece's focal length by the amount of the Barlow's divergence.[1] Since the magnification provided by a telescope and eyepiece is equal to the telescope's focal length divided by the eyepiece's focal length, this has the effect of increasing the magnification of the image.

Astronomical Barlow lenses are rated for the amount of magnification they induce. Most commonly, Barlow lenses are 2x or 3x but adjustable Barlows are also available. The power of an adjustable Barlow lens is changed by adding an extension tube between the Barlow and the eyepiece to increase the magnification.

The amount of magnification is one more than the distance between the Barlow lens and the eyepiece lens, when the distance is measured in units of the focal length of the Barlow lens. A standard Barlow lens is housed in a tube that is one Barlow focal-length long, so that a focusing lens inserted into the end of the tube will be separated from the Barlow lens at the other end by one Barlow focal-length, and hence produce a 2x magnification over and above what the eyepiece would have produced alone. If the length of a standard 2x Barlow lens' tube is doubled, the lenses are separated by 2 Barlow focal lengths and it becomes a 3x Barlow, if the tube length is tripled, the lenses are separated by 3 Barlow focal lengths and it becomes a 4x Barlow, and so on.

A common misconception is that higher magnification equates to a higher-quality image. However, in practice, the quality of the image generally depends on the quality of the optics (lenses) and viewing conditions, not on magnification.

Photography use

Teleconverters are variations on Barlow lens that have been adapted for photographic use.[2] It increases the effective focal length of a photographic lens it is attached to, making it a telephoto lens. A true telephoto lens uses a configuration similar to a Barlow lens to obtain a shorter tube length for a given focal length.

Microscope use

In microscopy the Barlow lens is used to increase working distance and decrease magnification. The lenses are "objective lenses" that are mounted in front of the microscope's last objective element. Standard lenses are 2× which decreases the working distance by half and increases the magnification, 0.75× which increases the working distance proportionally to the 0.75 and decreases the magnification similarly. A 0.5× would double the working distance and halve the magnification.

Gallery

See also

References

  1. ^ Hartshorn, C. R. (1953). "The Barlow Lens". In Ingalls, Albert G.. Amateur Telescope Making, Book Three. Scientific American. pp. 277–286. 
  2. ^ Sidney F. Ray, Scientific photography and applied imaging, page 492
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.