World Library  
Flag as Inappropriate
Email this Article

Density functional theory

Article Id: WHEBN0000209874
Reproduction Date:

Title: Density functional theory  
Author: World Heritage Encyclopedia
Language: English
Subject: Car–Parrinello molecular dynamics, Quantum chemistry composite methods, MADNESS, CP2K, Kohn–Sham equations
Collection: Density Functional Theory, Electronic Structure Methods, Physics Theorems
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Density functional theory

Density functional theory (DFT) is a computational quantum mechanical modelling method used in physics, chemistry and materials science to investigate the electronic structure (principally the ground state) of many-body systems, in particular atoms, molecules, and the condensed phases. Using this theory, the properties of a many-electron system can be determined by using functionals, i.e. functions of another function, which in this case is the spatially dependent electron density. Hence the name density functional theory comes from the use of functionals of the electron density. DFT is among the most popular and versatile methods available in condensed-matter physics, computational physics, and computational chemistry.

DFT has been very popular for calculations in solid-state physics since the 1970s. However, DFT was not considered accurate enough for calculations in quantum chemistry until the 1990s, when the approximations used in the theory were greatly refined to better model the exchange and correlation interactions. In many cases the results of DFT calculations for solid-state systems agree quite satisfactorily with experimental data. Computational costs are relatively low when compared to traditional methods, such as Hartree–Fock theory and its descendants based on the complex many-electron wavefunction.

Despite recent improvements, there are still difficulties in using density functional theory to properly describe intermolecular interactions (of critical importance to understanding chemical reactions), especially van der Waals forces (dispersion); charge transfer excitations; transition states, global potential energy surfaces, dopant interactions and some other strongly correlated systems; and in calculations of the band gap and ferromagnetism in semiconductors.[1] Its incomplete treatment of dispersion can adversely affect the accuracy of DFT (at least when used alone and uncorrected) in the treatment of systems which are dominated by dispersion (e.g. interacting noble gas atoms)[2] or where dispersion competes significantly with other effects (e.g. in biomolecules).[3] The development of new DFT methods designed to overcome this problem, by alterations to the functional and inclusion of additional terms to account for both core and valence electrons [4] or by the inclusion of additive terms,[5][6][7][8] is a current research topic.

Contents

  • Overview of method 1
  • Derivation and formalism 2
  • Approximations (exchange-correlation functionals) 3
  • Generalizations to include magnetic fields 4
  • Applications 5
  • Thomas–Fermi model 6
  • Hohenberg–Kohn theorems 7
  • Pseudo-potentials 8
  • Software supporting DFT 9
  • See also 10
  • Lists 11
  • References 12
  • Key papers 13
  • External links 14

Overview of method

Although density functional theory has its conceptual roots in the Thomas–Fermi model, DFT was put on a firm theoretical footing by the two Hohenberg–Kohn theorems (H–K).[9] The original H–K theorems held only for non-degenerate ground states in the absence of a magnetic field, although they have since been generalized to encompass these.[10][11]

The first H–K theorem demonstrates that the ground state properties of a many-electron system are uniquely determined by an electron density that depends on only 3 spatial coordinates. It lays the groundwork for reducing the many-body problem of N electrons with 3N spatial coordinates to 3 spatial coordinates, through the use of functionals of the electron density. This theorem can be extended to the time-dependent domain to develop time-dependent density functional theory (TDDFT), which can be used to describe excited states.

The second H–K theorem defines an energy functional for the system and proves that the correct ground state electron density minimizes this energy functional.

Within the framework of Kohn–Sham DFT (KS DFT), the intractable many-body problem of interacting electrons in a static external potential is reduced to a tractable problem of non-interacting electrons moving in an effective potential. The effective potential includes the external potential and the effects of the Coulomb interactions between the electrons, e.g., the exchange and correlation interactions. Modeling the latter two interactions becomes the difficulty within KS DFT. The simplest approximation is the local-density approximation (LDA), which is based upon exact exchange energy for a uniform electron gas, which can be obtained from the Thomas–Fermi model, and from fits to the correlation energy for a uniform electron gas. Non-interacting systems are relatively easy to solve as the wavefunction can be represented as a Slater determinant of orbitals. Further, the kinetic energy functional of such a system is known exactly. The exchange-correlation part of the total-energy functional remains unknown and must be approximated.

Another approach, less popular than KS DFT but arguably more closely related to the spirit of the original H-K theorems, is orbital-free density functional theory (OFDFT), in which approximate functionals are also used for the kinetic energy of the non-interacting system.

Derivation and formalism

As usual in many-body electronic structure calculations, the nuclei of the treated molecules or clusters are seen as fixed (the Born–Oppenheimer approximation), generating a static external potential V in which the electrons are moving. A stationary electronic state is then described by a wavefunction \Psi(\vec r_1,\dots,\vec r_N) satisfying the many-electron time-independent Schrödinger equation

\hat H \Psi = \left{=}\ n(\vec r).

Thus, one can solve the so-called Kohn–Sham equations of this auxiliary non-interacting system,

\left[-\frac{\hbar^2}{2m}\nabla^2+V_s(\vec r)\right] \phi_i(\vec r) = \epsilon_i \phi_i(\vec r)

which yields the orbitals \,\!\phi_i that reproduce the density n(\vec r) of the original many-body system

n(\vec r )\ \stackrel{\mathrm{def}}{=}\ n_s(\vec r)= \sum_i^N \left|\phi_i(\vec r)\right|^2.

The effective single-particle potential can be written in more detail as

V_s(\vec r) = V(\vec r) + \int \frac{e^2n_s(\vec r\,')}{|\vec r-\vec r\,'|} {\rm d}^3r' + V_{\rm XC}[n_s(\vec r)]

where the second term denotes the so-called Hartree term describing the electron-electron Coulomb repulsion, while the last term \,\!V_{\rm XC} is called the exchange-correlation potential. Here, \,\!V_{\rm XC} includes all the many-particle interactions. Since the Hartree term and \,\!V_{\rm XC} depend on n(\vec r ), which depends on the \,\!\phi_i, which in turn depend on \,\!V_s, the problem of solving the Kohn–Sham equation has to be done in a self-consistent (i.e., iterative) way. Usually one starts with an initial guess for n(\vec r), then calculates the corresponding \,\!V_s and solves the Kohn–Sham equations for the \,\!\phi_i. From these one calculates a new density and starts again. This procedure is then repeated until convergence is reached. A non-iterative approximate formulation called Harris functional DFT is an alternative approach to this.

NOTE1: The one-to-one correspondence between electron density and single-particle potential is not so smooth. It contains kinds of non-analytic structure. E_s[n] contains kinds of singularities, cuts and branches. This may indicate a limitation of our hope for representing exchange-correlation functional in a simple analytic form.

NOTE2: It is possible to extend the DFT idea to the case of Green function G instead of the density n. It is called as Luttinger-Ward functional (or kinds of similar functionals), written as E[G]. However,G is determined not as its minimum, but as its extremum. Thus we may have some theoretical and practical difficulties.

NOTE3: There is no one-to-one correspondence between one-body density matrix n({\vec r},{\vec r}') and the one-body potential V({\vec r},{\vec r}'). (Remember that all the eigenvalues of n({\vec r},{\vec r}') is unity). In other words, it ends up with a theory similar as the Hartree-Fock (or hybrid) theory.

Approximations (exchange-correlation functionals)

The major problem with DFT is that the exact functionals for exchange and correlation are not known except for the free electron gas. However, approximations exist which permit the calculation of certain physical quantities quite accurately. In physics the most widely used approximation is the local-density approximation (LDA), where the functional depends only on the density at the coordinate where the functional is evaluated:

E_{\rm XC}^{\rm LDA}[n]=\int\epsilon_{\rm XC}(n)n (\vec{r}) {\rm d}^3r.

The local spin-density approximation (LSDA) is a straightforward generalization of the LDA to include electron spin:

E_{\rm XC}^{\rm LSDA}[n_\uparrow,n_\downarrow]=\int\epsilon_{\rm XC}(n_\uparrow,n_\downarrow)n (\vec{r}){\rm d}^3r.

Highly accurate formulae for the exchange-correlation energy density \epsilon_{\rm XC}(n_\uparrow,n_\downarrow) have been constructed from quantum Monte Carlo simulations of jellium.[13]

Generalized gradient approximations[14][15][16] (GGA) are still local but also take into account the gradient of the density at the same coordinate:

E_{XC}^{\rm GGA}[n_\uparrow,n_\downarrow]=\int\epsilon_{XC}(n_\uparrow,n_\downarrow,\vec{\nabla}n_\uparrow,\vec{\nabla}n_\downarrow) n (\vec{r}) {\rm d}^3r.

Using the latter (GGA) very good results for molecular geometries and ground-state energies have been achieved.

Potentially more accurate than the GGA functionals are the meta-GGA functionals, a natural development after the GGA (generalized gradient approximation). Meta-GGA DFT functional in its original form includes the second derivative of the electron density (the Laplacian) whereas GGA includes only the density and its first derivative in the exchange-correlation potential.

Functionals of this type are, for example, TPSS and the Minnesota Functionals. These functionals include a further term in the expansion, depending on the density, the gradient of the density and the Laplacian (second derivative) of the density.

Difficulties in expressing the exchange part of the energy can be relieved by including a component of the exact exchange energy calculated from Hartree–Fock theory. Functionals of this type are known as hybrid functionals.

Generalizations to include magnetic fields

The DFT formalism described above breaks down, to various degrees, in the presence of a vector potential, i.e. a magnetic field. In such a situation, the one-to-one mapping between the ground-state electron density and wavefunction is lost. Generalizations to include the effects of magnetic fields have led to two different theories: current density functional theory (CDFT) and magnetic field density functional theory (BDFT). In both these theories, the functional used for the exchange and correlation must be generalized to include more than just the electron density. In current density functional theory, developed by Vignale and Rasolt,[11] the functionals become dependent on both the electron density and the paramagnetic current density. In magnetic field density functional theory, developed by Salsbury, Grayce and Harris,[17] the functionals depend on the electron density and the magnetic field, and the functional form can depend on the form of the magnetic field. In both of these theories it has been difficult to develop functionals beyond their equivalent to LDA, which are also readily implementable computationally. Recently an extension by Pan and Sahni [18] extended the Hohenberg-Kohn theorem for non constant magnetic fields using the density and the current density as fundamental variables.

Applications

C60 with isosurface of ground-state electron density as calculated with DFT.

In general, density functional theory finds increasingly broad application in the chemical and material sciences for the interpretation and prediction of complex system behavior at an atomic scale. Specifically, DFT computational methods are applied for the study of systems exhibiting high sensitivity to synthesis and processing parameters. In such systems, experimental studies are often encumbered by inconsistent results and non-equilibrium conditions. Examples of contemporary DFT applications include studying the effects of dopants on phase transformation behavior in oxides, magnetic behaviour in dilute magnetic semiconductor materials and the study of magnetic and electronic behavior in ferroelectrics and dilute magnetic semiconductors.[19][20]

In practice, Kohn–Sham theory can be applied in several distinct ways depending on what is being investigated. In solid state calculations, the local density approximations are still commonly used along with plane wave basis sets, as an electron gas approach is more appropriate for electrons delocalised through an infinite solid. In molecular calculations, however, more sophisticated functionals are needed, and a huge variety of exchange-correlation functionals have been developed for chemical applications. Some of these are inconsistent with the uniform electron gas approximation, however, they must reduce to LDA in the electron gas limit. Among physicists, probably the most widely used functional is the revised Perdew–Burke–Ernzerhof exchange model (a direct generalized-gradient parametrization of the free electron gas with no free parameters); however, this is not sufficiently calorimetrically accurate for gas-phase molecular calculations. In the chemistry community, one popular functional is known as BLYP (from the name Becke for the exchange part and Lee, Yang and Parr for the correlation part). Even more widely used is B3LYP which is a hybrid functional in which the exchange energy, in this case from Becke's exchange functional, is combined with the exact energy from Hartree–Fock theory. Along with the component exchange and correlation funсtionals, three parameters define the hybrid functional, specifying how much of the exact exchange is mixed in. The adjustable parameters in hybrid functionals are generally fitted to a 'training set' of molecules. Unfortunately, although the results obtained with these functionals are usually sufficiently accurate for most applications, there is no systematic way of improving them (in contrast to some of the traditional wavefunction-based methods like configuration interaction or coupled cluster theory). Hence in the current DFT approach it is not possible to estimate the error of the calculations without comparing them to other methods or experiments.

Thomas–Fermi model

The predecessor to density functional theory was the Thomas–Fermi model, developed independently by both Thomas and Fermi in 1927. They used a statistical model to approximate the distribution of electrons in an atom. The mathematical basis postulated that electrons are distributed uniformly in phase space with two electrons in every h^{3} of volume.[21] For each element of coordinate space volume d^{3}r we can fill out a sphere of momentum space up to the Fermi momentum p_f [22]

\frac43\pi p_f^3(\vec{r}).

Equating the number of electrons in coordinate space to that in phase space gives:

n(\vec{r})=\frac{8\pi}{3h^3}p_f^3(\vec{r}).

Solving for p_{f} and substituting into the classical kinetic energy formula then leads directly to a kinetic energy represented as a functional of the electron density:

t_{TF}[n] = \frac{p^2}{2m_e} \propto \frac{(n^\frac13)^2}{2m_e} \propto n^\frac23(\vec{r})
T_{TF}[n]= C_F \int n(\vec{r}) n^\frac23(\vec{r}) d^3r =C_F\int n^\frac53(\vec{r}) d^3r
where C_F=\frac{3h^2}{10m_e}\left(\frac{3}{8\pi}\right)^\frac23.

As such, they were able to calculate the energy of an atom using this kinetic energy functional combined with the classical expressions for the nuclear-electron and electron-electron interactions (which can both also be represented in terms of the electron density).

Although this was an important first step, the Thomas–Fermi equation's accuracy is limited because the resulting kinetic energy functional is only approximate, and because the method does not attempt to represent the exchange energy of an atom as a conclusion of the Pauli principle. An exchange energy functional was added by Dirac in 1928.

However, the Thomas–Fermi–Dirac theory remained rather inaccurate for most applications. The largest source of error was in the representation of the kinetic energy, followed by the errors in the exchange energy, and due to the complete neglect of electron correlation.

Teller (1962) showed that Thomas–Fermi theory cannot describe molecular bonding. This can be overcome by improving the kinetic energy functional.

The kinetic energy functional can be improved by adding the Weizsäcker (1935) correction:[23][24]

T_W[n]=\frac{\hbar^2}{8m}\int\frac{|\nabla n(\vec{r})|^2}{n(\vec{r})}d^3r.

Hohenberg–Kohn theorems

1.If two systems of electrons, one trapped in a potential v_1(\vec r) and the other in v_2(\vec r), have the same ground-state density n(\vec r) then necessarily v_1(\vec r)-v_2(\vec r) = const.

Corollary: the ground state density uniquely determines the potential and thus all properties of the system, including the many-body wave function. In particular, the "HK" functional, defined as F[n]=T[n]+U[n] is a universal functional of the density (not depending explicitly on the external potential).

2. For any positive integer N and potential v(\vec r), a density functional F[n] exists such that E_{(v,N)}[n] = F[n]+\int{v(\vec r)n(\vec r)d^3r} obtains its minimal value at the ground-state density of N electrons in the potential v(\vec r). The minimal value of E_{(v,N)}[n] is then the ground state energy of this system.

Pseudo-potentials

The many electron wavefunction with angular momentum l_., and pp_. and AE_. denote, respectively, the pseudo wave-function and the true (all-electron) wave-function. The index n in the true wave-functions denotes the valence level. The distance beyond which the true and the pseudo wave-functions are equal, rl_., is also l_.-dependent.

Software supporting DFT

DFT is supported by many Quantum chemistry and solid state physics software packages, often along with other methods.

See also

Lists

References

  1. ^
  2. ^
  3. ^
  4. ^
  5. ^
  6. ^
  7. ^
  8. ^
  9. ^ a b
  10. ^
  11. ^ a b
  12. ^
  13. ^
  14. ^
  15. ^
  16. ^
  17. ^
  18. ^
  19. ^
  20. ^
  21. ^ (Parr & Yang 1989, p. 47)
  22. ^
  23. ^
  24. ^ (Parr & Yang 1989, p. 127)

Key papers

External links

  • Walter Kohn, Nobel Laureate Freeview video interview with Walter on his work developing density functional theory by the Vega Science Trust.
  • Klaus Capelle, A bird's-eye view of density-functional theory
  • Walter Kohn, Nobel Lecture
  • Density functional theory on arxiv.org
  • FreeScience Library -> Density Functional Theory
  • Density Functional Theory – an introduction
  • Electron Density Functional Theory – Lecture Notes
  • Density Functional Theory through Legendre Transformationpdf
  • Kieron Burke : Book On DFT : " THE ABC OF DFT " http://dft.uci.edu/doc/g1.pdf
  • Modeling Materials Continuum, Atomistic and Multiscale Techniques, Book
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.