World Library  
Flag as Inappropriate
Email this Article

Diffusion of innovations


Diffusion of innovations

The diffusion of innovations according to Rogers. With successive groups of consumers adopting the new technology (shown in blue), its market share (yellow) will eventually reach the saturation level. In mathematics, the yellow curve is known as the logistic function. The curve is broken into sections of adopters.

Diffusion of innovations is a theory that seeks to explain how, why, and at what rate new ideas and technology spread through cultures. Everett Rogers, a professor of communication studies, popularized the theory in his book Diffusion of Innovations; the book was first published in 1962, and is now in its fifth edition (2003).[1] Rogers argues that diffusion is the process by which an innovation is communicated through certain channels over time among the participants in a social system. The origins of the diffusion of innovations theory are varied and span multiple disciplines. Rogers proposes that four main elements influence the spread of a new idea: the innovation itself, communication channels, time, and a social system. This process relies heavily on human capital. The innovation must be widely adopted in order to self-sustain. Within the rate of adoption, there is a point at which an innovation reaches critical mass. The categories of adopters are: innovators, early adopters, early majority, late majority, and laggards.[2] Diffusion manifests itself in different ways in various cultures and fields and is highly subject to the type of adopters and innovation-decision process.


  • History 1
  • Elements 2
    • Characteristics of innovations 2.1
    • Characteristics of individual adopters 2.2
    • Characteristics of organizations 2.3
  • Process 3
  • Decisions 4
  • Rate of adoption 5
    • Adoption strategies 5.1
    • Diffusion vs adoption 5.2
  • Adopter categories 6
  • Failed diffusion 7
  • Heterophily and communication channels 8
  • The role of social systems 9
    • Opinion leaders 9.1
    • Electronic communication social networks 9.2
    • Organizations 9.3
  • Extensions of the theory 10
    • Policy 10.1
    • Technology 10.2
  • Consequences of adoption 11
    • Public versus private 11.1
    • Benefits versus costs 11.2
  • Mathematical treatment 12
    • Complex Systems models 12.1
  • Criticism 13
  • See also 14
  • References 15
    • Notes 15.1
  • External links 16



  • The Diffusion Simulation Game, about adopting an innovation in education.
  • The Pencil Metaphor on diffusion of innovation.
  • Diffusion of Innovations, by Jon Roland, summarizing ideas in the field.
  • Diffusion of Innovations,Strategy and Innovations. The D.S.I Framework by Francisco Rodrigues Gomes, share research.

External links

  1. ^ a b
  2. ^ a b Rogers 1962, p. 150.
  3. ^
  4. ^
  5. ^ a b
  6. ^ a b c
  7. ^ a b
  8. ^
  9. ^ Pemberton, H. E. (1936) 'The Curve of Culture Diffusion Rate', American Sociological Review, 1 (4): 547–556.
  10. ^
  11. ^ a b Rogers 1962, p. 83.
  12. ^
  13. ^
  14. ^ Rogers 1983, p. 11.
  15. ^
  16. ^ Rogers 1983, p. 17.
  17. ^
  18. ^ Rogers 1983, p. 21, 23.
  19. ^
  20. ^ Rogers 1983, p. 24.
  21. ^
  22. ^ a b Rogers 1962.
  23. ^
  24. ^
  25. ^ a b
  26. ^
  27. ^
  28. ^
  29. ^
  30. ^
  31. ^
  32. ^
  33. ^
  34. ^
  35. ^
  36. ^ a b Rogers 1962, p. 79.
  37. ^
  38. ^ Rogers 1962, p. 134.
  39. ^
  40. ^ Rogers 1962, p. 282.
  41. ^ Rogers 1962, p. 283.
  42. ^
  43. ^
  44. ^
  45. ^
  46. ^ Rogers 1983, p. 18.
  47. ^
  48. ^ Rogers 1983, p. 19.
  49. ^
  50. ^
  51. ^
  52. ^
  53. ^ Rogers 1962, p. 219.
  54. ^
  55. ^ Economic policy making in evolutionary perspective, by Ulrich Witt, Max-Planck-Institute for Research into Economic Systems.
  56. ^
  57. ^
  58. ^
  59. ^ Rogers 2003, p. 403.
  60. ^
  61. ^
  62. ^
  63. ^
  64. ^
  65. ^
  66. ^
  67. ^
  68. ^
  69. ^
  70. ^
  71. ^
  72. ^
  73. ^ Rogers 2005, p. 470.
  74. ^ Wejnert 2002, p. 299.
  75. ^ a b Wejnert 2002, p. 301.
  76. ^
  77. ^ What Math Can Tell Us About Technology's Spread Through Cities.
  78. ^ How does innovation take hold in a community? Math modeling can provide clues
  79. ^
  80. ^
  81. ^
  82. ^
  83. ^
  84. ^
  85. ^
  86. ^ a b
  87. ^
  88. ^


  • David L. Loudon & Albert J. Della Bitta, Consumer Behaviour (fourth edition), 1993.
  • Diane Stone, ‘Learning Lessons and Transferring Policy Across Time, Space and Disciplines’, Politics, 19 (1) 1999: 51–59.
  • Diane Stone, ‘Non-Governmental Policy Transfer: The Strategies of Independent Policy Institutes’, Governance: An International Journal of Policy and Administration, 13 (1) 2000: 45–70.
  • Diane Stone, ‘Transfer Agents and Global Networks in the ‘Transnationalisation’ of Policy’, Journal of European Public Policy, 11(3) 2004: 545–66.


See also

Rogers placed the contributions and criticisms of diffusion research into four categories: pro-innovation bias, individual-blame bias, recall problem, and issues of equality. The pro-innovation bias, in particular, implies that all innovation is positive and that all innovations should be adopted.[1] Cultural traditions and beliefs can be consumed by another culture's through diffusion, which can impose significant costs on a group of people.[86] The one-way information flow, from sender to receiver, is another weakness of this theory. The message sender has a goal to persuade the receiver, and there is little to no reverse flow. The person implementing the change controls the direction and outcome of the campaign. In some cases, this is the best approach, but other cases require a more participatory approach.[87] In complex environments where the adopter is receiving information from many sources and is returning feedback to the sender, a one-way model is insufficient and multiple communication flows need to be examined.[88]

Diffusion is difficult to quantify because humans and human networks are complex. It is extremely difficult, if not impossible, to measure what exactly causes adoption of an innovation.[84] This is important, particularly in healthcare. Those encouraging adoption of health behaviors or new medical technologies need to be aware of the many forces acting on an individual and his or her decision to adopt a new behavior or technology. Diffusion theories can never account for all variables, and therefore might miss critical predictors of adoption.[85] This variety of variables has also led to inconsistent results in research, reducing heuristic value.[86]

Because there are more than four thousand articles across many disciplines published on Diffusion of Innovations, with a vast majority written after Rogers created a systematic theory, there have been few widely adopted changes to the theory.[7] Although each study applies the theory in slightly different ways, this lack of cohesion has left the theory stagnant and difficult to apply with consistency to new problems.[82][83]


In threshold models[79] the uptake of technologies is determined by the balance of two factors: the (perceived) usefulness (sometimes called utility) of the innovation to the individual as well as barriers to adoption, such as cost. The multiple parameters that influence decisions to adopt, both individual and socially motivated, can be represented by such models as a series of nodes and connections that represent real relationships. Borrowing from social network analysis, each node is an innovator, an adopter, or a potential adopter. Potential adopters have a threshold, which is a fraction of his neighbors who adopt the innovation that must be reached before he will adopt. Over time, each potential adopter views his neighbors and decides whether he should adopt based on the technologies they are using. When the effect of each individual node is analyzed along with its influence over the entire network, the expected level of adoption was seen to depend on the number of initial adopters and the network's structure and properties. Two factors emerge as important to successful spread of the innovation: the number of connections of nodes with their neighbors and the presence of a high degree of common connections in the network (quantified by the clustering coefficient). These models are particularly good at showing the impact of opinion leaders relative to others.[80] Computer models are often used to investigate this balance between the social aspects of diffusion and perceived intrinsic benefit to the individuals.[81]

Such models represent a system of individuals as nodes in a network (or graph). The interactions that link these individuals are represented by the edges of the network and can be based on the probability or strength of social connections. In the dynamics of such models, each node is assigned a current state, indicating whether or not the individual has adopted the innovation, and model equations describe the evolution of these states over time.[78]

Complex network models can also be used to investigate the spread of innovations among individuals connected to each other by a network of peer-to-peer influences, such as in a physical community or neighborhood.[77]

Complex Systems models

The diffusion of an innovation typically follows an S shaped curve which often resembles a logistic function. Mathematical programming models such as the S-D model apply the diffusion of innovations theory to real data problems.[76]

Mathematical treatment

Benefits of an innovation obviously are the positive consequences, while the costs are the negative. Costs may be monetary or nonmonetary, direct or indirect. Direct costs are usually related to financial uncertainty and the economic state of the actor. Indirect costs are more difficult to identify. An example would be the need to buy a new kind of pesticide to use innovative seeds. Indirect costs may also be social, such as social conflict caused by innovation.[75] Marketers are particularly interested in the diffusion process as it determines the success or failure of a new product. It is quite important for a marketer to understand the diffusion process so as to ensure proper management of the spread of a new product or service.

Benefits versus costs

Public consequences comprise the impact of an innovation on those other than the actor, while private consequences refer to the impact on the actor. Public consequences usually involve collective actors, such as countries, states, organizations or social movements. The results are usually concerned with issues of societal well-being. Private consequences usually involve individuals or small collective entities, such as a community. The innovations are usually concerned with the improvement of quality of life or the reform of organizational or social structures.[75]

Public versus private

In contrast Wejnert details two categories: public vs. private and benefits vs. costs.[74]

Both positive and negative outcomes are possible when an individual or organization chooses to adopt a particular innovation. Rogers states that this area needs further research because of the biased positive attitude that is associated with innovation.[73] Rogers lists three categories for consequences: desirable vs. undesirable, direct vs. indirect, and anticipated vs. unanticipated.

Consequences of adoption

Diffusion curves for infrastructure[72] reveal contrasts in the diffusion process of personal technologies versus infrastructure.

Diffusion of existing technologies has been measured using "S curves". These technologies include radio, television, VCR, cable, flush toilet, clothes washer, refrigerator, home ownership, air conditioning, dishwasher, electrified households, telephone, cordless phone, cellular phone, per capita airline miles, personal computer and the Internet. This data[71] can act as a predictor for future innovations.

Eveland evaluated diffusion from a phenomenological view, stating, “Technology is information, and exists only to the degree that people can put it into practice and use it to achieve values”[70]

Peres, Muller and Mahajan suggested that diffusion is "the process of the market penetration of new products and services that is driven by social influences, which include all interdependencies among consumers that affect various market players with or without their explicit knowledge".[69]


[68]. The reintroduction of regulations in the early 2000s also shows this learning process, which would fit under the stages of knowledge and decision, can be seen as lessons learned by following China's successful growth.Asian Tigers As a group of countries succeed with a set of policies, others follow, as exemplified by the deregulation and liberalization across the developing world after the successes of the [67] where researchers find that [65] or in channels of diffusion [64][63] but more recently interest has shifted towards mechanisms (emulation, learning and coercion)[62] The first interests with regards to policy diffusion were focused in time variation or state lottery adoption,

Diffusion of Innovations has been applied beyond its original domains. In the case of political science and administration, policy diffusion focuses on how institutional innovations are adopted by other institutions, at the local, state, or country level. An alternative term is 'policy transfer' where the focus is more on the agents of diffusion and the diffusion of policy knowledge, such as in the work of Diane Stone.[60] Specifically, policy transfer can be defined as "knowledge about how policies administrative arrangements, institutions, and ideas in one political setting (past or present) is used in the development of policies, administrative arrangements, institutions, and ideas in another political setting".[61]


Extensions of the theory

Innovations are often adopted by organizations through two types of innovation-decisions: collective innovation decisions and authority innovation decisions. The collective decision occurs when adoption is by consensus. The authority decision occurs by adoption among very few individuals with high positions of power within an organization.[59] Unlike the optional innovation decision process, these decision processes only occur within an organization or hierarchical group. Within an organization certain individuals are termed "champions" who stand behind an innovation and break through opposition. The champion plays a very similar role as the champion used within the efficiency business model Six Sigma. The process contains five stages that are slightly similar to the innovation-decision process that individuals undertake. These stages are: agenda-setting, matching, redefining/restructuring, clarifying and routinizing.


Recent research by Wear shows, that particularly in regional and rural areas, significantly more innovation takes place in communities which have stronger inter-personal networks.[58]

[57] Prior to the introduction of the Internet, it was argued that social networks had a crucial role in the diffusion of innovation particularly

Electronic communication social networks

Other research relating the concept to public choice theory finds that the hierarchy of influence for innovations need not, and likely does not, coincide with hierarchies of official, political, or economic status.[55] Elites are often not innovators, and innovations may have to be introduced by outsiders and propagated up a hierarchy to the top decision makers.

Research was done in the early 1950s at the University of Chicago attempting to assess the cost-effectiveness of broadcast advertising on the diffusion of new products and services.[54] The findings were that opinion leadership tended to be organized into a hierarchy within a society, with each level in the hierarchy having most influence over other members in the same level, and on those in the next level below it. The lowest levels were generally larger in numbers and tended to coincide with various demographic attributes that might be targeted by mass advertising. However, it found that direct word of mouth and example were far more influential than broadcast messages, which were only effective if they reinforced the direct influences. This led to the conclusion that advertising was best targeted, if possible, on those next in line to adopt, and not on those not yet reached by the chain of influence.

Opinion leaders have the most influence during the evaluation stage of the innovation-decision process and on late adopters.[53] In addition opinion leaders typically have greater exposure to the mass media, more cosmopolitan, greater contact with change agents, more social experience and exposure, higher socioeconomic status, and are more innovative than others.

Not all individuals exert an equal amount of influence over others. In this sense opinion leaders are influential in spreading either positive or negative information about an innovation. Rogers relies on the ideas of Katz & Lazarsfeld and the two-step flow theory in developing his ideas on the influence of opinion leaders.[52]

Opinion leaders

The role of social systems

Promotion of healthy behavior provides an example of the balance required of homophily and heterophily. People tend to be close to others of similar health status.[49] As a result, people with unhealthy behaviors like smoking and obesity are less likely to encounter information and behaviors that encourage good health. This presents a critical challenge for health communications, as ties between heterophilous people are relatively weaker, harder to create, and harder to maintain.[50] Developing heterophilous ties to unhealthy communities can increase the effectiveness of the diffusion of good health behaviors. Once one previously homophilous tie adopts the behavior or innovation, the other members of that group are more likely to adopt it, too.[51]

Lazarsfeld and Merton first called attention to the principles of homophily and its opposite, heterophily. Using their definition, Rogers defines homophily as "the degree to which pairs of individuals who interact are similar in certain attributes, such as beliefs, education, social status, and the like".[46] When given the choice, individuals usually choose to interact with someone similar to themselves. Homophilous individuals engage in more effective communication because their similarities lead to greater knowledge gain as well as attitude or behavior change. As a result, homophilous people tend to promote diffusion among each other.[47] However, diffusion requires a certain degree of heterophily to introduce new ideas into a relationship; if two individuals are identical, no diffusion occurs because there is no new information to exchange. Therefore, an ideal situation would involve potential adopters who are homophilous in every way, except in knowledge of the innovation.[48]

Heterophily and communication channels

For example, Rogers discussed a situation in Peru involving the implementation of boiling drinking water to improve health and wellness levels in the village of Los Molinas. The residents had no knowledge of the link between sanitation and illness. The campaign worked with the villagers to try to teach them to boil water, burn their garbage, install latrines and report cases of illness to local health agencies. In Los Molinas, a stigma was linked to boiled water as something that only the "unwell" consumed, and thus, the idea of healthy residents boiling water prior to consumption was frowned upon. The two-year educational campaign was considered to be largely unsuccessful. This failure exemplified the importance of the roles of the communication channels that are involved in such a campaign for social change. An examination of diffusion in El Salvador determined that there can be more than one social network at play as innovations are communicated. One network carries information and the other carries influence. While people might hear of an innovation's uses, in Rogers' Los Molinas sanitation case, a network of influence and status prevented adoption.[44][45]

Failed diffusion does not mean that the technology was adopted by no one. Rather, failed diffusion often refers to diffusion that does not reach or approach 100% adoption due to its own weaknesses, competition from other innovations, or simply a lack of awareness. From a social networks perspective, a failed diffusion might be widely adopted within certain clusters but fail to make an impact on more distantly related people. Networks that are over-connected might suffer from a rigidity that prevents the changes an innovation might bring, as well.[42][43] Sometimes, some innovations also fail as a result of lack of local involvement and community participation.

Failed diffusion

Adopter category Definition
Innovators Innovators are willing to take risks, have the highest social status, have financial liquidity, are social and have closest contact to scientific sources and interaction with other innovators. Their risk tolerance allows them to adopt technologies that may ultimately fail. Financial resources help absorb these failures. [40]
Early adopters These individuals have the highest degree of opinion leadership among the adopter categories. Early adopters have a higher social status, financial liquidity, advanced education and are more socially forward than late adopters. They are more discreet in adoption choices than innovators. They use judicious choice of adoption to help them maintain a central communication position.[41]
Early Majority They adopt an innovation after a varying degree of time that is significantly longer than the innovators and early adopters. Early Majority have above average social status, contact with early adopters and seldom hold positions of opinion leadership in a system (Rogers 1962, p. 283)
Late Majority They adopt an innovation after the average participant. These individuals approach an innovation with a high degree of skepticism and after the majority of society has adopted the innovation. Late Majority are typically skeptical about an innovation, have below average social status, little financial liquidity, in contact with others in late majority and early majority and little opinion leadership.
Laggards They are the last to adopt an innovation. Unlike some of the previous categories, individuals in this category show little to no opinion leadership. These individuals typically have an aversion to change-agents. Laggards typically tend to be focused on "traditions", lowest social status, lowest financial liquidity, oldest among adopters, and in contact with only family and close friends.
Leapfroggers When resistors upgrade they often skip several generations in order to reach the most recent technologies.

Rogers defines an adopter category as a classification of individuals within a social system on the basis of innovativeness. In the book Diffusion of Innovations, Rogers suggests a total of five categories of adopters in order to standardize the usage of adopter categories in diffusion research. The adoption of an innovation follows an S curve when plotted over a length of time.[39] The categories of adopters are: innovators, early adopters, early majority, late majority and laggards [2] In addition to the gatekeepers and opinion leaders who exist within a given community, change agents may come from outside the community. Change agents bring innovations to new communities– first through the gatekeepers, then through the opinion leaders, and so on through the community.

Adopter categories

Adoption is an individual process detailing the series of stages one undergoes from first hearing about a product to finally adopting it. Diffusion signifies a group phenomena, which suggests how an innovation spreads.

Diffusion vs adoption

Rogers outlines several strategies in order to help an innovation reach this stage, including when an innovation adopted by a highly respected individual within a social network and creating an instinctive desire for a specific innovation. Another strategy includes injecting an innovation into a group of individuals who would readily use said technology, as well as providing positive reactions and benefits for early adopters.

Adoption strategies

Within the adoption curve at some point the innovation reaches critical mass. This is when the number of individual adopters ensures that the innovation is self-sustaining.

The rate of adoption is defined as the relative speed at which participants adopt an innovation. Rate is usually measured by the length of time required for a certain percentage of the members of a social system to adopt an innovation.[38] The rates of adoption for innovations are determined by an individual’s adopter category. In general, individuals who first adopt an innovation require a shorter adoption period (adoption process) when compared to late adopters.

Rate of adoption

Type Definition
Optional Innovation-Decision made by an individual who is in some way distinguished from others.
Collective Innovation-Decision made collectively by all participants.
Authority Innovation-Decision made for the entire social system by individuals in positions of influence or power.

Based on these considerations, three types of innovation-decisions have been identified.

  • Whether the decision is made freely and implemented voluntarily
  • Who makes the decision.

Two factors determine what type a particular decision is:


Five stages of the adoption process
Stage Definition
Knowledge The individual is first exposed to an innovation, but lacks information about the innovation. During this stage the individual has not yet been inspired to find out more information about the innovation.
Persuasion The individual is interested in the innovation and actively seeks related information/details.
Decision The individual takes the concept of the change and weighs the advantages/disadvantages of using the innovation and decides whether to adopt or reject the innovation. Due to the individualistic nature of this stage, Rogers notes that it is the most difficult stage on which to acquire empirical evidence.[11]
Implementation The individual employs the innovation to a varying degree depending on the situation. During this stage the individual also determines the usefulness of the innovation and may search for further information about it.
Confirmation The individual finalizes his/her decision to continue using the innovation. This stage is both intrapersonal (may cause cognitive dissonance) and interpersonal, confirmation the group has made the right decision.

Diffusion occurs through a five–step decision-making process. It occurs through a series of communication channels over a period of time among the members of a similar social system. Ryan and Gross first identified adoption as a process in 1943.[36] Rogers' five stages (steps): awareness, interest, evaluation, trial, and adoption are integral to this theory. An individual might reject an innovation at any time during or after the adoption process. Abrahamson examined this process critically by posing questions such as: How do technically inefficient innovations diffuse and what impedes technically efficient innovations from catching on? Abrahamson makes suggestions for how organizational scientists can more comprehensively evaluate the spread of innovations.[37] In later editions of Diffusion of Innovation, Rogers changes his terminology of the five stages to: knowledge, persuasion, decision, implementation, and confirmation. However, the descriptions of the categories have remained similar throughout the editions.


Organizations face more complex adoption possibilities because organizations are both the aggregate of its individuals and its own system with a set of procedures and norms.[32] Three organizational characteristics match well with the individual characteristics above: tension for change (motivation and ability), innovation-system fit (compatibility), and assessment of implications (observability). Organizations can feel pressured by a tension for change. If the organization's situation is untenable, it will be motivated to adopt an innovation to change its fortunes. This tension often plays out among its individual members. Innovations that match the organization's pre-existing system require fewer coincidental changes and are easy to assess are more likely to be adopted.[33] The wider environment of the organization, often an industry, community, or economy, exerts pressures on the organization, too. Where an innovation is diffusing through the organization's environment for any reason, the organization is more likely to adopt it.[25] Innovations that are intentionally spread, including by political mandate or directive, are also likely to diffuse quickly.[34][35]

Characteristics of organizations

Like innovations, adopters have been determined to have traits that affect their likelihood to adopt an innovation. A bevy of individual personality traits have been explored for their impacts on adoption, but with little agreement.[28] Ability and motivation, which vary on situation unlike personality traits, have a large impact on a potential adopter's likelihood to adopt an innovation. Unsurprisingly, potential adopters who are motivated to adopt an innovation are likely to make the adjustments needed to adopt it.[29] Motivation can be impacted by the meaning that an innovation holds; innovations can have symbolic value that encourage (or discourage) adoption.[30] First proposed by Ryan and Gross (1943), the overall connectedness of a potential adopter to the broad community represented by a city.[6] Potential adopters who frequent metropolitan areas are more likely to adopt an innovation. Finally, potential adopters who have the power or agency to create change, particularly in organizations, are more likely to adopt an innovation than someone with less power over his choices.[31]

Characteristics of individual adopters

Studies also identify other characteristics of innovations, but these are not as common as the ones that Rogers lists above.[23] The fuzziness of the boundaries of the innovation can impact its adoption. Specifically, innovations with a small core and large periphery are easier to adopt.[24] Innovations that are less risky are easier to adopt as the potential loss from failed integration is lower.[25] Innovations that are disruptive to routine tasks, even when they bring a large relative advantage, might not be adopted because of added instability. Likewise, innovations that make tasks easier are likely to be adopted.[26] Closely related to relative complexity, knowledge requirements are the ability barrier to use presented by the difficulty to use the innovation. Even when there are high knowledge requirements, support from prior adopters or other sources can increase the chances for adoption.[27]

Potential adopters evaluate an innovation on its relative advantage (the perceived efficiencies gained by the innovation relative to current tools or procedures), its compatibility with the pre-existing system, its complexity or difficulty to learn, its trialability or testability, its potential for reinvention (using the tool for initially unintended purposes), and its observed effects. These qualities interact and are judged as a whole. For example, an innovation might be extremely complex, reducing its likelihood to be adopted and diffused, but it might be very compatible with a large advantage relative to current tools. Even with this high learning curve, potential adopters might adopt the innovation anyway.[22]

Studies have explored many characteristics of innovations. Meta-reviews have identified several characteristics that are common among most studies.[21] These are in line with the characteristics that Rogers initially cited in his reviews.[22]

Characteristics of innovations

Element Definition
Innovation Innovations are a broad category, relative to the current knowledge of the analyzed unit. Any idea, practice, or object that is perceived as new by an individual or other unit of adoption could be considered an innovation available for study.[14]
Adopters Adopters are the minimal unit of analysis. In most studies, adopters are individuals, but can also be organizations (businesses, schools, hospitals, etc.), clusters within social networks, or countries.[15]
Communication channels Diffusion, by definition, takes place among people or organizations. Communication channels allow the transfer of information from one unit to the other.[16] Communication patterns or capabilities must be established between parties as a minimum for diffusion to occur.[17]
Time The passage of time is necessary for innovations to be adopted; they are rarely adopted instantaneously. In fact, in the Ryan and Gross (1943) study on hybrid corn adoption, adoption occurred over more than ten years, and most farmers only dedicated a fraction on their fields to the new corn in the first years after adoption.[6][18]
Social system The social system is the combination of external influences (mass media, organizational or governmental mandates) and internal influences (strong and weak social relationships, distance from opinion leaders).[19] There are many roles in a social system, and their combination represents the total influences on a potential adopter.[20]
The key elements in diffusion research are:


[13][12] and network analysis and Rogers' later books are among the most often cited in diffusion research. His methodologies are closely followed in recent diffusion research, even as the field has expanded into, and been influenced by, other methodological disciplines such as Diffusion of Innovations [11] In 1962

such as postage stamps and standardized school ethics codes. [10] who provided examples of institutional diffusion[9]

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.