World Library  
Flag as Inappropriate
Email this Article

Dodge Daytona

Dodge Daytona
1991 Dodge Daytona C/S
Manufacturer Dodge (Chrysler)
Production 1984–1993
Assembly St. Louis, Missouri, United States
Sterling Heights, Michigan, United States
Body and chassis
Class Compact
Body style 3-door hatchback
Layout Transverse front-engine, front-wheel drive
Platform G-body
Related Chrysler Laser
Chrysler Daytona
Chrysler GS
Engine 2.2 L K I4
2.2 L Turbo I I4
2.2 L Turbo II I4
2.2 L Turbo III I4
2.5 L K I4
2.5 L Turbo I I4
3.0 L Mitsubishi 6G72 V6
Transmission 5-speed manual
3-speed automatic
4-speed automatic
Wheelbase 1987–89: 97.0 in (2,464 mm)
1990–93: 97.2 in (2,469 mm)
Length 1987–1991: 179.2 in (4,552 mm)
1990–93 ES & IROC: 179.8 in (4,567 mm)
1992–93 Base: 179.0 in (4,547 mm)
Width 69.3 in (1,760 mm)
Height 1987–89: 50.1 in (1,273 mm)
1990–93: 50.3 in (1,278 mm)
1990–91 IROC & 1992–93 IROC R/T: 50.6 in (1,285 mm)
1992–93 IROC: 50.4 in (1,280 mm)
Predecessor Dodge Challenger
Successor Dodge Avenger

The Dodge Daytona is an automobile which was produced by Dodge from 1984 to 1993. It was a front-wheel drive hatchback based on the Chrysler G platform, which was derived from the Chrysler K platform. The Daytona was produced from 1984 to 1993. The Chrysler Laser was an upscale rebadged version of the Daytona. The Daytona was restyled for 1987, and again for 1992. It replaced the Mitsubishi Galant-based Challenger, and slotted between the Charger and the Conquest. The Daytona was replaced by the 1995 Dodge Avenger, which was built by Mitsubishi Motors. The Daytona derives its name mainly from the Dodge Charger Daytona, which itself was named after the Daytona 500 race in Daytona Beach, Florida.


  • History 1
    • Chrysler Laser 1.1
    • Production numbers 1.2
    • 1984 1.3
    • 1985 1.4
    • 1986 1.5
    • 1987–1988 1.6
      • Decepzione 1.6.1
    • 1989–1991 1.7
    • 1992–1993 1.8
  • References 2
  • External links 3


The Daytona originally used the 2.2 L Chrysler K engine in normally aspirated (93 hp) or turbocharged (142 hp) form. The 96 hp 2.5 L K engine was added for 1986. In 1985, the 2.2 L Turbo I engine's horsepower was increased to 146 hp (109 kW). The 1984 Daytona was available in three trim lines: standard, Turbo and Turbo Z. Total production was 49,347. The Daytona Turbo was on Car and Driver magazine's Ten Best list for 1984. Both the Daytona and Chrysler Laser were available with the Chrysler Electronic Voice Alert system through 1987. A performance oriented "Shelby" version of the Daytona was introduced in 1987.

Chrysler Laser

1985 Chrysler Laser XE

The Chrysler Laser was billed as the Chrysler brand's first sports car. The Laser was a virtual clone of the Dodge Daytona, but came only in the upscale trim version. It was produced from 1984 to 1986. The Laser emphasized European luxury, and was intended to be an "executive personal luxury coupe." The Laser was sleek, low-slung, and aerodynamic, with a drag coefficient of only .35. The car had a large rear hatchback, with a rear deck-lid spoiler. The 1984 Laser was available in two trim lines: standard and XE. In mid-1985, the XT trim was added as the top-of-the-line version. The standard, XE and XT trim lines would continue until the Laser’s demise in mid-1986. After 1986, the Daytona was exported to Canada as the Chrysler Daytona, officially ending Canadian Daytona sales under the Dodge marque. The turbo version of the Laser could be recognized by its use of black hood louvers. The 2.2 L Turbo I engine was available as standard equipment in the XE and XT trim lines and optional on the standard model. The Laser was intended to replace the Mitsubishi built Chrysler Conquest, a rear-wheel-drive vehicle which competed directly against the Toyota Celica Supra. The Laser name was silently terminated after the first half of 1986 model year, then resurrected for the 1989/1990 model year as the Plymouth Laser, built by Diamond Star Motors, a joint venture between Chrysler and Mitsubishi. The rebranded Laser shared its body and chassis with the Eagle Talon and Mitsubishi Eclipse.

In 1987, the Chrysler LeBaron was restyled as a more proper sports car, removing Chrysler's need for the Laser. However, the Laser’s luxury performance image would be carried over into the 1987 Dodge Daytona Pacifica as well as the Lancer Pacifica and other Dodge vehicles styled by Chrysler's Pacifica Studios.

The Laser was specified to have an estimated 22 mpg-US (11 L/100 km; 26 mpg-imp) city/35 mpg-US (6.7 L/100 km; 42 mpg-imp) highway fuel mileage. Chrysler offered a 5-year or 50,000-mile (80,000 km) warranty, or a Protection Plan with outer body rust-through protection, based on United States Automobile Club tests. Mark Cross leather seats and a six-way power options were available as options.

Notable features of the Chrysler Laser XE:

  • A dashboard with digital readouts for the speedometer, tachometer, odometer, temperature, oil pressure, voltage, and fuel.
  • An electronic monitoring system, situated near the top of the center console. This monitoring system checked 22 separate functions on the car, such as an open door, low fuel, or a blown taillight, and would give a digital readout of the situation, along with an audio message made by a synthesized voice.
  • An electronic navigator, which would give information on mileage, miles traveled, distance to destination, and elapsed driving time.

Production numbers

  • 1984 - 59,858 (Laser- 33,976/Laser XE- 25,882)
  • 1985 - 50,866 (Laser- 29,221/Laser XE- 18,193/Laser XT- 3,452)
  • 1986 - 36,672 (Laser- 14,134/Laser XE- 15,549/Laser XT- 6,989)


The Daytona debuted with a 142 hp Turbo I motor. Many Turbo Z models were produced and more luxurious than other years because of the Mark Cross leather interiors, light up speakers, and rear amp switches. These options were dropped after 1984.


Changes were minimal for the Daytona's second year of production. The Turbo Z model was no longer listed as a package but was now a model in its own right. The wrap-around spoiler, formerly exclusive to the Turbo Z model, was now offered on all three models. But the biggest change was under the hood: the 2.2 Turbo was given 4 more hp to 146 hp (109 kW), and a new shift linkage was added. Optional "Swiss cheese" wheels were replaced with new optional "Pizza" wheels. All wheels now had five lug nuts (instead of four) Total production was 47,519.


1986 Daytona Turbo Z CS (Carroll Shelby[1]) with T roof

There were changes for the 1986 Daytona. The middle "Turbo" model was dropped, leaving only two models: Base and Turbo Z. Engine changes were also made: A new 2.5 L 100 hp (75 kW) 4-cylinder engine was added for the base model. A new t-roof package was added to the option list, but just 5,984 Daytona owners chose this option. The biggest addition was the optional C/S (Competition Series). This consisted of 32 mm (1.3 in) front and 28 mm (1.1 in) rear anti-sway bars, performance tuned struts, and speed rated tires. This package would foreshadow the Daytona Shelbys of 1987 and beyond. Only 7,704 owners added this handling package to their Daytonas. Total production this year would be 44,366.


1987–1991 Dodge Daytona
1987 Dodge Daytona Shelby z

In 1987, the Daytona was restyled externally, and featured pop-up headlights. New in 1987 was a Shelby Z trim level with an available Turbo II (174 hp (130 kW) - 200 lb·ft (271 N·m)) intercooled version of the 2.2 L Chrysler K engine, as well as a heavy-duty A555 transaxle with Getrag gears. The Shelby Z also featured numerous suspension upgrades, including a larger diameter front sway bar, front and rear disc brakes. This version was sold in Europe under the name Chrysler GS Turbo II. A more luxury-oriented Pacifica trim line was also added to replace the Chrysler Laser, which was dropped by mid-year 1986. Among the standard and optional equipment: leather interior, an 8 way power enthusiast drivers seat (with mechanical Thigh/Lumbar controls), digital dash, 12 button navigator (with instant fuel ratings as well as trip averages and estimated travel times), among several other features. In 1988, the C/S package was revived. However, this time the C/S was available only on the base model Daytona. In order to cut weight and make a lighter Daytona, the C/S came without the ground effects and other elegant features that were featured on the Shelby. The AGB model C/S featured a turbo I 2.2-liter engine, which was available in both automatic and manual transmissions.


Following the Chrysler takeover of all-wheel drive (AWD) system designed by Lotus Cars, UK, and the car was called the Decepzione. Despite its performance and media buzz generated by articles in Car and Driver magazine, the project was discontinued because of the engine's oil pan having just 1.5 inches (38.1 mm) of ground clearance, necessitated by the comparatively tall engine block.


Silver being the rarest with only 258 being made followed by black. 1989 saw the introduction of the ES model offered with silver contrasting ground affects, along "snowflake" patterned rim design. The 2.2 Turbo I was replaced with the 2.5 Turbo I, rated at 150 hp and 170 ft. lbs. of torque. ES was offered as an appearance package/equipment group on base models in order to attract the "average" Daytona buyer’s eye without a major price hike. Also introduced in 1989 was the AGS C/S Competition model, which was featured along with the regular AGB model. This new model of C/S featured an intercooled 2.2 turbo II engine, along with many other features that were also on the Shelby. However, this model was only available with a manual transmission. The AGS C/S package would remain in availability until 1991. The AGB C/S Performance model had the 2.5 non-intercooled turbo I engine available with 5 speed manual or 3 speed automatic. Driver side airbag was standard.

In 1990, all Daytonas received an interior restyling, featuring a more modern-feeling cockpit style wraparound dashboard. Also in 1990, a Variable Nozzle Turbocharger (VNT Turbo IV) borrowed from Shelby's 1989 vnt csx, was offered in the Shelby model producing the same 174 hp (130 kW) as the Turbo II but, it eliminated turbo lag and improved driveability. Also for 1990 a 3.0 L SOHC V6 from Mitsubishi was made available, as well as a redesigned interior similar to that of the Chrysler LeBaron coupe and convertible. In addition, 1990 saw the introduction of a standard driver's side airbag to the Daytona. This was in keeping with Chrysler's decision to offer a driver's side airbags across most models. In 1991, the 2.2 liter turbo was dropped in favor of the new 2.5L "High Torque Turbo." Although sporting a lesser 152 hp, this power-plant offered 210 ft. lbs. of torque, exceeding that of the Turbo II. Also new was the addition of an IROC model with either the 3.0 v6 or the turbocharged 2.5 L engine. Visually, Iroc models differed from lesser models, having a ground effects kit and alloy wheels, among other differences. The Iroc Decals where added in halfway through 1991 even though all Shelby Daytona's from 1991 where considered to be an "IROC", which could be revealed if one looked up their VIN # online. There are no difference between a 91 Shelby and Iroc besides the decals and the J in the vin sequence. On 1991 model Daytona Shelbys the vin had the sequence `G74J` and the Iroc's had the sequence G743. Over the years people have added the wrong shelby or iroc decals to their cars, one way to correct this is to check the vin sequence to determine what model it is.


Dodge Daytona

Production was moved from the St. Louis, Missouri plant to the Sterling Heights, Michigan plant. This second Daytona restyling replaced the pop-up headlights with flush-mounted rounded ones, along with a new grille and rear fascia. Window surround moldings on the doors were also new, and rounder than the sharper angles of moldings on the 1984 to 1991 models. The new model also displayed the new Dodge ram's head emblem on the hood and below the read light. While 6-cylinder power became an option on lower end models, the 3.0 L Mitsubishi V6 was the standard engine on IROC models. Optional on the 1992 IROC was the 2.5l "High Torque" Turbo, available as a very rare option (less than 230 produced). Also available on IROC was the new 'R/T' performance package, which featured a 224 hp (167 kW) Turbo III version of the 2.2 L 4-cylinder, but with a Lotus designed DOHC cylinder head and direct ignition system instead of a distributor-type ignition system. Although the Shelby trim was discontinued in 1991 (due to the end of Shelby's involvement with Chrysler), a small number of 1992 Daytona IROC's were produced bearing the Shelby name. These IROCs featured "Shelby" decals, and were all 2.5 Turbo cars, as they featured the Shelby Performance Package sales code. These rare Shelby versions were mainly "Chrysler" branded Daytonas, and were part of an early run of IROCs. These were the last production vehicles produced by Chrysler Corp to bear the Shelby name. Production of the Daytona ended on March 2, 1993, and the Daytona was replaced by the 1995 Dodge Avenger. Today the Dodge Daytona, along with many other turbocharged Chrysler vehicles, has developed a sort of cult following, remaining popular among its own group of followers because of its durable engine, which can be easily modified to put out large quantities of power at relatively low cost and ease.


  1. ^

External links

  • TurboMopar Discussion Forum
  • Daytona/Laser page
  • What's It Like To Drive - Describes a test between two Dodge Daytonas, one FWD and one RWD
  • - Daytona Road Test pdf
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.