World Library  
Flag as Inappropriate
Email this Article

Electoral system of Australia

Article Id: WHEBN0000318313
Reproduction Date:

Title: Electoral system of Australia  
Author: World Heritage Encyclopedia
Language: English
Subject: Australia, List of political parties in Australia, Foreign relations of Australia, Elections in Australia, Primary
Collection: Australian Constitutional Law, Elections in Australia, Electoral Systems by Country
Publisher: World Heritage Encyclopedia

Electoral system of Australia

This article is part of a series on the
politics and government of

The Australian electoral system has evolved over 150 years of democratic government, including through the Australian Parliament, instituted in 1901. The present-day federal parliament has a number of distinctive features including compulsory voting, with full-preferential instant-runoff voting in single-member seats to elect the lower house, the House of Representatives, and the use of group-ticket, single-transferable proportional voting to elect the upper house, the Senate.[1]

Federal elections and referenda are conducted by the Australian Electoral Commission. State and local government elections are overseen by separate Electoral Commissions in each state and territory: New South Wales elections are conducted by the New South Wales Electoral Commission; in Queensland it is the Electoral Commission of Queensland; in Victoria it is the Victorian Electoral Commission; in South Australia it is the Electoral Commission of South Australia; in Tasmania it is the Tasmanian Electoral Commission; and in the Australian Capital Territory it is the Australian Capital Territory Electoral Commission.


  • Voting system 1
    • Compulsory voting 1.1
    • Objections to compulsory voting 1.2
  • Preferential voting 2
    • Allocation process for House of Representatives 2.1
    • Alternative allocation methods for Senate 2.2
  • Gerrymandering and malapportionment 3
    • Examples 3.1
  • The Parliament 4
  • The House of Representatives 5
    • Primary votes, two-party-preferred votes, and seat results since 1937 5.1
    • Counting votes in elections for the House of Representatives 5.2
      • Exhausted preferences 5.2.1
    • Two-party majorities, swings and pendulums 5.3
    • Redistributions 5.4
    • House casual vacancies 5.5
  • The Senate 6
    • The Senate count 6.1
    • Senate casual vacancies 6.2
  • Double dissolutions 7
  • Nominations 8
  • References 9
  • External links 10

Voting system

Compulsory voting

Australia enforces compulsory voting,[2] which has been a requirement since 1924. Compulsory voting at referendums was considered when a referendum was proposed in 1915, but, as the referendum was never held, the idea was put on hold.[3]

The immediate impetus for compulsory voting at the federal level was the low voter turnout (59.38%)[3] at the 1922 federal election. However, compulsory voting was not on the platform of either the Stanley Bruce-led Nationalist/Country party coalition government or the Matthew Charlton-led Labor opposition. The actual initiative for change was made by Herbert Payne, a backbench Tasmanian senator from the Nationalists who introduced a private member's bill in the Senate, the Commonwealth Electoral Act 1924, on 16 July 1924. Senator Payne's bill was passed with little debate (the House of Representatives agreeing to it in less than an hour), and in neither house was a division required, hence no votes were recorded against the bill.[4] It received Royal Assent on 31 July 1924.[5] The 1925 federal election was the first to be held under compulsory voting; the turnout figure climbed to 91.4%, an increase of 32 percentage points on the previous election.

Voting is compulsory both at federal elections and at elections for the state and territory legislatures. In the states of South Australia, Tasmania and Western Australia voting at local elections is not compulsory.[6] About 5% of enrolled voters fail to vote at most elections. People in this situation are asked to explain their failure to vote. If no satisfactory reason is provided (for example, illness or religious prohibition), a fine of up to $170 is imposed,[7] and failure to pay the fine may result in a court hearing.

A citizen can only vote when enrolled. Enrolling to vote is mandatory. Failure to enroll can incur a fine.[8] However, citizens who later enroll themselves are protected from prosecution for not enrolling in the previous years by section 101(7) of the Commonwealth Electoral Act 1918.[9] In New South Wales, this situation has been somewhat modified by the NSW Electoral Commission's "Smart Roll" system. Introduced in 2009, the system draws information from various government departmental sources and enrolls eligible electors automatically on to the state roll, but not the federal roll.[10] A protection in Section 101 (8) exists for offences prior to enrolment (including failure to enroll) for those enrolled in such a way by the Electoral Commissioner.

It is an offence to "mislead an elector in relation to the casting of his vote". An "informal vote" is one which has not been filled in correctly or not at all. The number of informal votes is counted but, in the determination of voter preferences, they are included in the total number of (valid) votes cast. Around 95% of registered voters attend polling, and around 5% of House of Representatives votes are informal.[11]

Objections to compulsory voting

Following the Peter Singer, in Democracy and Disobedience, argues that compulsory voting could negate the obligation of a voter to support the outcome of the election, since voluntary participation in elections is deemed to be one of the sources of the obligation to obey the law in a democracy. In 1996 Albert Langer was jailed for three weeks on contempt charges in relation to a constitutional challenge on a legal way not to vote for either of the major parties. Chong, Davidson and Fry argue that Australian compulsory voting is disreputable, paternalistic, disadvantages smaller political parties, and allows major parties to target marginal seats and make some savings in pork-barrelling because of this targeting. Chong et al. also argue that denial is a significant aspect of the debate about compulsory voting.[12]

A counter argument to opponents of compulsory voting is that in these systems the individual still has the practical ability to abstain at the polls by voting informally if they so choose, due to the secrecy of the ballot. A spoilt vote does not count towards any political party and effectively is the same as choosing not to vote under a non-compulsory voting system. However, Singer argues that even the appearance of voluntary participation is sufficient to create an obligation to obey the law.

In the 2010 Australian election, Mark Latham urged Australians to vote informally by handing in blank ballot papers for the 2010 election. He also stated that he doesn't feel it is fair for the government to force citizens to vote if they don't have an opinion or threaten them into voting with a fine.[13] An Australian Electoral Commission spokesman stated that the Commonwealth Electoral Act did not contain an explicit provision prohibiting the casting of a blank vote.[14] How the Australian Electoral Commission arrived at this opinion is unknown; it runs contrary to the opinions of Chief Justice Sir Garfield Barwick, who wrote that voters must actually mark the ballot paper and deposit that ballot into a ballot box, and Justice Blackburn who was of the opinion that casting an invalid vote was a violation of the Act.[12]

Tim Evans, a Director of Elections Systems and Policy of the AEC, wrote in 2006 that "It is not the case, as some people have claimed, that it is only compulsory to attend the polling place and have your name marked off and this has been upheld by a number of legal decisions."[15]

Preferential voting

Australia uses various forms of preferential voting for almost all elections. Under this system, voters number the candidates on the ballot paper in the order of their preference. The preferential system was introduced in 1918, in response to the rise of the Country Party, a party representing small farmers. The Country Party split the anti-Labor vote in conservative country areas, allowing Labor candidates to win on a minority vote. The conservative government of Billy Hughes introduced preferential voting as a means of allowing competition between the two conservative parties without putting seats at risk. It was first used at the Corangamite by-election on 14 December 1918.[16][17] The system was first used for election for the Queensland Parliament in 1892. It was introduced in the Tasmanian House of Assembly in 1906 as a result of the work of Thomas Hare and Andrew Inglis Clark.

Preferential voting has gradually extended to both upper and lower houses, in the federal, state and territory legislatures, and is also used in municipal elections, and most other kinds of elections as well, such as internal political party elections, trade union elections, church elections, elections to company boards and elections in voluntary bodies such as football clubs. Negotiations for disposition of preference recommendations to voters are taken very seriously by candidates because transferred preferences carry the same weight as primary votes. Political parties usually produce how-to-vote cards to assist and guide voters in the ranking of candidates.

At some polling places in the Australian Capital Territory, voters may choose between voting electronically or on paper.[18] Otherwise, Australian elections are carried out using paper ballots. If more than one election takes place, for example for the House of Representatives and the Senate, then each election is on a separate ballot paper, which are of different colours and which are deposited into separate ballot boxes.

Allocation process for House of Representatives

The main elements of the operation of preferential voting for single-member House of Representatives divisions are as follows:[19][20]

  • Voters are required to place the number "1" against their first choice of candidate, known as the "first preference" or "primary vote".
  • Voters are then required to place the numbers "2", "3", etc., against all of the other candidates listed on the ballot paper, in order of preference.
  • Each ballot paper is examined to ensure that it is validly filled in.
  • The number "1" or first preference votes are counted first. If no candidate secures an absolute majority (more than half) of first preference votes, then the candidate with the fewest votes is excluded from the count.
  • The votes for the eliminated candidate are re-allocated to the remaining candidates according to the number "2" or "second preference" votes.
  • If no candidate has yet secured an absolute majority of the vote, then the next candidate with the fewest primary votes is eliminated. This preference allocation is repeated until there is a candidate with an absolute majority. Where a second (or subsequent) preference is expressed for a candidate who has already been eliminated, the voter's third or subsequent preferences are used.

Following the full allocation of preferences, it is possible to derive a two-party-preferred figure, where the votes are divided between the two main candidates in the election. In Australia, this is usually between the candidates from the two major parties.

Alternative allocation methods for Senate

For the Australian Senate, each State constitutes one multi-member electorate. Currently, 12 senators are elected from each State, one half every three years, except in the case of double dissolution when elections for all 12 senators in each State takes place. The number of senators to be elected determines the 'quota' required to be achieved for election. For a half-Senate election of 6 places to be filled, the quota in each State is 14.28% (calculated using the formula 1/(6+1)), while after a double dissolution the quota is 7.69% (calculated using the formula 1/(12+1)).

The federal Senate electoral system, and those for some state legislatures, now provide for simultaneous registration of party-listed candidates and party-determined orders of voting preference, known as 'group voting tickets' or 'above the line voting' which involves placing the number '1' in a single box and the vote is then allocated in accordance with the party's registered voting preferences. The AEC automatically allocates preferences, or votes, in the predetermined order outlined in the group voting ticket. Each party or group can register up to three group voting tickets. This highly complex system has potential for unexpected outcomes,[21] including the possible election of a candidate who may have initially received an insignificant primary vote tally. (See, for example, the Minor Party Alliance at the 2013 federal election.) An estimated 95% of all votes are cast 'above the line'.[22]

The alternative is to use 'below the line voting' by numbering a large number of individual candidate's boxes in the order of their own preference. To be valid, the voter must place sequential numbers against every candidate on the ballot paper, and the risk of error and invalidation of the vote is significant.

Gerrymandering and malapportionment

Elections to the Senate are conducted on a State-basis, with each State constituting one multi-member electorate. Divisions for the House of Representatives elect one member per division.

Australian history has seen very little gerrymandering of electoral boundaries, relevant only for the House of Representatives and State Legislative Assemblies, which have nearly always been drawn up by public servants or independent boundary commissioners. But Australia has seen systematic malapportionment of electorates (the allocation of more or fewer electoral districts to one part of a country or state than its population would merit).

All the colonial legislatures before Federation, and the federal parliament after it, allocated more representation to rural districts than their populations merited. This was justified on several grounds: that country people had to contend with greater distances and hardships, that country people (and specifically farmers) produced most of the nation's real wealth, and that greater country representation was necessary to balance the radical tendencies of the urban population.

However, in the later 20th century, these arguments were successfully challenged, and by the early 21st century malapportionment was abolished in all states. In all states, electoral districts must have roughly the same number of voters, with variations allowed for rural areas due to their sparse population. Proponents of this concept call this "one vote one value."


The most conspicuous examples of malapportionment were those of South Australia, Queensland and Western Australia.

South Australia

In South Australia, the 1856 Constitution stipulated that there must be two rural constituencies for every urban constituency. By the early 1960s, the urban-rural voter ratio was almost exactly reversed. More than two-thirds of the state's population lived in Adelaide and its suburbs, but the rural areas elected two-thirds of the legislature. This was despite the fact that by this time, rural seats had on average one-quarter the number of voters that urban seats had.

This gross distortion came into sharp focus during three consecutive state elections in the 1960s. In 1962, in which Labor routed the governing Liberal and Country League in the two-party vote, but came up one seat short of a majority. Long time premier Sir Thomas Playford was able to continue in power with the support of two independents. The setup enabled Playford to stay in office from 1938 to 1965, even though from 1947 onward he was defeated by increasing margins in terms of actual votes. Largely because Playford was the main beneficiary, the setup was called "the Playmander," although it was not strictly speaking a gerrymander. The Playmander was not overcome until Labor defeated the LCL in 1965. Even then, the rural weighting was strong enough that Labor won just barely enough seats for a majority, despite winning resoundingly in the two-party vote.

The LCL regained power in 1968, in another case that demonstrated the gross inequities of the Playmander. While Labor won the popular vote with 52 percent to the LCL's 43.8 percent, Labor suffered a two-seat swing, leaving both parties with 19 seats each. Conservative independent Tom Stott threw his support to the LCL. Playford's successor as LCL leader, Steele Hall, was highly embarrassed at the manner in which he became premier, and immediately set about enacting a fairer system. A few months after taking office, Hall enacted a new electoral map with 47 seats—28 seats in Adelaide and 19 in the country. Previously, there had been 39 seats—13 in Adelaide and 26 in country areas. However, for some time the LCL's base in Adelaide had been limited to the wealthy eastern crescent and the area around Holdfast Bay. While it came up short of "one vote one value," as Labor demanded, Hall was well aware that he was effectively handing the premiership to his Labor counterpart, Don Dunstan, at the next election. As expected, Labor won the 1970 election handily.


In Queensland, the malapportionment initially benefitted the Labor Party, since many small rural constituencies were dominated by workers in provincial cities who were organised into the powerful Australian Workers' Union. But after 1957, the Country Party (later renamed the National Party) governments of Sir Frank Nicklin and Sir Joh Bjelke-Petersen tweaked the system to give the upper hand to their rural base and isolate Labor support in Brisbane and provincial cities. In later years, this system made it possible for Bjelke-Petersen to win elections with only a quarter of the first preference votes. On average, a Country/National seat took only 7,000 votes to win, compared with 12,000 for a Labor seat. Combined with the votes of the Liberals (in Queensland, the National Party had historically been the senior partner in the non-Labor coalition), this was enough to lock Labor out of power even in years when Labor was the biggest single party in the legislature. This "Bjelkemander" was not overcome until the final defeat of the Nationals in 1989. Under new Labor premier Wayne Goss, a revised map was enacted with 40 seats in Brisbane and 49 in the country. Seats had roughly the same number of voters, with a greater tolerance allowed for seats in rural areas.

Western Australia

Western Australia retained a significant malapportionment in the Legislative Assembly until 2008. Under the previous system, votes in the country were worth up to four times the value of votes in Perth, the state's capital city, even though Perth contained almost three-fourths of the state's population. On 20 May 2005 the state Parliament passed new electoral laws, removing the malapportionment with effect from the following election. Under the new laws, electorates must have a population of 21,343, with a permitted variation of 10%. Electorates with a land area of more than 100,000 km² (40,000 mi²) are permitted to have a variation of 20%, in recognition of the difficulty of representing the sparsely populated north and east of the state.[23] Large districts would be attributed an extra number of notional voters, equal to 1.5% the area of the district in square kilometres, for the purposes of this calculation. This Large District Allowance will permit large rural districts to have many fewer voters than the average district enrolment. The Office of the Electoral Distribution Commissioners[24] gives the following example: Central Kimberley-Pilbara district has 12601 electors and an area of 600038 square kilometres. The average district enrolment for WA is 21343. Central Kimberley-Pilbara thus obtains 9000 notional extra electors, bringing its notional total to 21601, which is acceptably close to the average district enrolment.

A modified form of malapportionment was, however, retained for the Legislative Council, the state upper house. According to ABC election analyst Antony Green, the rural weighting in the Legislative Council is still significant enough that a Liberal state premier has no choice but to include the National Party in his government, even if the Liberals theoretically have enough seats in the Legislative Assembly to govern alone.[25]

The Parliament

The Parliament of Australia is a bicameral (two-house) Parliament. It combines some of the features of the Parliament of the United Kingdom with some features of the United States Congress. This is because the authors of the Australian Constitution had two objectives: to reproduce as faithfully as possible the Westminster system of parliamentary government, while creating a federation in which there would be a division of powers between the national government and the states, regulated by a written Constitution.

In structure, the Australian Parliament resembles the United States Congress. There is a House of Representatives elected from single-member constituencies of approximately equal population, and there is a Senate consisting of an equal number of Senators from each state, regardless of population (since 1975 there have also been Senators representing the territories).

But in function, the Australian Parliament follows the Westminster system. The Prime Minister holds office because they can command the support of the majority of the House of Representatives, and must resign or advise an immediate election if the house passes a vote of no-confidence in their administration. If they fail to do so, they risk dismissal by the Governor-General. All ministers are required to be members of Parliament (although the Constitution permits a person who is not currently a member of parliament to hold a ministerial portfolio for a maximum period of three months).

The House of Representatives

A sample ballot paper from NSW for the House of Representatives.

The Australian House of Representatives has 150 members elected from single-member constituencies (formally called "Electoral Divisions", but usually called seats or electorates in Australia; see Australian electorates) for three-year terms. Voters must fill out the ballot paper by numbering all the candidates in order of their preference. Failure to number all the candidates, or an error in numbering, renders the ballot informal (invalid).[26] The average number of candidates has tended to increase in recent years: there are frequently 10 or 12 candidates in a seat, and at the Wills by-election in April 1992 there were 22 candidates.[27] This has made voting increasingly onerous, but the rate of informal voting has increased only slightly. The low rate of informal voting is largely attributed to advertising from the various political parties indicating how a voter should number their ballot paper, called a How-to-Vote Card. On election day, volunteers from political parties stand outside polling places, handing voters a card which advises them how to cast their vote for their respective party. Thus, if a voter wishes to vote for the Liberal Party, they may take the Liberal How-to-Vote Card and follow its instructions. While they can lodge their vote according to their own preferences, Australian voters show a high degree of party loyalty in following their chosen party's card.

A disinterested voter who has formed no personal preference may simply number all the candidates sequentially, 1, 2, 3, etc., from top to bottom of the ballot paper, a practice termed donkey voting, which advantages those candidates whose names are placed nearest to the top of the ballot paper. Before 1984, candidates were listed in alphabetical order, which led to a profusion of Aaronses and Abbotts contesting elections. A notable example was the 1937 Senate election, in which the Labor candidate group in New South Wales consisted of Amour, Ashley, Armstrong and Arthur—all of whom were elected. Since 1984, the listed order of candidates on the ballot paper has been determined by drawing lots, a ceremony performed publicly by electoral officials immediately after the appointed time for closure of nominations.

Primary votes, two-party-preferred votes, and seat results since 1937

ALP = Australian Labor Party, L+NP = grouping of Liberal/National/LNP/CLP Coalition Parties (and predecessors), Oth = other parties and independents.

Counting votes in elections for the House of Representatives

The House of Representatives uses full preferential voting, which is known outside Australia by names such as "instant runoff voting" (IRV) and "alternative voting".

When the polls close at 6pm on election day, the votes are counted. The count is conducted by officers of the Australian Electoral Commission, watched by nominated volunteer observers from the political parties, called scrutineers, who are entitled to observe the whole voting process from the opening of the booth. The votes from each polling booth in the electorate are tallied at the office of the returning officer for the electorate. If one of the candidates has more than 50% of the vote, then they are declared elected. Australian politics are influenced by social and economic demographics, though the correlation between "class" and voting is not always simple.[28] Typically, the National Party will poll higher in rural seats. The Liberal Party and the Australian Labor Party are not as easily generalised. In a strong seat, the elected party might win up to 80% of the two-party-preferred vote. In the 2004 federal election, the highest winning margin in a seat was 25.1%,[29] with most seats won by a margin of less than 10%.

In the remaining seats, no single candidate will have a majority of the primary votes (or first-preference votes). A hypothetical result might look like this:

White (Democrat) 6,000 06.0%
Smith (Labor) 45,000 45.0%
Jones (Liberal) 35,000 35.0%
Johnson (Green) 10,000 10.0%
Davies (Ind) 4,000 04.0%

On election night, an interim distribution of preferences called a TCP (two-candidate-preferred) count is performed. The electoral commission nominates the two candidates it believes are most likely to win the most votes and all votes are distributed immediately to one or the other preferred candidate.[30] This result is indicative only and subsequently the formal count will be performed after all "declaration" (e.g. postal, absent votes) votes are received.

In this example, the candidate with the smallest vote, Davies, will be eliminated, and his or her preferences will be distributed: that is, his or her 4,000 votes will be individually re-allocated to the remaining candidates according to which candidate received the number 2 vote on each of those 4000 ballot papers. Suppose Davies's preferences split 50/50 between Smith and Jones. After re-allocation of Davies's votes, Smith would have 47% and Jones 37% of the total votes in the electorate. White would then be eliminated. Suppose all of White's preferences went to Smith. Smith would then have 53% and would be declared elected. Johnson's votes would not need to be distributed.

Exhausted preferences

The exhausted counts correspond to votes that ought to be informal, if strictly following the rules above, but were deemed to have expressed some valid preferences. The Electoral Act has since been amended to almost eliminate exhausted votes.

Section 268(1)(c) of the Commonwealth Electoral Act 1918 now has the effect of making the vote of any elector that does not preference every candidate on the ballot paper an informal vote as opposed to counting the vote until the voter's preference exhausts.

Two-party majorities, swings and pendulums

Since 1984 the preferences of all candidates in House of Representatives seats have been distributed, even if this is not necessary to determine the winner of the seat. This is done to determine the percentage of the votes obtained by the winning candidate after the distribution of all preferences. This is called the two-party-preferred vote. For example, if (in the example given above), Smith finished with 58% of the vote after the distribution of Johnson's preferences, Smith's two-party vote would be 58% and the seat would be said to have a two-party majority of 8%. It would therefore need a two-party swing of 8 percentage points to be lost to the other side of politics at the next election.

Once the two-party majorities in all seats are known, they can then be arranged in a table to show the order in which they would be lost in the event of an adverse swing at the next election. Such tables frequently appear in the Australian media and are called election pendulums or sometimes Mackerras pendulums after the political scientist Malcolm Mackerras, who popularised the idea of the two-party vote in his 1972 book Australian General Elections.

Here is a sample of the federal election pendulum from the 2001 election, showing some of the seats held by the Liberal-National Party coalition government, in order of their two-party majority. A seat with a small two-party majority is said to be a marginal seat or a swinging seat. A seat with a large two-party majority is said to be a safe seat, although "safe" seats have been known to change hands in the event of a large swing.

Seat State Majority Member Party
HINKLER Qld 00.0 Paul Neville NPA
SOLOMON NT 00.1 Dave Tollner Lib
ADELAIDE SA 00.2 Hon Trish Worth Lib
CANNING WA 00.4 Don Randall Lib
DOBELL NSW 00.4 Ken Ticehurst Lib
PARRAMATTA NSW 01.1 Ross Cameron Lib
McEWEN Vic 01.2 Fran Bailey Lib
PATERSON NSW 01.4 Bob Baldwin Lib
HERBERT Qld 01.6 Peter Lindsay Lib
RICHMOND NSW 01.6 Hon Larry Anthony NPA
DEAKIN Vic 01.7 Philip Barresi Lib
EDEN-MONARO NSW 01.7 Gary Nairn Lib
HINDMARSH SA 01.9 Hon Christine Gallus Lib


The boundaries of Australian electoral constituencies are drawn up by the Australian Electoral Commission, an independent statutory authority, completely independent of political considerations. Members of Parliament and political parties may make submissions to the Commission on proposed new boundaries, but any interference with the Commission's deliberations would be a serious offence.

The Electoral Act requires that all seats have approximately equal numbers of enrolled voters. When the Commission determines that population shifts within a state have caused some seats to have too many or too few voters, new boundaries are drawn up. This is called a redistribution. Redistributions are also held when the Commission determines (following a formula laid down in the Act) that the distribution of seats among the states and territories must be changed because some states are growing faster than others.

In 2003, for example, redistributions were held in Victoria, Queensland and South Australia. South Australia lost one seat, while Queensland gained a seat. Victoria kept the same number of seats, but one seat was abolished and one new seat created.

House casual vacancies

If a member's seat becomes vacant mid-term, whether through resignation, death or some other possible reasons, a by-election may be held. Further details are at Casual vacancies in the Australian Parliament.

The Senate

The Australian Senate has 76 members: each of the six states elects 12 Senators, and the Northern Territory (NT) and the Australian Capital Territory (ACT) each elect two Senators. The several other Australian Territories have very small populations and are represented by Northern Territory and ACT Senators (for example, Christmas Island residents are represented by NT Senators, while Jervis Bay Territory residents are represented by ACT Senators).

Senators for the states serve six-year terms, with half the Senators from each state usually being elected at each federal election. The terms of the territory Senators coincide with the duration of the House of Representatives.

The Senate is elected both proportionately and preferentially, except that each state has an equal number of seats so that the distribution of seats to states is non-proportional to the total Australian population. Thus, although within each state the seats proportionally represent the vote for that state, overall the less populous states are proportionally stronger in representation for their population compared to the more populous states.

In each state, political parties which are registered with the Electoral Commission present lists of candidates, which appear as a group on the Senate ballot paper. Independents and members of unregistered parties can also nominate, but they cannot appear on ballot paper as a group.

Voters can vote for the Senate in one of two ways. They can number all the candidates, as they would with a House of Representatives ballot: but since there may be 50 or 60 candidates on the ballot paper, few voters do this. This is called below-the-line voting. Or they can simply write "1" in a box indicating the party for which they wish to vote. This is called above-the-line voting. A large majority of voters generally cast their votes above the line for convenience, because lengthy attention and concentration may be necessary to differentiate unduplicated preferences for a very large number of candidates.

When votes are cast above the line, they amount to accepting whatever "1,2,3,4,..." sequence has been pre-nominated by that party or group in the particular state or territory. When an election is imminent, such details (multi-page) can be inspected at the electoral commission's website,

The Senate count

The form of preferential voting used in the Senate is technically known as the "Inclusive Gregory".[31]

The system for counting Senate votes is complicated, and a final result is sometimes not known for several weeks. When the Senate vote is counted, a quota for election is determined. This is the number of valid votes cast, divided by the number of Senators to be elected plus one.

For example, here is the Senate result for the state of New South Wales from the 1998 federal election. For greater clarity the votes cast for 50 minor party and independent candidates have been excluded.

The quota for election was 3,755,725 divided by seven, or 536,533.

Enrolment:                              4,031,749
Turnout:                                3,884,333 (96.3%)
Informal votes:                           128,608 (03.3%)
Formal votes:                           3,755,725
Quota for election:                       536,533
Steve HUTCHINS                  ALP     1,446,231   38.5  ELECTED 1
Hon John Faulkner *             ALP         2,914   00.1  Group H
Michael Forshaw *               ALP           864   00.0  Q:2.7073
Ursula Stephens                 ALP         2,551   00.1
David Oldfield                  ON        359,654   09.6  Group K
Brian Burston                   ON            570   00.0  Q:0.6729
Bevan O'Regan                   ON            785   00.0
Bill HEFFERNAN *                Lib     1,371,578   36.5  ELECTED 2
Dr John Tierney *               Lib         1,441   00.0  Group L
Sandy Macdonald *               NPA         1,689   00.0  Q:2.5638
Concetta Fierravanti-Wells      Lib           855   00.0
Aden Ridgeway                   AD        272,481   07.3  Group M
Matthew Baird                   AD            457   00.0  Q:0.5142
Suzzanne Reddy                  AD          2,163   00.1  
David Mendelssohn               AD            809   00.0
John Sutton                     Grn        80,073   02.1  Group U
Catherine Moore                 Grn           748   00.0  Q:0.1521
Lee Rhiannon                    Grn           249   00.0
Suzie Russell                   Grn           542   00.0
128,608 (03.3%) informal                3,755,725

In this table, the Group number allocated to each list is shown at right. Below that is the number of quotas polled by each list. Thus, "Q:2.7073" next to the Labor Party list indicates that the Labor candidates between them polled 2.7073 quotas.

It will be seen that the leading Labor and Liberal candidates, Hutchins and Heffernan, polled more than the quota. They were therefore elected on the first count. Their surplus votes were then distributed. The surplus is the candidate's vote minus the quota. Hutchins's surplus was thus 1,446,231 minus 536,533, or 909,698. These votes are multiplied by a factor (called the "transfer value") based on the proportion of ballot papers preferencing other parties. ABC Election commentator Antony Green believes that this method distorts preference allocation.[31]

After Hutchins's surplus votes were distributed, the count looked like this:

                     Votes             Total after 
                     distributed       distribution
HUTCHINS                   E              536,533   14.3  ELECTED 1
FAULKNER *           908,567 (99.9)       911,481   24.3  ELECTED 3
Forshaw *                196 (00.0)         1,060   00.0
Stephens                 130 (00.0)         2,681   00.1
Oldfield                 186 (00.0)       359,840   09.6
Burston                    6 (00.0)           576   00.0
O'Regan                    4 (00.0)           789   00.0
HEFFERNAN *                E            1,371,578   36.5  ELECTED 2
Tierney *                 13 (00.0)         1,454   00.0
Macdonald *                1 (00.0)         1,690   00.0
Fierravanti-Wells          1 (00.0)           856   00.0
Ridgeway                 278 (00.0)       272,579   07.3
Baird                      5 (00.0)           462   00.0
Reddy                      3 (00.0)         2,166   00.1
Mendelssohn                4 (00.0)           813   00.0
Sutton                    66 (00.0)        80,139   02.1
Moore                      2 (00.0)           750   00.0
Rhiannon                   1 (00.0)           250   00.0
Russell                    0                  542   00.0
                     909,698            3,755,725

It will be seen that virtually all of Hutchins's surplus votes went to Faulkner, the second candidate on the Labor ticket, who was then elected. This is because all those voters who voted for the Labor party "above the line" had their second preferences automatically allocated to the second Labor candidate. All parties lodge a copy of their How-to-Vote Card with the Electoral Commission, and the Commission follows this card in allocating the preferences of those who vote "above the line." If a voter wished to vote, for example, Hutchins 1 and Heffernan 2, they would need to vote "below the line" by numbering each of the 69 candidates.

In the third count, Heffernan's surplus was distributed and these votes elected Tierney. Faulkner's surplus was then distributed, but these were insufficient to elect Forshaw. Likewise, Tierney's surplus was insufficient to elect McDonald.

After this stage of the count, the remaining candidates in contention (that is, the leading candidates in the major party tickets) were in the following position:

HUTCHINS                                  536,533   14.3  ELECTED 1
FAULKNER *                                536,533   14.3  ELECTED 3
Forshaw *                                 375,587   10.0
Oldfield                                  360,263   09.6
HEFFERNAN *                               536,533   14.3  ELECTED 2
Tierney *                                 536,533   14.3  ELECTED 4
Macdonald *                               300,313   08.0
Ridgeway                                  273,109   07.3
Sutton                                     80,186   02.1

All the other candidates were then eliminated one by one, starting with the candidates with the smallest number of votes, and their votes were distributed among the candidates remaining in contention in accordance with the preferences expressed on their ballot papers. After this process was completed, the remaining candidates were in the following position:

HUTCHINS                                  536,533   14.3  ELECTED 1
FAULKNER *                                536,533   14.3  ELECTED 3
Forshaw *                                 450,446   12.0
Oldfield                                  402,154   10.7
HEFFERNAN *                               536,533   14.3  ELECTED 2
Tierney *                                 536,533   14.3  ELECTED 4
Macdonald *                               357,572   09.5
Ridgeway                                  286,157   07.6
Sutton                                    112,602   03.0

Sutton was then eliminated. 80% of Sutton's preferences went to Ridgeway, giving Ridgeway more votes than McDonald. McDonald was then eliminated, and 93% of his preferences went to Ridgeway, thus giving him a quota and the fifth Senate seat. Ridgeway's surplus was then distributed, and 96% of his votes went to Forshaw, thus giving him a quota and the sixth seat. Oldfield was the last remaining unsuccessful candidate.

A final point needs to be explained. It was noted above that when a candidate polls more votes than the quota, their surplus vote is distributed to other candidates. Thus, in the example given above, Hutchins's surplus was 909,698, or 1,446,231 (his primary vote) minus 536,533 (the quota). It may be asked: which 909,698 of Hutchins's 1,446,231 primary votes are distributed? Are they chosen at random from among his votes? In fact they are all distributed, but at less than their full value. Since 909,698 is 62.9% of 1,446,231, each of Hutchins's votes is transferred to other candidates as 62.9% of a vote: each vote is said to have a transfer value of 0.629. This avoids any possibility of an unrepresentative sample of his votes being transferred. After each count the candidate's progressive total is rounded down to the nearest whole number. This means that a small number of votes are lost by fractionation in the final count.

When a person is appointed Divisional Returning Officer for a seat, his electoral enrolment will be transferred from the electorate where he lives to the one he administers. Normally he will be precluded from voting at an election, but instead will have two special powers; these are:

1. If during the count there are two candidates with equal lowest votes, he can decide which will be excluded.

2. If at the end of the count the two candidates left have an equal number of votes, he will get to vote in the election by giving a casting vote to the candidate he prefers. This is his personal vote, just like any other elector's, and is awarded at his sole discretion.

Senate casual vacancies

If a senator's seat becomes vacant mid-term, through resignation, death or other cause, the legislature of the relevant state or territory chooses a replacement senator. Further details are at Casual vacancies in the Australian Parliament.

Double dissolutions

Under the Australian Constitution, the House of Representatives and the Senate generally have equal legislative powers (the only exception being that appropriation (supply) bills must originate in the House of Representatives). This means that a government formed in the House of Representatives can be frustrated if a Senate majority rejects or delays passage of its legislative bills.

In such circumstances, Section 57 of the Constitution allows the Governor-general to dissolve both the House of Representatives and the Senate–termed a "double dissolution"–and issue writs for an election in which every seat in the Parliament is contested. The Governor-general would usually take such action only on the advice of the prime minister.


Candidates for either house must formally nominate with the Electoral Commission. The signature of the Registered Officer of a party registered under the Electoral Act is required for a party-endorsed candidate. A registered party must have at least 500 members. Fifty signatures of eligible voters are required for an independent candidate. A deposit of $1000 is required for a candidate for the House of Representatives, and $2000 for a candidate for the Senate; this deposit is refunded if the candidate or group gains 4% of the first preference votes. To receive public funding, a party or candidate must receive at least 4% of the vote.[32]


  1. ^ Scott Bennett and Rob Lundie, 'Australian Electoral Systems', Research Paper no. 5, 2007–08, Department of the Parliamentary Library, Canberra.
  2. ^ Scott Bennett, Compulsory voting in Australian national elections, Research Brief No. 6, 2005–06, Department of the Parliamentary Library, Canberra.
  3. ^ a b "Compulsory Voting in Australia" (PDF). Australian Electoral Commission. 16 January 2006. Retrieved 2011-02-04. 
  4. ^ The case for compulsory voting"; by Chris Puplick""". 1997-06-30. Retrieved 2010-06-16. 
  5. ^ "Odgers, Australian Senate Practice". Retrieved 2010-12-29. 
  6. ^ Issues PaperIndependent Review of Local Government Elections: . Retrieved 28 July 2010.
  7. ^ "Electoral Offences". Voting within Australia – Frequently Asked Questions.  
  8. ^ "Section 101(6), Commonwealth Electoral Act 1918". Retrieved 16 September 2012. 
  9. ^
  10. ^ SmartRoll: The NSW Electoral Commission's Automatic Enrolment Project at Electoral Commission NSW
  11. ^ Australian Electoral Commission, Electoral Pocketbook, Australian Electoral Commission, Canberra, June 2006, pp. 71–77. Retrieved September 2007.
  12. ^ a b Derek Chong, Sinclair Davidson,Tim Fry "It's an evil thing to oblige people to vote" Policy vol. 21 No. 4, Summer 2005-06
  13. ^ "Blank vote legitimate, Latham asserts". Retrieved 2010-12-29. 
  14. ^ Burton-Bradley, Robert (2010-08-16). "Latham not breaking the law, says AEC". 
  15. ^ Evans, Tim Compulsory voting in Australia at Australian Electoral Commission official website, June 2006. Accessed 15 June 2013
  16. ^ Adam Carr. "By-Elections 1917-19". Psephos Australian Election Archive. Retrieved 2011-02-10. 
  17. ^ "Australia's major electoral developments". Australian Electoral Commission. Retrieved 2011-02-16. 
  18. ^ "Electronic voting and counting". Australian Capital Territory Electoral Commission. Retrieved 2011-02-16. 
  19. ^ "Preferential Voting". Retrieved 2010-06-16. 
  20. ^ "How the House of Representatives votes are counted". Australian Electoral Commission. 13 February 2013. Retrieved 2 May 2015. 
  21. ^ "Voters stung by back room deals between minor parties". Retrieved 7 May 2015. 
  22. ^ Your vote and the Senate: The Big Switch
  23. ^ "View News Headlines". 2005-05-20. Retrieved 2010-06-16. 
  24. ^ Information Centre for the 2007 Electoral Distribution, Where will you be in 2009?, p2.
  25. ^  
  26. ^ "Voting HOR". 2007-07-31. Retrieved 2010-06-16. 
  27. ^ Adam Carr. "By-Elections 1990-1993". Psephos Australian Election Archive. Retrieved 2011-02-10. 
  28. ^ "Betts, K. – People and Place Vol. 4 No. 4". Retrieved 2010-06-16. 
  29. ^ "2004 Federal Election. Latest Seat Results. Election Results. Australian Broadcasting Corporation". ABC. Retrieved 2010-06-16. 
  30. ^ "Counting the Votes". 2008-02-13. Retrieved 2010-06-16. 
  31. ^ a b "Antony Green's Election Blog: Distortions in the Queensland Senate Count". 2010-09-16. Retrieved 2010-12-29. 
  32. ^ "Candidates – Frequently Asked Questions". Australian Electoral Commission. Retrieved 2013-07-23. 

External links

  • The Parliament of Australia
  • The Australian Electoral Commission
  • Adam Carr's Australian Election Archive
  • Proportional Representation Society of Australia
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.