World Library  
Flag as Inappropriate
Email this Article

Gas-discharge lamp

Article Id: WHEBN0002925786
Reproduction Date:

Title: Gas-discharge lamp  
Author: World Heritage Encyclopedia
Language: English
Subject: Fluorescent lamp, Electric light, High-intensity discharge lamp, Lamp (electrical component), Weather testing of polymers
Collection: Gas Discharge Lamps, Light Sources
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Gas-discharge lamp

Germicidal lamps are simple low-pressure mercury vapor discharges in a fused quartz envelope.

Gas-discharge lamps are a family of artificial light sources that generate light by sending an electrical discharge through an ionized gas, a plasma. Typically, such lamps use a noble gas; (argon, neon, krypton, and xenon) or a mixture of these gases. Some include additional substances, like mercury, sodium, and metal halides, which are vaporized during startup to become part of the gas mixture. In operation the gas is ionized, and free electrons, accelerated by the electric field in the tube, collide with gas atoms. Some electrons in the atomic orbitals of these atoms are excited by these collisions to a higher energy state. When the excited electron falls back to a lower energy state, it emits a photon of light of a characteristic frequency. The color of the light produced depends on the emission spectra of the atoms making up the gas, as well as the pressure of the gas and other variables. Gas discharge lamps can produce a wide range of colors. Some lamps produce ultraviolet radiation which is converted to visible light by a fluorescent coating on the inside of the lamp's glass surface. The fluorescent lamp is perhaps the best known gas-discharge lamp.

Compared to incandescent lamps, gas-discharge lamps offer higher efficiency,[1][2] but are more complicated to manufacture and require auxiliary electronic equipment such as ballasts to control current flow through the gas. Some gas-discharge lamps also have a perceivable start-up time to achieve their full light output. Still, due to their greater efficiency, gas-discharge lamps are replacing incandescent lights in many lighting applications.

Contents

  • History 1
  • Color 2
  • Types 3
    • Low pressure discharge lamps 3.1
    • High pressure discharge lamps 3.2
    • High-intensity discharge lamps 3.3
  • Other examples 4
  • See also 5
  • References 6
  • Further reading 7
  • External links 8

History

The history of gas-discharge lamps began in 1675 when French astronomer Jean-Felix Picard observed that the empty space in his mercury barometer glowed as the mercury jiggled while he was carrying the barometer.[3] Investigators, including Francis Hauksbee, tried to determine the cause of the phenomenon. Hauksbee first demonstrated a gas-discharge lamp in 1705. He showed that an evacuated or partially evacuated glass globe, in which he placed a small amount of mercury, while charged by static electricity could produce a light bright enough to read by. The phenomenon of electric arc was first described by Vasily V. Petrov, a Russian scientist, in 1802; Sir Humphry Davy demonstrated in the same year the electric arc at the Royal Institution of Great Britain. Since then, discharge light sources have been researched because they create light from electricity considerably more efficiently than incandescent light bulbs.

The father of the low-pressure gas discharge tube was German glassblower neon lighting, used in neon signs.

The introduction of the metal vapor lamp, including various metals within the discharge tube, was a later advance. The heat of the gas discharge vaporized some of the metal and the discharge is then produced almost exclusively by the metal vapor. The usual metals are sodium and mercury owing to their visible spectrum emission.

One hundred years of research later led to lamps without electrodes which are instead energized by microwave or radio frequency sources. In addition, light sources of much lower output have been created, extending the applications of discharge lighting to home or indoor use.

Color

Each gas, depending on its atomic structure emits certain wavelengths, its emission spectrum, which determines the color of the light from the lamp. As a way of evaluating the ability of a light source to reproduce the colors of various objects being lit by the source, the International Commission on Illumination (CIE) introduced the color rendering index (CRI). Some gas-discharge lamps have a relatively low CRI, which means colors they illuminate appear substantially different from how they do under sunlight or other high-CRI illumination.

Gas Color Spectrum Notes Image
Helium White to orange; under some conditions may be gray, blue, or green-blue. Used by artists for special purpose lighting.
Neon Red-orange Intense light. Used frequently in neon signs and neon lamps.
Argon Violet to pale lavender blue Often used together with mercury vapor.
Krypton Gray off-white to green. At high peak currents, bright blue-white. Used by artists for special purpose lighting.
Xenon Gray or blue-gray dim white. At high peak currents, very bright green-blue. Used in flashtubes, xenon HID headlamps, and xenon arc lamps.
Nitrogen Similar to argon but duller, more pink; at high peak currents bright blue-white.
Oxygen Violet to lavender, dimmer than argon
Hydrogen Lavender at low currents, pink to magenta over 10 mA
Water vapor Similar to hydrogen, dimmer
Carbon dioxide Blue-white to pink, in lower currents brighter than xenon Used in Carbon Dioxide Lasers.
Mercury vapor Light blue, intense ultraviolet

Ultraviolet not shown

In combination with phosphors used to generate many colors of light. Widely used in mercury-vapor lamps.
Sodium vapor (low pressure) Bright orange-yellow Widely used in sodium vapor lamps.

Types

Lamps are divided into families based on the pressure of gas in the bulb, below. A second distinction used is whether the cathode is heated:

  • Hot-cathode lamps have electrodes which operate at a high temperature, which during operation are heated by the arc current in the lamp. The heat knocks electrons out of the electrodes by thermionic emission, which helps maintain the arc. In many types the electrodes consist of electrical filaments made of fine wire, which are heated by a separate current at startup, to get the arc started.
  • Cold-cathode lamps have electrodes which operate at room temperature. To start conduction in the lamp a high enough voltage (the striking voltage) must be applied to ionize the gas, so these lamps require higher voltage to start.

Low pressure discharge lamps

Low-pressure lamps have working pressure much less than atmospheric pressure. For example, common fluorescent lamps operate at a pressure of about 0.3% of atmospheric pressure.

  • Fluorescent lamps, a heated-cathode lamp, the most common lamp in office lighting and many other applications, produces up to 100 lumens per watt
  • Neon lighting, a widely used form of cold-cathode specialty lighting consisting of long tubes filled with various gases at low pressure excited by high voltages, used as advertising in neon signs.
  • Low pressure sodium lamps, the most efficient gas-discharge lamp type, producing up to 200 lumens per watt, but at the expense of very poor color rendering. The almost monochromatic yellow light is only acceptable for street lighting and similar applications.
  • A small discharge lamp containing a bi-metallic switch is used to start a fluorescent lamp. In this case the heat of the discharge is used to actuate the switch; the starter is contained in an opaque enclosure and the small light output is not used.
Gas-discharge lamp "Candle".
  • Continuous glow lamps are produced for special applications where the electrodes may be cut in the shape of alphanumeric characters and figural shapes.[4]
  • A flicker light bulb, flicker flame light bulb or flicker glow lamp is a gas-discharge lamp which produces light by ionizing a gas, usually neon mixed with helium and a small amount of nitrogen gas, by an electric current passing through two flame shaped electrode screens coated with partially decomposed barium azide. The ionized gas moves randomly between the two electrodes which produces a flickering effect, often marketed as suggestive of a candle flame (see image). US patent 3238408, Kayatt Philip J., "Flicker glow lamps", issued 1966-03-1 

High pressure discharge lamps

High-pressure lamps have a discharge that takes place in gas under slightly less to greater than atmospheric pressure. For example, a high pressure sodium lamp has an arc tube under 100 to 200 torr pressure, about 14% to 28% of atmospheric pressure; some automotive HID headlamps have up to 50 bar or fifty times atmospheric pressure.

  • Metal halide lamps. These lamps produce almost white light, and attain 100 lumen per watt light output. Applications include indoor lighting of high buildings, parking lots, shops, sport terrains.
  • High pressure sodium lamps, producing up to 150 lumens per watt. These lamps produce a broader light spectrum than the low pressure sodium lamps. Also used for street lighting, and for artificial photoassimilation for growing plants
  • High pressure mercury-vapor lamps. This lamp type is the oldest high pressure lamp type, being replaced in most applications by the metal halide lamp and the high pressure sodium lamp. It requires a shorter arc length.

High-intensity discharge lamps

15 kW xenon short-arc lamp used in IMAX projectors

A high-intensity discharge (HID) lamp is a type of electrical lamp which produces light by means of an electric arc between tungsten electrodes housed inside a translucent or transparent fused quartz or fused alumina arc tube. Compared to other lamp types, relatively high arc power exists for the arc length. Examples of HID lamps include:

HID lamps are typically used when high levels of light and energy efficiency are desired.

Other examples

The Xenon flash lamp produces a single flash of light in the millisecond-microsecond range and is commonly used in film, photography and theatrical lighting. Particularly robust versions of this lamp, known as strobe lights, can produce long sequences of flashes, allowing for the stroboscopic examination of motion. This has found use in the study of mechanical motion, in medicine and in the lighting of dance halls.

See also

References

  1. ^ "Types of Lighting". Energy.gov. US Department of Energy. Retrieved 10 June 2013. 
  2. ^ "LIGHTING TECHNOLOGIES: A GUIDE TO ENERGY-EFFICIENT ILLUMINATION" (PDF). Energy Star. US Environmental Protection Agency. Retrieved 10 June 2013. 
  3. ^ See WorldHeritage's article: Barometric light.
  4. ^ http://bulbcollector.com/gateway/Gas_Discharge_Lamps/Neon

Further reading

  • Waymouth, John (1971). Electric Discharge Lamps. Cambridge, MA: The M.I.T. Press.  
  • National Highway Traffic Safety Administration. "Glare from headlamps and other front mounted lamps". Federal Motor Vehicle Safety Standard No. 108. US Department of Transportation. Retrieved 2006-01-23. 

External links

  • Lamps and Indicators at DMOZ
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.