World Library  
Flag as Inappropriate
Email this Article

Lift strut

Article Id: WHEBN0031421745
Reproduction Date:

Title: Lift strut  
Author: World Heritage Encyclopedia
Language: English
Subject: Schneider ESG 31 Schlesierland, Sandlin Goat, Aeronca C-3, Eberman 1930 Monoplane, Cloudcraft Phantom
Publisher: World Heritage Encyclopedia

Lift strut

Lift strut
A Cessna 152 shows its single lift strut, joining the fuselage to the high-mounted wing.

A Lift strut is a structural member that connects the wing on an aircraft with the fuselage, acting in tension and compression to support the wing in flight and on the ground. They are most commonly found on high-wing aircraft, but can be used on any wing configuration.

The lift struts themselves may also be braced by jury struts to prevent lift strut buckling.


Nearly all biplane aircraft have their upper and lower planes connected by interplane struts, which divide the wings into bays braced by diagonal wires. The wires that run outward from the upper to the lower planes resist the distortion on the bay under gravity and are termed landing wires; those from the lower plane outwards to the upper (lift or flying wires) resist bay distortion under the aerodynamic lifting force. The resulting combination of struts and wires is a quite rigid, box girder-like structure independent of its fuselage mountings.

Wire braced biplane with diagonal lift and landing wires
Wire braced monoplane with wires from central mountings to wings
High-wing monoplane with rigid struts below the wings

In contrast, early monoplanes relied entirely on external wire bracing, either directly to the fuselage or to kingposts above it and undercarriage struts below to resist the same forces of lift and gravity. Many later monoplanes have used cantilever wings with their lift bracing within the wing to avoid the drag penalties of external wires and struts, but significant numbers have had, and continue to have, one or more external braces called lift struts for each wing. These are rigid struts rather than wires and so can resist compressive loads as well as extensions.[1]

The placement of these wing struts and the forces acting on them depends chiefly on the wing configuration. They are most common in high-wing aircraft like the Cessna 152 or parasol-wing aircraft like the Consolidated PBY Catalina, running from the wing underside to the lower fuselage longeron or equivalent structure. In flight, these lift struts are in tension from the lift forces. In level flight they convey the weight of the aircraft to the wings. On the ground they are under compression, supporting the wing against gravity. Less commonly, and chiefly in the past, low-winged monoplanes like the Piper Pawnee have had lift struts mounted above the wing, acting in compression in flight and in tension on the ground.

Consolidated Catalina, double parallel strutted parasol wing

Sometimes each wing has just a single lift strut, as on the Cessna 152, but they often come in pairs, sometimes parallel as on the Catalina, sometimes splayed or as V-form pairs (e.g. Auster Autocrat) joined to the fuselage at a single point. Many more complicated arrangements have been used, often with two primary lift struts augmented by auxiliary interconnections known as jury struts between each other or to the wing or the fuselage. Each pair of the inverted V struts of the Pawnee, for example, is assisted by a pair of vertical support struts.[2]

Piper Pawnee V-strutted low wing with additional vertical bracing
Auster Autocrat V-strutted high-wing

From early times these lift struts have been streamlined, often by enclosing metal load bearing members in shaped casings. The Farman F.190, for example, had its high wings joined to the lower fuselage by parallel duralumin tubes enclosed in streamlined spruce fairings[3] and the Westland Lysander used extruded I section beams of light alloy, onto which were screwed a fore and aft pair of duralumin fairings.[4] Later aircraft have had streamlined struts formed directly from shaped metal, like the extruded light alloy struts of the Auster AOP.9,[5] or from composites, for example the carbon fibre lift struts of the Remos GX eLITE.[6] Designers have adopted different methods of improving the aerodynamics of the strut-wing and strut-body, using similar approaches to those used in interplane struts. Sometimes the streamlining is tapered away close to the wing, as on the Farman F.190;[3] other designs have an extended, faired foot, for example the Skyeton K-10 Swift.[7]

Some designs have combined lift struts with engine mountings, for example the Westland IV[8] and with undercarriage struts, as on the Scottish Aviation Twin Pioneer.[9]

Lift struts have a clear primary structural role but are sometimes also used to position devices like pitot heads and wind driven generators in a region of clear airflow, following the similar use of interplane struts in biplanes.

Lift struts are no longer used by large or fast aircraft in current production because of the drag penalties, but remain common on small (2/4-seat) high-wing light aircraft in the ULS and LSA categories. Not all current strut braced aircraft are small: the Pilatus Porter STOL aircraft, which first flew in 1960 and seats up to 10 passengers,[10] remains in production[11] and the de Havilland Twin Otter, a 19-seater[12] has recently (2008) returned to production.[13]


  1. ^ Kumar, Bharat (2005). An Illustrated Dictionary of Aviation. New York: McGraw Hill.  
  2. ^ Taylor, John W R (1966). Jane's All the World's Aircraft 1966-67. London: Sampson Low, Marston & Co. Ltd. p. 309. 
  3. ^ a b Barrière, Michael. "The Farman 190 and its derivatives". Air-Britain Archive (December 2010): p.187. 
  4. ^ James, Derek (1991). Westland Aircraft since 1915. London: Putnam Publishing. p. 236.  
  5. ^ Bridgman, Leonard (1956). Jane's All the World's Aircraft 1956-57. London: Jane's All the World's Aircraft Publishing Co. Ltd. p. 47. 
  6. ^ "New Remos GX eLITE". 13 April 2011. Retrieved 2011-04-15. 
  7. ^ Jackson, Paul (2010). Jane's All the World's Aircraft 2010-11. Coulsdon, Surrey: IHS Jane's. pp. 613–4.  
  8. ^ Jackson, A.J. (1960). British Civil Aircraft 1919-59 2. London: Putnam Publishing. p. 327. 
  9. ^ Jackson, A.J. (1960). British Civil Aircraft 1919-59 2. London: Putnam Publishing. p. 227. 
  10. ^ Simpson, Rod (2001). Airlife's World Aircraft. Shrewsbury: Airlife Publishing Ltd. p. 427.  
  11. ^ "Pilatus PC-6". Retrieved 2011-04-14. 
  12. ^ Simpson, Rod (2001). Airlife's World Aircraft. Shrewsbury: Airlife Publishing Ltd. p. 186.  
  13. ^ "de Havilland Twin Otter Series 400". Retrieved 2011-04-15. 
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.