World Library  
Flag as Inappropriate
Email this Article

Mint-made errors

Article Id: WHEBN0000344151
Reproduction Date:

Title: Mint-made errors  
Author: World Heritage Encyclopedia
Language: English
Subject: Brockage, Glossary of numismatics, Numismatics/Numismatic terminology, Mint-made errors, Nummus
Collection: Coins, Mint-Made Errors
Publisher: World Heritage Encyclopedia

Mint-made errors

1999 Lincoln cent depicting wavy steps.

Mint-made errors are errors in a coin made by the mint during the minting process. Groups of coins with distinctive characteristics are known as varieties. The term variety applies to coins with both intended and unintended differences while the term error refers only to coins with unintended differences. Nevertheless, not all errors are varieties. Although there may be many identical examples of a some errors, others are unique. For example, there may be many indistinguishable examples of coins with a specific die crack, while off-center strikes tend to be unique. Being unique does not mean that an error is valuable. Although no other coin may be identical to a coin with an off-center strike, off-center strikes happen often enough that buyers can choose from many examples each of which varies slightly from the other.

Mint error coins can be the result of deterioration of the minting equipment, accidents or malfunctions during the minting process, or intentional interventions by mint personnel.[1] Accidental error coins are perhaps the most numerous and in modern minting are usually very rare, making them valuable to numismatists. Intentional intervention by mint personnel does not necessarily include a deliberate attempt to create an error, but usually involves an action intended to improve quality that miscarries and creates error coins instead. Errors can be the result of defective planchets, defective dies or the result of mistakes made during striking. The planchet, die, and striking (or PDS) classification system happens to correspond with the mintmarks of the three largest U. S. mints, Philadelphia, Denver, and San Francisco. Not all errors fall neatly within the categories. Sometimes design elements are missing from coins because dies crevices are filled with grease. Labels used to identify specific categories of errors sometimes describe the cause of the error (die crack, rotated die, clipped planchet). Other errors names describe what the viewer sees when looking at the coin (wavy steps, trails, missing element) while others have names that were adapted for use (mule, cud, brockage). The result is that some errors are known by multiple names. Filled die errors are also known as missing design element errors and as strike throughs. As is noted below under the discussion of missing design element coins, some errors have multiple causes.

Authentic error coins should not be confused with coins that damaged after being minted, which is known as post-mint damage (PMD) or post-strike damage (PSD).


  • Planchet preparation errors 1
    • Blank planchet 1.1
    • Clipped planchet 1.2
    • Improper planchet thickness 1.3
    • Lamination flaw 1.4
    • Cladding flaw 1.5
  • Hub and die errors 2
    • Fundamental die-setting error 2.1
    • Missing design elements 2.2
    • Doubled die 2.3
    • Die cracks, die breaks, and die chips 2.4
    • Die clash 2.5
    • MAD clash 2.6
    • Punching errors 2.7
    • Overdates and over mintmarks 2.8
    • Trails 2.9
    • Wavy steps 2.10
    • Mule 2.11
    • Misaligned dies 2.12
  • Strike errors 3
    • Broadstrike 3.1
    • Strike through 3.2
    • Uni-face coin 3.3
    • Brockage 3.4
    • Die cap 3.5
    • Edge strike 3.6
    • Multiple strike 3.7
    • Off-center strike 3.8
    • Double denomination 3.9
    • Struck on wrong planchet 3.10
    • Edge and Rim Errors 3.11
    • Mated pair or set 3.12
  • Numismatic value of error coins 4
  • Notable Australian coin varieties and errors 5
  • Notable U.S. coin varieties and errors 6
  • Terms 7
  • See also 8
  • References 9
  • External links 10

Planchet preparation errors

Mints purchase long strips of metal which are fed through blanking machines that punch out disks known as blank planchets (or simply as planchets or blanks)[2] on which coins are struck. This determines the size and shape of eventual coins.

Dime type-one blank and one cent type-two blank

Blank planchet

The punched disks are first known as "type-1 blanks (or planchets)". The disks are called "type-2 blanks (or planchets)" after an upending mill adds uniform, rounded rims. Type-2 blanks may also be considered striking errors as they are prepared correctly, but are released without having been struck.

Clipped planchet

Clipped planchet

A misfeed can occur when the metal strip is fed through the blanking machine. The punches sometimes overlap the leading edge of the metal producing a straight clip. Sometimes, the punches strike an area of the strip which overlaps the hole left by the previous strike producing a curved clip. Sometimes punches strike the irregular trailing edge of the metal strip producing irregular clips.

Improper planchet thickness

Coins are sometimes struck on planchets that are either too thin or too thick producing underweight or overweight coins. This can be because the equipment settings cause the metal strip to be rolled to an incorrect thickness or because the metal strip was intended for another coin denomination such as a quarter planchet cut from metal roll intended for dimes.

Lamination crack

Lamination flaw

A lamination flaw is a planchet defect that results from metal impurities or internal stresses. Lamination flaws cause discoloration, uneven surfaces, peeling, and splitting.

Peeled cladding

Cladding flaw

Many modern coins are made of layers of different metals known as clads. These cladding layers sometimes peel, fold, or completely separate.

Hub and die errors

Mints use hubs bearing raised images similar to the images that appear on a coin to imprint indented images onto steel rods. Those rods become the dies which strike planchets making them into coins.

Hub and die errors can occur at the time dies are made, when the dies are installed into presses, and from die deterioration during use. Modern coins are still released with hub and die errors, mainly because the defects are usually too small to be seen with the naked eye. A few exceptions exist, where the dies are used despite producing obvious flaws. The 1955 Lincoln cent is an example.

Fundamental die-setting error

A fundamental die-setting error occurs when the die is not set as the producers intended. For example, in April 2013 the Central Bank of Ireland issued a silver €10 commemorative coin in honour of James Joyce that misquoted a famous line from his masterwork Ulysses[3] despite being warned on at least two occasions by the Department of Finance over difficulties with copyright and design.[4]

Partial date likely caused by filled die

Missing design elements

Missing mintmarks, dates, and other design elements are not distinct errors, but rather are what the observer sees when viewing other error types. A design element that is missing from the die when it is made is a fundamental error. Missing design elements that occur because dies are tilted and do not strike the planchet face-on are known as misaligned dies. A design element may be missing because foreign matter such as grease plugs the cavity into which the planchet's metal flows under the striking pressure. This error is also known as a filled die and as a strike through. Although this does involve a die, it is typically thought of as a striking error, but is included here so as to provide a more complete list.

Doubled die

Doubling on LIBERTY from the 1995 doubled die Lincoln cent

A doubled die occurs when a die receives an additional, misaligned impression from the hub. Overdate coins such as the 1942/1 Mercury dime and 1918/7 buffalo nickel are also doubled dies. They are both listed in the CONECA files as class III doubled dies. Class III means the die was hubbed with different "designs" (or hubs that had different dates). They are not repunched dates, since the dates were punched onto the hub.

A die crack is seen to the left of Lincoln's head
Broken die resulting in a "cud" atop Jefferson's head

Die cracks, die breaks, and die chips

cuds. Occasionally, an area of a die will chip out of the center. These so-called die chips appear on subsequently struck coins as raised, rounded, unstruck areas called die chips.

The marks seen above the word LIBERTY were caused by the obverse die clashing with elements on the reverse die intended to impress the space between the memorial columns

Die clash

A die clash occurs when the obverse and reverse dies are damaged upon striking each other without a planchet between them. Due to the tremendous pressure used, parts of the image of one die may be impressed on the other. Planchets subsequently struck by the clashed dies receive the distorted image. A well-known example is the "Bugs Bunny" Franklin half dollar of 1955, where part of the eagle's wing from the reverse gives Franklin the image of protruding teeth.[5]

MAD clash

1993 MAD clash mark on a U.S. cent

A MAD clash occurs when an obverse and reverse die strike each other while misaligned in relation to each other. Additional misalignment errors are discussed below.

Double punched mintmark

Punching errors

Historically, some design elements near the outer perimeter of a die were added by punching because technology made it difficult to press both central and perimeter design elements at the same time. Also, some dies were made without mintmarks or dates to permit their use at different mints and in later years. A die technician added missing elements by positioning a punch, a small steel rod with a letter or number on it, and striking the punch with a hammer pressing the image into the die. If the image is not strong enough, the technician will punch it a second time. Punches placed in a different position between strikes will produce a doubled image which called a repunch.[6] Dual punches occur when punching is repeated in a second location. Sometimes technicians use a punch with the wrong or incorrectly sized letter or number. A well known example of a small mint mark is 1945-S "Micro S" Mercury dime, when the mint used an old puncheon intended for Philippines coins.[7] A much rarer example is the 1892-O "Micro O" Barber half dollar, which may have come about from the brief use of a mintmark puncheon intended for the quarter.[8] Exactly the same error occurred with the 1905-O Barber dime, although numerous examples are known of this mistake. Modern equipment virtually eliminates the need to design elements by punching.

Overdates and over mintmarks

In the past, mints used dies until they broke. At the beginning of the year, mints punched a new date over the old on dies that were in use. For 19th-century coins, it is difficult to call an overdate an "error", as it resulted from intentional recycling of the die. An overCarson City Mint to the New Orleans Mint, where they were given an "O". A similar case occurred in 1938, when a reverse die for the buffalo nickel was made for the San Francisco Mint, because that year only, the Denver Mint made these coins with a "D" punched over the "S".


Lines, called trails, transfer to coins from dies made using the modern high pressure “single pressing” process. When images are impressed into dies using the process, the displaced metal moves out into fields leaving visible lines on the dies. The dies themselves are called trail dies. Coins on which the lines appear are simply called trails.

Wavy steps

Trails (defined above) were first noted on Lincoln Memorial steps found on the reverse of one cent coins minted from 1959 to 2008. The trails gave the steps the appearance of being wavy. The term wavy steps is still used to refer to trails found on the memorial steps, but the term trails is more commonly used to refer to lines found elsewhere. See image at the beginning of this article.


a coin struck using dies never intended for use together is called a "mule." An example is a coin struck with dies designed for different coin denominations.

Because of misalignment, the observe of this coin is off-center but the reverse is centered

Misaligned dies

Dies must be properly aligned in presses for coins to be struck correctly. Errors occur when dies are offset, tilted, or rotated. Offset errors occur when hammer die is not centered over the anvil die typically resulting in an off-centered observe, but centered reverse. Tilting errors occur when die surfaces are not parallel producing coins that are thinner along one edge, and sometimes causing missing design elements along the opposite edge because of insufficient pressure being exerted on that edge. The absence of a blank between striking tilted dies produces a MAD die clash (discussed above). Rotation errors occur when the images on the observe and reverse dies are turned from the normal positions such as when the reverse image is at a right angle to the obverse.

Strike errors

Strike errors occur when the planchet is struck. It is a fault in the manufacturing process rather than in either the die or the planchet. Numismatists often prize strike-error coins over perfectly struck examples, which tend to be more common, but less highly than die-error coins, which are usually rarer, making them valuable.

This broad struck Lincoln cent is the size of a nickel


Broadstrike errors are produced when the collar die (the circular die surrounding the lower die) malfunctions. The collar prevents the metal of the blank from flowing outside the confines of the die. All denominations of U.S. coins with a broadstrike have plain edges.

Strike through

A "strike-through" coin is made when another object comes between a blank and a die at the time of striking. That object's outline is pressed into the blank's surface. Common examples include hard objects such as staples, metal shavings, and other coins as well as soft objects such as cloth and grease. Hard objects leave sharp outlines and, on occasion, adhere to the blank producing a coin called a "retained strike-through". A planchet "struck-through" a coin is left with an impression of the coin called brockage (discussed below). When the “strike-through object is a blank planchet the result is a uni-face coin with one struck side and one blank side (see below). When the "struck-through" object is another coin, and that coin adheres to a die(as opposed to the other coin), the adhered coin is called a "die cap" (discussed below). Two coins which adhere to one another are called "bonded pairs". Softer objects, such as grease, can fill crevices in a die, producing a weak strike with a smudged appearance. These errors are often called "missing element coins" (discussed above and as "filled dies."(A great example of such an error occurred in 1922, when only the Denver mint struck Lincoln cents. The dies were so covered in grease, because the mint had to speed up production, that the mintmark was obscured and therefore either nonexistent or weakened on the 1922 cents. These are very popular with collectors.[9])

Uni-face coin (blank reverse)

Uni-face coin

A uni-face coin results when two planchets are stacked one atop the other at the time of striking. This produces two coins one with only an obverse image and a second with only the reverse image. The planchets may be centered over the die producing one complete image on each coin or off-centered producing partial images on each side. In the accompanying image of the blank reverse, the shadow or outline of Lincoln's profile from the observe side of the coin is visible.

The brockage image of the Lincoln memorial can be seen near the bottom of the coin


Brockage occurs when a mirror image of a coin is struck on a blank. After a struck coin fails to eject, a new blank is fed between the struck coin and the hammer die. The hammer die strikes the second blank leaving its image on one side while pressing the blank against the previously stuck coin which sinks its image into opposite side. Most brockages are off-center, but fully overlapping brockages are the most desirable.

Die cap

Die cap

A struck coin remains on a die and leaves its slowly fading impression (called brockage) on subsequently struck coins and, over time, changing shape to resemble a bottle cap.

Edge strike

There are two types of edge strikes. A standing edge strike occurs when a blank "bounces" so that it is standing on edge as it is struck. Striking pressure produces edge indentations where the dies strike, and sometimes bends the blanks. Repeated strikes can produce a coin that is folded flat. Struck coins can also "bounce" resulting in standing edge struck coins. Chain edge strikes occur when two blanks are fed into the space between dies at the same time. The blanks expand when struck and press together leaving each with single indented edge. Two chain edge struck coins together are known as a matched pair.

Lincoln cent with second off-center strike
Flip-over multi-struck coin

Multiple strike

A multiple strike, also referred to as a double exposure, occurs when the coin has additional images from being struck again, off center. The result is sometimes mistaken as being a "doubled die". On occasion, a coin will flip-over between strikes so that the second image is that of the opposite side of the coin.

Lincoln cent struck off-center

Off-center strike

An off-center coin is produced when the coin is struck once, albeit off center. Unlike a broadstrike, the punch is not in the center of the coin, but rather the edge. This results in a coin which is not circular. The coin gives a freakish appearance as a result, and various amounts of blank planchet space are visible. The coins can vary in value because of how far off center they are struck, although coins with full dates are more desirable than coins without a date or missing digits.[10]

Double denomination

A double denomination coin is one that has been struck twice between different denomination dies such as once between nickel dies and again between quarter dies. The term is sometimes used to refer to a coin struck on the wrong planchet (see below).

Nickel struck on one cent planchet

Struck on wrong planchet

Sometimes planchets for one coin denomination are fed into a coin-stamping press equipped with dies of another denomination. This results in a coin that has been stamped with a design intended for a differently sized coin. The resulting errors are prized by collectors, though they are usually caught during the manufacturing process and destroyed. Such errors are sometimes called "double denomination" coins, but that term is also used to refer to coins struck a second time with dies of a different denomination.

Some examples include cents struck on dime planchets, nickels on cent planchets, or quarters on dime planchets. This type of error should not be confused with the much rarer mule which is a coin struck between dies that were never intended to be used together such as a coin with nickel obverse and a dime reverse.

Wrong-planchet errors may also occur when the composition of the coin changes. Such situations generally arise when the mint has decided to change the alloy or plating of the coin in the new coinage year, but a few planchets from the previous year—and thus of the previous composition—have yet to be struck. Should the dies be changed for the new year while the old planchets are awaiting striking and not removed, coins using the old composition will be struck with the new year's date. Such coins are rare and often highly valued by collectors, as with the 1943 copper cents and 1944 steel cents.

A much rarer error is a denomination struck on a foreign planchet. This did occur occasionally with United States (and before that American colonial) coinage in the 17th, 18th, and 19th centuries, and then very rarely in the 20th century.

Wire rim

Edge and Rim Errors

Blanks are surrounded by collars when struck to prevent the blank from flattening and spreading. Edge and rim errors occur when collars are either out of position or are deteriorated. A wire rim occurs when excessive pressure squeezes out metal between the collar and the edge of the die producing an extremely high thin rim. A partial collar occurs when an out-of-position collar leaves a line around the coin which is visible when looking at its edge. A partial collar is sometimes called a railroad rim when a reeded edge coin is involved as the line resembles a rail and the reeds resemble railroad ties.

Mated pair or set

A collection of two or more coins struck at the same time or during successive strikes on one or more dies, these coins with the resulting errors are related to one another, fitting together as a set.[11] All brockages, indents, chain edge strikes, and capped die strikes have a corresponding coin, but are rarely found together. A single coin of the set may be discovered by mint staff during quality control and removed, or the coins may be separated into different lots to be distributed separately into circulation.

Numismatic value of error coins

Like other coins, the value of errors is based, in part at least, on rarity and condition. In general, lower denomination errors are less expensive than higher denomination errors simply more such coins are minted resulting in available errors. Modern errors are generally less expensive than older errors simply because, with billions being struck, errors are made. Because of modern technology, some types of errors are less likely to occur now, but that has not seemed to have a dramatic impact on values. Some types of errors, such as clipped planchets, edge strikes, and foreign object strike-throughs can be faked perhaps keeping down the value of some types of mint errors. Many errors are sold ungraded because of their relatively low value. Grading services often charge more to grade a coin than it is worth. Errors are often not noted by grading services. Overdates, mules, brockage, double denomination, and struck on the wrong planchet errors are often valuable. Errors on ancient, medieval, and higher-value coins are usually detrimental to the coin's numismatic value.

Notable Australian coin varieties and errors

  • 1966 "Wavy 2" 20 cents
  • 1979 "Double Bar" 50 cents
  • 1980 "Double Bar" 50 cents
  • 1981 "3-1/2 claw" 20 cents
  • 1994 "Wide Date" 50 cents
  • 2000 "Incused Flag" Millennium 50 cents
  • 2000 $1/10cent Mule
  • 2001 rotated die Centenary of Federation $1
  • 2004 "Pointy A" Large Head 20 cents

Notable U.S. coin varieties and errors

Notable British Coin errors

1983 "New Pence" two pence 2005 "Pemember" two pound 2008 "Dateless" twenty pence 2011 "Aquatics" fifty pence


  • Blank. A round piece of metal on which a coin can be struck. Type 1 blanks have a smooth edge, but type 2 blanks have an upended edge. See Planchet.
  • Die. A steel rod used to strike coins. It bears a negative image of the coin design to be struck.
  • Planchet. A round piece of metal on which a coin can be struck. Type 1 planchets have a smooth edge, but type 2 planchets have an upended edge. See Blank.
  • PUP. Pick Up Point. The area on the coin that shows the most prominent effects of the error. Normally used to describe hub and die errors.

See also


  1. ^ Herbert, Alan. Official Price Guide to Mint Errors. New York: House of Collectibles, 2007. 7th ed. p. 2. Print.
  2. ^ "Royal Mint. (2010). "Making the Coins in Your Pocket." Retrieved 5 November 2010 . Para. 2 and 3. Web". Archived from the original on 6 November 2010. Retrieved 2012-04-04. 
  3. ^ "Error in Ulysses line on special €10 coin issued by Central Bank". RTÉ News. 10 April 2013. 
  4. ^ "Bank alerted to Joyce coin risk". Evening Herald. 25 May 2013. 
  5. ^ "1955 "Bugs Bunny" Franklin Half Dollar". 2012-03-27. Retrieved 2012-04-04. 
  6. ^ "Wexler, John. (2010). "Repunched Mint Marks (RPMs) & Over Mint Marks (OMMs)." Retrieved 6 Nov. 2010". Retrieved 2012-04-04. 
  7. ^ "1945-S Micro S". 2005-01-09. Retrieved 2012-04-04. 
  8. ^ "1892-O BARBER HALF DOLLAR". Retrieved 2012-04-04. 
  9. ^ "1922 Weak D and No D Lincoln Cent Varieties". Retrieved 2013-10-25. 
  10. ^ "Lincoln Cents with Off-Center strikes". Retrieved 2013-10-25. 
  11. ^ "1979 Canadian 1-Cent Mated Set". CoinTalk. Retrieved 2014-06-15. 

External links

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.