World Library  
Flag as Inappropriate
Email this Article

Nissen hut

Article Id: WHEBN0000501564
Reproduction Date:

Title: Nissen hut  
Author: World Heritage Encyclopedia
Language: English
Subject: Quonset hut, Barracks, Great North Road, Gibraltar, Hopper hut, Hut
Collection: Barracks, Iron and Steel Buildings, Military Equipment of World War II, Prefabricated Houses
Publisher: World Heritage Encyclopedia

Nissen hut

Nissen Huts, Cultybraggan Camp, close to Comrie, in west Perthshire

A Nissen hut is a prefabricated steel structure, made from a half-cylindrical skin of corrugated steel. Originally designed during World War I by engineer and inventor Major Peter Norman Nissen, it was used extensively during World War II.


  • Description 1
  • History 2
  • Use as family housing 3
  • Main Roads Migrant Camp, Narrogin 4
  • See also 5
  • Other images of Nissen huts 6
  • References 7
  • External links 8


Nissen hut on Island road, in the process of the roof being removed. Near Fockerby, North Lincolnshire

A Nissen hut is made from a sheet of metal bent into half a cylinder and planted in the ground with its axis horizontal. The cross-section is not precisely semi-circular, as the bottom of the hut curves in slightly. The exterior is formed from curved corrugated steel sheets 10 feet 6 inches by 2 feet 2 inches (3.2 × 0.7 m), laid with a two-corrugation lap at the side and a 6 inch (15 cm) overlap at the ends. Three sheets cover the arc of the hut (about 54 sheets in all are required). These are attached to five 3 × 2 inch (7.5 x 5 cm) wooden purlins and 3 × 2 inch wooden spiking plates at the ends of the floor joists.

The purlins are attached to eight T-shaped ribs (1¾ × 1¾ × ⅛ inch; 4.5 × 4.5 × 0.5 cm) set at 6 feet 0.5 inch (1.8 m) centres. Each rib consists of three sections bolted together using splice plates, and each end is bolted to the floor at the bearers. With each rib are two straining wires, one on each side, and a straining ratchet (or in some cases a simple fencing wire strainer). The wires are strained during construction. The straining wires do not appear in the original Nissen patent.

The purlins are attached to the ribs using a "hook" bolt, which hooks through a pre-drilled hole in the rib and is secured into the purlin. The hook bolt is a unique feature of the Nissen design.

Interior lining could be horizontal corrugated iron or material like Masonite attached to the ribs. Sometimes corrugated asbestos cement sheeting is used.[1] The roof and lining form a circular space with a radius of 8 feet 0.5 inch (2.4 m), although, because of the inward curve, the floor is only 15 feet 10 inches (4.8 m). The space between the interior and exterior lining may be used for insulation and services, if required.

The walls and floors rest on foundations consisting of 4 × 4 inch (10 × 10 cm) stumps with 15 × 9 inch (38 × 23 cm) sole plates. On these are 4 × 3 inch (10 × 8 cm) bearers and 4 × 2 inch (10 × 5 cm) joists at 2 feet 10 inch (86 cm) centres. The floor is made from tongue and groove floorboards. At East Hills and at Villawood the floor is concrete; the ribs in this case were simply attached to the concrete slab by a metal strap.

At either end the walls are made from a wooden frame with weatherboards nailed to the outside.

Windows and doors may be added to the sides by creating a dormer form by adding a frame to take the upper piece of corrugated iron and replacing the lower piece with a suitable frame for a door or window.

Nissen huts come in three internal spans — 16 ft (4.9 m), 24 ft (7.3 m) or 30 ft (9.2 m). The longitudinal bays come in multiples of 6 ft (1.83 m).[2] The corrugated steel half-circles used to build Nissen huts can be stored efficiently, because the curved sheets can be cupped one inside another.

However, there is no standard model of Nissen huts, as the design was never static but changed according to demand.[1]


Between 16 and 18 April 1916, Major Peter Norman Nissen of the 29th Company Royal Engineers of the British Army began to experiment with hut designs. Nissen, a mining engineer and inventor, constructed three prototype semi-cylindrical huts. The semi-cylindrical shape was derived from the drill-shed roof at Queen's University, Kingston, Ontario (collapsed 1896). Nissen’s design was subject to intensive review by his fellow officers, Lieutenant Colonels Shelly, Sewell and McDonald, and General Clive Gerard Liddell, which helped Nissen develop the design. After the third prototype was completed, the design was formalized and the Nissen hut was put into production in August 1916. At least 100,000 were produced in World War I.[3]

Nissen patented his invention in the UK in 1916 and patents were taken out later in the United States, Canada, South Africa and Australia. Nissen received royalties from the British government, not for huts made during the war, but only for their sale after the conflict. Nissen received some £13,000 and was awarded the DSO (Distinguished Service Order).

Two factors influenced the design of the hut. First, the building had to be economical in its use of materials, especially considering wartime shortages of building material. Second, the building had to be portable. This was particularly important in view of the wartime shortages of shipping space. This led to a simple form that was prefabricated for ease of erection and removal. The Nissen hut could be packed in a standard Army wagon and erected by six men in four hours. The world record for erection was 1 hour 27 minutes.[4]

One of many Nissen huts covered with earth and used for munition storage during World War II. Charles Darwin National Park, Darwin, NT, Australia, 2006

Production of Nissen huts waned between the wars, but was revived in 1939. Nissen Buildings Ltd. waived its patent rights for wartime production during World War II (1939-45). Similar-shaped hut types were developed as well, notably the Romney hut in the UK and the Quonset hut in the United States. All types were mass-produced in the thousands. The Nissen hut was used for a wide range of functions; apart from accommodation, they functioned as churches and bomb stores among other uses.[5] Accounts of life in the hut generally were not positive. Huts in the United Kingdom were frequently seen as cold and draughty, while those in the Middle East, Asia and the Pacific were seen as stuffy and humid.

Although the prefabricated hut was conceived to meet wartime demand for accommodation, similar situations, such as construction camps, are places where prefabricated buildings are useful. The Nissen hut was adapted into a prefabricated two-storey house and marketed by Nissen-Petren Ltd. The standard Nissen hut was often recycled into housing.[6] A similar approach was taken with the U.S. Quonset hut at the end of World War II, with articles on how to adapt the buildings for domestic use appearing in Home Beautiful and Popular Mechanics.

However, the adaptation of the semi-cylindrical hut to non-institutional uses was not popular. Neither the Nissen, nor the Quonset developed into popular housing, despite their low cost. One reason was the association with huts: a hut was not a house, with all the status a house implies. The second point was that rectangular furniture does not fit into a curved-wall house very well, and, thus, the actual usable space in a hut might be much less than supposed.

In the UK, after the Second World War many were converted to agricultural or other functions, and numerous examples have since been demolished.[1]

In Australia, after World War II, Nissen huts were erected at many migrant camps around the country.

Use as family housing

Most post World War II Nissen huts were used by governments. However there is one block that was built as private housing. 50 Nissen huts were constructed in North Belmont, a suburb of Newcastle in New South Wales, Australia after World War II. They were designed to provide cheap, ready-made housing for post-war British migrants families.[7] While 17 of the huts were eventually demolished, the remainder have been refurbished, improved and extended over time, and remain popular with their owners. Currently, there are attempts to have the remaining cluster of huts declared as a conservation area,[8] with the objective of assisting in their preservation.

Main Roads Migrant Camp, Narrogin

The story of Western Australia's post-World War II migrants has been marked with the State heritage-listing of the former Main Roads Migrant Camp in Narrogin, Western Australia. The camp housed European migrants who had been displaced by the war and resettled in WA. The Australian Government worked with the United Nations to accept, resettle and provide employment for many thousands of Europeans after World War II.

The camp's conditions were basic, with migrants living in tents and Nissen Huts. These Nissen Huts are the only remaining ones, in their original location, known for their historical use as temporary migrant accommodation. Main Roads was one of three migrant camps set up in Narrogin in the late 1940s and used until the mid-1950s. Post-war migrants played a vital role in the development of the State through the construction of State and local government buildings, roads and railways. Today, the place is used by Main Roads Western Australia as their Wheatbelt South Region Headquarters.[9]

See also

Other images of Nissen huts


  1. ^ a b c BR_NissenHut_HartwellLodge_MoorLane_Roughton.pdf "Historic Building Survey Of A Nissen Hut, Hartwell Lodge, Moor Lane, Roughton, Lincolnshire" (PDF). Retrieved 14 November 2012. 
  2. ^ Brown, Ian; et al. (1995). 20th century defenses in Britain: an introductory guide. Council for British Archeology.  
  3. ^ McCosh 1997:82-108
  4. ^ McCosh 1997:108
  5. ^ See Francis 1996, Innes 1998, 2000, Pullar 1997
  6. ^ (McCoash 1997:121-123)
  7. ^ "Migrant Hostels". Retrieved 14 November 2012. 
  8. ^ "Nissen Huts at Belmont"
  9. ^ State Heritage Office. "Register of Heritage Places", Western Australia.
  • Engineer in Chief (Army). 1966. Handbook of Nissen Huts: 16'0" and 24' 0" Span, issued December 1944, Revised March 1966 Army Code No 14867. (Probably a British Army publication).
  • Francis, P. 1996. British Military Airfield Architecture: from Airships to the Jet Age. Yeovil: Patrick Stephens Limited.
  • Innes, G.B. 1995. British Airfield Buildings of the Second World War. Earl Shinton: Midland Publishing Limited
  • Innes, G.B. 2000. British Airfield Buildings Volume 2: The Expansion & Inter-War Periods. Hersham: Midland Publishing.
  • McCosh, F. 1997 Nissen of the Huts: A biography of Lt Col. Peter Nissen, DSO. Bourne End: B D Publishing.
  • Pullar, M. 1997. Prefabricated WWII Structures in Queensland. Report to National Trust of Queensland.
  • Stuart, I.M. 2005 Of the Hut, I bolted: A preliminary account of prefabricated semi-cylindrical huts in Australia. Historic Environment, Vol 19(1):51-56.
  • Sydney Morning Herald:

External links

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.