World Library  
Flag as Inappropriate
Email this Article


Article Id: WHEBN0004520673
Reproduction Date:

Title: Rapidity  
Author: World Heritage Encyclopedia
Language: English
Subject: List of mathematical topics in relativity, Vladimir Karapetoff, Unit hyperbola, Proper acceleration, Strangeness production
Collection: Special Relativity
Publisher: World Heritage Encyclopedia


In relativity, rapidity is an alternative to speed as a measure of motion. On parallel velocities (say, in one-dimensional space) rapidities are simply additive, unlike speeds at relativistic velocities. For low speeds, rapidity and speed are proportional, but for high speeds, rapidity takes a larger value. The rapidity of light is infinite.

Using the inverse hyperbolic function tanh−1, the rapidity φ corresponding to velocity v is φ = tanh−1(v / c). For low speeds, φ is approximately v / c. The speed of light c being finite, any velocity v is constrained to the interval c < v < c and the ratio v/c satisfies −1 < v / c < 1. Since the inverse hyperbolic tangent has the unit interval (−1, 1) for its domain and the whole real line for its range, the interval c < v < c becomes mapped onto −∞ < φ < ∞.

Mathematically, rapidity can be defined as the hyperbolic angle that differentiates two frames of reference in relative motion, each frame being associated with distance and time coordinates.



In 1908 Hermann Minkowski explained how the Lorentz transformation could be seen as simply a hyperbolic rotation of the spacetime coordinates, i.e., a rotation through an imaginary angle, and this angle therefore represents (in one spatial dimension) a simple additive measure of the velocity between frames.[1] Minkowski's angle of rotation was given the name "rapidity" in 1911 by Alfred Robb, and this term was adopted by many subsequent authors, such as Varićak (1912), Silberstein (1914), Eddington (1924), Morley (1936) and Rindler (2001).

In one spatial dimension

The rapidity φ arises in the linear representation of a Lorentz boost as a vector-matrix product

\begin{pmatrix} c t' \\ x' \end{pmatrix} = \begin{pmatrix} \cosh \varphi & - \sinh \varphi \\ - \sinh \varphi & \cosh \varphi \end{pmatrix} \begin{pmatrix} ct \\ x \end{pmatrix} = \mathbf \Lambda (\varphi) \mathbf v.

The matrix Λ(φ) is of the type \begin{pmatrix} p & q \\ q & p \end{pmatrix} with p and q satisfying p2q2 = 1, so that (p, q) lies on the unit hyperbola. Such matrices form a multiplicative group.

It is not hard to prove that

\mathbf{\Lambda}(\varphi_1 + \varphi_2) = \mathbf{\Lambda}(\varphi_1)\mathbf{\Lambda}(\varphi_2).

This establishes the useful additive property of rapidity: if A, B and C are frames of reference and they all lie on the same straight line, then

\varphi_{AC}= \varphi_{AB} + \varphi_{BC}

where φPQ denotes the rapidity of a frame of reference Q relative to a frame of reference P. The simplicity of this formula contrasts with the complexity of the corresponding velocity-addition formula.

The Lorentz factor identifies with cosh φ:

\gamma = \frac{1}{\sqrt{1 - v^2 / c^2}} \equiv \cosh \varphi,

so the rapidity φ is implicitly used as a hyperbolic angle in the Lorentz transformation expressions using γ and β.

Proper acceleration (the acceleration 'felt' by the object being accelerated) is the rate of change of rapidity with respect to proper time (time as measured by the object undergoing acceleration itself). Therefore the rapidity of an object in a given frame can be viewed simply as the velocity of that object as would be calculated non-relativistically by an inertial guidance system on board the object itself if it accelerated from rest in that frame to its given speed.

In more than one spatial dimension

From mathematical point of view, possible values of relativistic velocity form a manifold, where the metric tensor corresponds to the proper acceleration (see above). This is a non-flat space (namely, a hyperbolic space), and rapidity is just the distance from the given velocity to the zero velocity in given frame of reference. Although it is possible, as noted above, to add and subtract rapidities where corresponding relative velocities are parallel, in the general case the rapidity-addition formula is more complex because of negative curvature. For example, the result of "addition" of two perpendicular motions with rapidities φ1 and φ2 will be greater than \sqrt{\varphi_1^2 + \varphi_2^2} expected by Pythagorean theorem. Rapidity in two dimensions can be usefully visualized using the Poincaré disk.[2] Points at the edge of the disk correspond to infinite rapidity. Geodesics correspond to steady accelerations. The Thomas precession is equal to minus the angular deficit of a triangle, or to minus the area of the triangle.

In experimental particle physics

The energy E and scalar momentum | p | of a particle of non-zero (rest) mass m are given by

E = m c^2 \cosh \varphi
| \mathbf p | = m c \, \sinh \varphi

and so rapidity can be calculated from measured energy and momentum by

\varphi = \tanh^{-1} \frac{| \mathbf p | c}{E}= \frac{1}{2} \ln \frac{E + | \mathbf p | c}{E - | \mathbf p | c}

However, experimental particle physicists often use a modified definition of rapidity relative to a beam axis

y = \frac{1}{2} \ln \frac{E + p_z c}{E - p_z c}

where pz is the component of momentum along the beam axis.[3] This is the rapidity of the boost along the beam axis which takes an observer from the lab frame to a frame in which the particle moves only perpendicular to the beam. Related to this is the concept of pseudorapidity.

See also

Notes and references

  1. ^ Minkowski, H., Fundamental Equations for Electromagnetic Processes in Moving Bodies", 1908
  2. ^ John A. Rhodes & Mark D. Semon (2003) "Relativistic velocity space, Wigner roation, and Thomas precession", American Journal of Physics 72(7):943–61
  3. ^ Amsler, C. et al., "The Review of Particle Physics", Physics Letters B 667 (2008) 1, Section 38.5.2
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.