Real-time systems

In computer science, real-time computing (RTC), or reactive computing, is the study of hardware and software systems that are subject to a "real-time constraint"— e.g. operational deadlines from event to system response. Real-time programs must guarantee response within strict time constraints, often referred to as "deadlines".[1] Real-time responses are often understood to be in the order of milliseconds, and sometimes microseconds. Conversely, a system without real-time facilities, cannot guarantee a response within any timeframe (regardless of actual or expected response times).

The use of this word should not be confused with the two other legitimate uses of 'real-time'. In the domain of simulations, the term means that the simulation's clock runs as fast as a real clock. In the processing and enterprise systems domains, the term is used to mean 'without perceivable delay'.

Real-time software may use one or more of the following: synchronous programming languages, real-time operating systems, and real-time networks, each of which provide essential frameworks on which to build a real-time software application.

A real-time system may be one where its application can be considered (within context) to be mission critical. The anti-lock brakes on a car are a simple example of a real-time computing system — the real-time constraint in this system is the time in which the brakes must be released to prevent the wheel from locking. Real-time computations can be said to have failed if they are not completed before their deadline, where their deadline is relative to an event. A real-time deadline must be met, regardless of system load.

History

The term real-time derives from its use in early simulation, in which a real-world process is simulated at a rate that matched that of the real process (now called Real-time Simulation to avoid ambiguity). Analog computers, most often, were capable of simulating at a much faster pace than real-time, a situation that could be just as dangerous as a slow simulation if it were not also recognized and accounted for.

Once when the MOS Technology 6502 (used in the Commodore 64 and Apple II), and later when the Motorola 68000 (used in the Macintosh, Atari ST, and Commodore Amiga) were popular, anybody could use their home computer as a real-time system. The possibility to deactivate other interrupts allowed for hard-coded loops with defined timing, the low interrupt latency allowed the implementation of a real-time operating system, giving the user interface and the disk drives lower priority than the real time thread. Compared to these the Programmable Interrupt Controller of the Intel CPUs (8086..80586) generates a very large latency and the Windows operating system is neither a real-time operating system nor does it allow a program to take over the CPU completely and use its own scheduler, without using native machine language and thus surpassing all interrupting windows code. However, several coding libraries exist which offer real time capabilities in a high level language on a variety of operating systems, for example Java Real Time. The Motorola 68000 and subsequent family members (68010, 68020 etc.) also became popular with manufacturers of industrial control systems thanks to this facility. This application area is one in which real-time control offers genuine advantages in terms of process performance and safety.

Criteria for real-time computing

A system is said to be real-time if the total correctness of an operation depends not only upon its logical correctness, but also upon the time in which it is performed. Real-time systems, as well as their deadlines, are classified by the consequence of missing a deadline.

Hard
Missing a deadline is a total system failure.
Firm
Infrequent deadline misses are tolerable, but may degrade the system's quality of service. The usefulness of a result is zero after its deadline.
Soft
The usefulness of a result degrades after its deadline, thereby degrading the system's quality of service.

Thus, the goal of a hard real-time system is to ensure that all deadlines are met, but for soft real-time systems the goal becomes meeting a certain subset of deadlines in order to optimize some application specific criteria. The particular criteria optimized depends on the application, but some typical examples include maximizing the number of deadlines met, minimizing the lateness of tasks and maximizing the number of high priority tasks meeting their deadlines.

Hard real-time systems are used when it is imperative that an event be reacted to within a strict deadline. Such strong guarantees are required of systems for which not reacting in a certain interval of time would cause great loss in some manner, especially damaging the surroundings physically or threatening human lives (although the strict definition is simply that missing the deadline constitutes failure of the system). For example, a car engine control system is a hard real-time system because a delayed signal may cause engine failure or damage. Other examples of hard real-time embedded systems include medical systems such as heart pacemakers and industrial process controllers. Hard real-time systems are typically found interacting at a low level with physical hardware, in embedded systems. Early video game systems such as the Atari 2600 and Cinematronics vector graphics had hard real-time requirements because of the nature of the graphics and timing hardware.

In the context of multitasking systems the scheduling policy is normally priority driven (pre-emptive schedulers). Other scheduling algorithms include Earliest Deadline First, which, ignoring the overhead of context switching, is sufficient for system loads of less than 100%.[2] New overlay scheduling systems, such as an Adaptive Partition Scheduler assist in managing large systems with a mixture of hard real-time and non real-time applications.

Soft real-time systems are typically used where there is some issue of concurrent access and the need to keep a number of connected systems up to date with changing situations; for example software that maintains and updates the flight plans for commercial airliners. The flight plans must be kept reasonably current but can operate to a latency of seconds. Live audio-video systems are also usually soft real-time; violation of constraints results in degraded quality, but the system can continue to operate.

Real-time in Digital Signal Processing

In a real-time DSP process, the analyzed (input) and generated (output) samples can be processed (or generated) continuously in the time it takes to input and output the same set of samples independent of the processing delay.[3] It means that the processing delay must be bounded even if the processing continues for an unlimited time. That means that the mean processing time per sample is no greater than the sampling period, which is the reciprocal of the sampling rate. This is the criterion whether the samples are grouped together in large segments and processed as blocks or are processed individually and whether there are long, short, or non-existent input and output buffers.

Consider an audio DSP example; if a process requires 2.01 seconds to analyze, synthesize, or process 2.00 seconds of sound, it is not real-time. If it takes 1.99 seconds, it is or can be made into a real-time DSP process.

A common life analog is standing in a line or queue waiting for the checkout in a grocery store. If the line asymptotically grows longer and longer without bound, the checkout process is not real-time. If the length of the line is bounded, customers are being "processed" and output as rapidly, on average, as they are being inputted and that process is real-time. The grocer might go out of business or must at least lose business if he/she cannot make his/her checkout process real-time (so it's fundamentally important that this process be real-time).

A signal processing algorithm that cannot keep up with the flow of input data with output falling farther and farther behind the input is not real-time. But if the delay of the output (relative to the input) is bounded regarding a process that operates over an unlimited time, then that signal processing algorithm is real-time, even if the throughput delay may be very long.

Real-time and high-performance

Real-time computing is sometimes misunderstood to be high-performance computing, but this is not always the case. For example, a massive supercomputer executing a scientific simulation may offer impressive performance, yet it is not executing a real-time computation. Conversely, once the hardware and software for an anti-lock braking system has been designed to meet its required deadlines, no further performance gains are obligatory. Furthermore, if a network server is highly loaded with network traffic, its response time may be slower but will (in most cases) still succeed before it times out (hits its deadline). Hence, such a network server would not be considered a real-time system: temporal failures (delays, time-outs, etc.) are typically small and compartmentalized (limited in effect) but are not catastrophic failures. In a real-time system, such as the FTSE 100 Index, a slow-down beyond limits would often be considered catastrophic in its application context. Therefore, the most important requirement of a real-time system is predictability and not performance.

Some kinds of software, such as many chess-playing programs, can fall into either category. For instance, a chess program designed to play in a tournament with a clock will need to decide on a move before a certain deadline or lose the game, and is therefore a real-time computation, but a chess program that is allowed to run indefinitely before moving is not. In both of these cases, however, high performance is desirable: the more work a tournament chess program can do in the allotted time, the better its moves will be, and the faster an unconstrained chess program runs, the sooner it will be able to move. This example also illustrates the essential difference between real-time computations and other computations: if the tournament chess program does not make a decision about its next move in its allotted time it loses the game—i.e., it fails as a real-time computation—while in the other scenario, meeting the deadline is assumed not to be necessary. High-performance is indicative of the amount of processing that is performed in a given amount of time, while real-time is the ability to get done with the processing to yield a useful output in the available time.

Design methods

Several methods exist to aid the design of real-time systems, an example of which is MASCOT, an old but very successful method which represents the concurrent structure of the system. Other examples are HOOD, Real-Time UML, AADL the Ravenscar profile, android and Real-Time Java.

See also

References

External links

Technical committees

  • IEEE Technical Committee on Real-Time Systems
  • Euromicro Technical Committee on Real-time Systems

Scientific conferences

  • ECRTS - Euromicro Conference on Real-time Systems
  • IEEE Real-time Systems Symposium
  • IEEE Real-time Technology and Applications Symposium
  • International Symposium on Object-oriented Real-time distributed Computing
  • IEEE International Conference on Embedded and Real-Time Computing Systems and Applications
  • Real-Time & Embedded Computing Conference

Journals

  • International Journal of Critical Computer-Based Systems
  • International Journal of Real-Time Systems

Research groups

  • Cyber-Physical Systems Integration Lab, University of Illinois at Urbana-Champaign.
  • IDA Institute of Computer and Network Engineering, TU Braunschweig, Germany
  • CISTER Research Unit, ISEP, Polytechnic Institute of Porto (IPP), Portugal
  • Real-Time Systems Research Group,INRIA,LORIA NANCY, France
  • Real-Time & Embedded Computing Laboratory (USMAN SHARIF BCS-SP03-37)
  • Mälardalen Real-Time research Centre
  • Real-Time Computing Laboratory
  • Real-Time Systems Laboratory
  • RTSE Laboratory
  • Institute for Systems Engineering - Real Time systems Group
  • Real-Time Systems Laboratory at Scuola Superiore Sant'Anna, Pisa, Italy
  • Technical University of Kaiserslautern - Institute for Electrical Engineering and Information Technology - Real-Time Systems Group
  • Vienna University of Technology - Institute for Computer Engineering - Real-Time Systems Group
  • Real-Time Systems Research Group at the University of York, UK
  • Chalmers University of Technology - Dependable Real-Time Systems research group
  • ARTES: a national Swedish strategic research initiative in Real-Time Systems supported by the Swedish Foundation for Strategic Research (SSF), SE
  • Real-Time Systems at the University of North Carolina at Chapel Hill
  • Real-time Systems Laboratory at Virginia Polytechnic and State University, Blacksburg
  • Mc2labs RealTime Industries. Real-time ICT Research & Development. RealTime Internet programming infrastructures, Mogliano Veneto, Italy
  • Simula Research Laboratory, Media Performance Group

Technical Papers

  • The What, Where and Why of Real-Time Simulationid:Real-time

nl:Real-time ru:Системы реального времени

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.