World Library  
Flag as Inappropriate
Email this Article

Richardson number

Article Id: WHEBN0000393810
Reproduction Date:

Title: Richardson number  
Author: World Heritage Encyclopedia
Language: English
Subject: Froude number, Lewis Fry Richardson, Fluid dynamics, Dimensionless quantity, Kelvin–Helmholtz instability
Collection: Atmospheric Dispersion Modeling, Buoyancy, Dimensionless Numbers, Fluid Dynamics
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Richardson number

The Richardson number (Ri) is named after Lewis Fry Richardson (1881 – 1953). It is the dimensionless number that expresses the ratio of the buoyancy term to the flow gradient term:[1]

\mathrm{Ri} = \frac{\text{buoyancy term}}{\text{flow gradient term}} = \frac{g}{\rho} \frac{\nabla \rho}{(\nabla u)^2}

where g is the external body force, ρ is density, L a representative vertical lengthscale, and U a representative flow speed.

The Richardson number, or one of several variants, is of practical importance in weather forecasting and in investigating density and turbidity currents in oceans, lakes, and reservoirs.

When considering flows in which density differences are small (the Boussinesq approximation), it is common to use the reduced gravity g' and the relevant parameter is the densimetric Richardson number

\mathrm{Ri} = \frac{g'}{\rho} \frac{\nabla \rho}{(\nabla u)^2}

which is used frequently when considering atmospheric or oceanic flows.

If the Richardson number is much less than unity, buoyancy is unimportant in the flow. If it is much greater than unity, buoyancy is dominant (in the sense that there is insufficient kinetic energy to homogenize the fluids).

If the Richardson number is of order unity, then the flow is likely to be buoyancy-driven: the energy of the flow derives from the potential energy in the system originally.

Aviation

In aviation, the Richardson number is used as a rough measure of expected air turbulence. A lower value indicates a higher degree of turbulence. Values in the range 10 to 0.1 are typical, with values below unity indicating significant turbulence.

Thermal convection

District heating accumulation tower of the power plant Theiss, with volume of 50000 cubic meters

In thermal convection problems, Richardson number represents the importance of natural convection relative to the forced convection. The Richardson number in this context is defined as

\mathrm{Ri} = \frac{g \beta (T_\text{hot} - T_\text{ref})L}{V^2}

where g is the gravitational acceleration, \beta is the thermal expansion coefficient, Thot is the hot wall temperature, Tref is the reference temperature, L is the characteristic length, and V is the characteristic velocity.

The Richardson number can also be expressed by using a combination of the Grashof number and Reynolds number,

\mathrm{Ri} = \frac{\mathrm{Gr}}{\mathrm{Re}^2}.

Typically, the natural convection is negligible when Ri < 0.1, forced convection is negligible when Ri > 10, and neither is negligible when 0.1 < Ri < 10. It may be noted that usually the forced convection is large relative to natural convection except in the case of extremely low forced flow velocities. In the design of water filled thermal energy storage tanks, the Richardson number can be useful.[2]

Oceanography

In oceanography, the Richardson number has a more general form which takes stratification into account. It is a measure of relative importance of mechanical and density effects in the water column, as described by the Taylor–Goldstein equation, used to model Kelvin–Helmholtz instability which is driven by sheared flows.

\mathrm{Ri} = N^2/(\mathrm{d}u/\mathrm{d}z)^2

where N is the Brunt–Väisälä frequency.

The Richardson number defined above is always considered positive. A negative value of (i.e. complex N) indicates unstable density gradients with active convective overturning. Under such circumstances the magnitude of negative Ri is not generally of interest. It can be shown that Ri < 1/4 is a necessary condition for velocity shear to overcome the tendency of a stratified fluid to remain stratified, and some mixing (turbulence) will generally occur. When Ri is large, turbulent mixing across the stratification is generally suppressed.[3]

Notes

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.