World Library  
Flag as Inappropriate
Email this Article

Standard temperature and pressure

Article Id: WHEBN0001055200
Reproduction Date:

Title: Standard temperature and pressure  
Author: World Heritage Encyclopedia
Language: English
Subject: Chemical element, Density, Refractive index, Atmospheric pressure, STP, Speed of sound, Power-to-weight ratio, Human scale, Bottled gas, 1,3-Butadiene (data page)
Collection:
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Standard temperature and pressure

Not to be confused with Standard state.

Standard conditions for temperature and pressure are standard sets of conditions for experimental measurements established to allow comparisons to be made between different sets of data. The most used standards are those of the International Union of Pure and Applied Chemistry (IUPAC) and the National Institute of Standards and Technology (NIST), although these are not universally accepted standards. Other organizations have established a variety of alternative definitions for their standard reference conditions.

In chemistry, IUPAC established standard temperature and pressure (informally abbreviated as STP) as a temperature of 273.15 K (0 °C, 32 °F) and an absolute pressure of 100 kPa (14.504 psi, 0.987 atm, 1 bar).[1] An unofficial, but commonly used standard is standard ambient temperature and pressure (SATP) as a temperature of 298.15 K (25 °C, 77 °F) and an absolute pressure of 100 kPa (14.504 psi, 0.987 atm). The STP and the SATP should not be confused with the standard state commonly used in thermodynamic evaluations of the Gibbs energy of a reaction.

NIST uses a temperature of 20 °C (293.15 K, 68 °F) and an absolute pressure of 101.325 kPa (14.696 psi, 1 atm). The International Standard Metric Conditions for natural gas and similar fluids are 288.15 K (59.00 °F; 15.00 °C) and 101.325 kPa.[2]

In industry and commerce, standard conditions for temperature and pressure are often necessary to define the standard reference conditions to express the volumes of gases and liquids and related quantities such as the rate of volumetric flow (the volumes of gases vary significantly with temperature and pressure). However, many technical publications (books, journals, advertisements for equipment and machinery) simply state "standard conditions" without specifying them, often leading to confusion and errors. Good practice is to always incorporate the reference conditions of temperature and pressure.

Definitions

Past use

In the last five to six decades, professionals and scientists using the metric system of units defined the standard reference conditions of temperature and pressure for expressing gas volumes as being 15 °C (288.15 K; 59.00 °F) and 101.325 kPa (1 atm or 760 Torr). During those same years, the most commonly used standard reference conditions for people using the imperial or U.S. customary systems was 60 °F (15.56 °C; 288.71 K) and 14.696 psi (1 atm) because it was almost universally used by the oil and gas industries worldwide. The above definitions are no longer the most commonly used in either system of units.

Current use

Many different definitions of standard reference conditions are currently being used by organizations all over the world. The table below lists a few of them, but there are more. Some of these organizations used other standards in the past. For example, IUPAC has, since 1982, defined standard reference conditions as being 0 °C and 100 kPa (1 bar), in contrast to its old standard of 0 °C and 101.325 kPa (1 atm).[3]

Natural gas companies in Europe and South America have adopted 15 °C (59 °F) and 101.325 kPa (14.696 psi) as their standard gas volume reference conditions.[4][5][6] Also, the International Organization for Standardization (ISO), the United States Environmental Protection Agency (EPA) and National Institute of Standards and Technology (NIST) each have more than one definition of standard reference conditions in their various standards and regulations.

In Russia, State Standard GOST 2939-63 sets the following standard conditions: 20 °C (293.15 K), 760 mmHg (101325 N/m2) and zero humidity.

Standard reference conditions in current use
Temperature Absolute pressure Relative humidity Publishing or establishing entity
°C kPa % RH
0 100.000   IUPAC (STP)[1]
0 101.325   NIST,[7] ISO 10780,[8] formerly IUPAC[1]
15 101.325 0[9][2] ICAO's ISA,[9] ISO 13443,[2] EEA,[10] EGIA[11]
20 101.325   EPA,[12] NIST[13]
25 101.325   EPA[14]
25 100.000   SATP[15]
20 100.000 0 CAGI[16]
15 100.000   SPE[17]
20 101.3 50 ISO 5011[18]
°F psi  % RH
60 14.696   SPE,[17] U.S. OSHA,[19] SCAQMD[20]
60 14.73   EGIA,[11] OPEC,[21] U.S. EIA[22]
59 14.503 78 U.S. Army Standard Metro[23]Template:Efn
59 14.696 60 ISO 2314,[24] ISO 3977-2[25]
°F in Hg  % RH
70 29.92 0 AMCA,[26]Template:Efn air density = 0.075 lbm/ft³. This AMCA standard applies only to air.
59 29.92   Federal Aviation Administration (FAA)[27]

Notes:

  • EGIA: Electricity and Gas Inspection Act (of Canada)
  • SATP: Standard Ambient Temperature and Pressure

International Standard Atmosphere

In aeronautics and fluid dynamics the "International Standard Atmosphere" (ISA) is a specification of pressure, temperature, density, and speed of sound at each altitude. The International Standard Atmosphere is representative of atmospheric conditions at mid latitudes. In the USA this information is specified the U.S. Standard Atmosphere which is identical to the "International Standard Atmosphere" at all altitudes up to 65,000 feet above sea level.

Standard laboratory conditions

Due to the fact that many definitions of standard temperature and pressure differ in temperature significantly from standard laboratory temperatures (e.g., 0 °C vs. ~25 °C), reference is often made to "standard laboratory conditions" (a term deliberately chosen to be different from the term "standard conditions for temperature and pressure", despite its semantic near identity when interpreted literally). However, what is a "standard" laboratory temperature and pressure is inevitably culture-bound, given that different parts of the world differ in climate, altitude and the degree of use of heat/cooling in the workplace. For example, schools in New South Wales, Australia use 25 °C at 100 kPa for standard laboratory conditions.[28]

ASTM International has published Standard ASTM E41- Terminology Relating to Conditioning and hundreds of special conditions for particular materials and test methods. Other standards organizations also have specialized standard test conditions.

Molar volume of a gas

It is equally as important to indicate the applicable reference conditions of temperature and pressure when stating the molar volume of a gas[29] as it is when expressing a gas volume or volumetric flow rate. Stating the molar volume of a gas without indicating the reference conditions of temperature and pressure has no meaning and it can cause confusion.

The molar gas volumes can be calculated with an accuracy that is usually sufficient by using the universal gas law for ideal gases. The usual expression is:

P V = nRT

...which can be rearranged thus:

\frac{V}{n} = \frac{RT}{P}

where (in SI metric units):

P = the absolute pressure of the gas, in Pa (pascal)
n = amount of substance, in mol
V = the volume of the gas, in m3
T = the absolute temperature of the gas, in K
R = the universal gas law constant of 8.3145 m3·Pa/(mol·K)

The molar volume of any ideal gas may be calculated at various standard reference conditions as shown below:

  • V/n = 8.3145 × 273.15 / 101.325 = 22.414 m3/kmol at 0 °C and 101.325 kPa
  • V/n = 8.3145 × 273.15 / 100.000 = 22.711 m3/kmol at 0 °C and 100 kPa
  • V/n = 8.3145 × 298.15 / 101.325 = 24.466 m3/kmol at 25 °C and 101.325 kPa
  • V/n = 8.3145 × 298.15 / 100.000 = 24.790 m3/kmol at 25 °C and 100 kPa
  • V/n = 10.7316 × 519.67 / 14.696 = 379.48 ft3/lbmol at 60 °F and 14.696 psi (or about 0.8366 ft3/gram mole)
  • V/n = 10.7316 × 519.67 / 14.730 = 378.61 ft3/lbmol at 60 °F and 14.73 psi

The technical literature can be confusing because many authors fail to explain whether they are using the universal gas law constant R, which applies to any ideal gas, or whether they are using the gas law constant Rs, which only applies to a specific individual gas. The relationship between the two constants is Rs = R / M, where M is the molecular weight of the gas.

The US Standard Atmosphere (USSA) uses 8.31432 m3·Pa/(mol·K) as the value of R (see Gas constant) for all calculations. However, the USSA,1976 does recognize that this value is not consistent with the values of the Avogadro constant and the Boltzmann constant.[30]

See also

Notes

Template:Notelist

References

External links

  • IUPAC Gold Book.
  • IUPAC Gold Book.
  • IUPAC Gold Book.
  • IUPAC Gold Book.
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.