World Library  
Flag as Inappropriate
Email this Article

Train stop

Article Id: WHEBN0001204412
Reproduction Date:

Title: Train stop  
Author: World Heritage Encyclopedia
Language: English
Subject: Intermittent inductive automatic train stop (US), Toronto rapid transit signals, Train Protection & Warning System, GWR 5700 Class, Block post
Collection: Train Protection Systems
Publisher: World Heritage Encyclopedia

Train stop

A signal with associated trip arm in the raised position (circled)

Part of a railway signalling system, a train stop, trip stop or tripcock (sometimes called a tripper) is a train protection device that automatically stops a train if it attempts to pass a signal when the signal aspect and operating rules prohibit such movement, or (in some applications) if it attempts to pass at an excessive speed.


  • Basic operation 1
  • Types of train stops 2
    • Trip stops 2.1
    • Timed train stops 2.2
    • Fixed train stops 2.3
  • Installations 3
    • Trackside installation 3.1
  • Reverse direction 4
  • Proving 5
  • Depiction 6
  • See also 7
  • References 8
  • Further reading 9

Basic operation

Train-mounted trip cock, located on the leading bogie of a Siemens EMU

The train stop system comprises two basic components. One is the trip arm mechanism, mounted on the ground adjacent to the rail, which essentially consists of a spring-loaded arm connected to an electric motor (or pneumatic cylinder in electro-pneumatic systems). The other is the train-mounted trip cock, which is connected either directly or electrically to the train's braking system.

The trip arm is raised automatically whenever a train should be brought to a halt. When the signalling system determines it is safe for the train to proceed, the motor drives the trip arm down to the lowered position. The spring ensures that the trip arm is raised in all other situations, which is an essential fail-safe provision in case of driver blackouts. If a train attempts to pass the signal with the trip arm in the raised position, the trip arm makes mechanical contact with the trip cock on the train, causing the train's brakes to be automatically applied, thereby bringing the train to a halt.

Wayside trip arms are adjusted so that they rise to a point approximately 2½ inches (about 6 centimetres) above the top of the running rail when in the stop position, and lower to approximately 1 inch (2.5 centimetres) below the top of the running rail when clear. The time taken for the arm to rise or be lowered is approximately two seconds.

Types of train stops

There are three types of train stops:

  • Trip stop - stops train trying to pass red signal
  • Timed train stop - stops train moving too fast
  • Fixed train stop - prevents any trains from passing a point

Trip stops

The trip arm is raised whenever the signal is not displaying a proceed aspect. If a train tries to pass the signal, the trip cock on the train strikes the raised trip arm and the train is brought to a halt. When the signal indicates it is safe to proceed (clear or caution), the trip arm is lowered, and a train is able to proceed without further hindrance. In some cases, the trip arm will not be lowered when the signal to which it applies is exhibiting a proceed indication, e.g. when subsidiary signals are cleared, forcing a train to trip before proceeding, thus ensuring that movements are conducted at safe speeds.

Timed train stops

With a timed train stop, the trip arm stays raised until the approaching train has shunted a track circuit on the approach for a period of time corresponding to a set speed. If the train approaches at a speed higher than the one that is set, the trip arm remains raised and trips the train to a stop. If the train approaches at a speed equal to or lower than the set speed, the trip arm lowers before the train arrives, and the train is able to proceed without further hindrance.

Some timed train stops require the driver to acknowledge a stimulus before the trip arm is lowered on a yellow signal.

For sections of track with lower speed limits (15–20 km/h) a simpler construction is also used. The trip arm rotates freely on a horizontal axis with a counterbalance attached to its lower end. If a train's speed is low, the arm will be rotated by the trip cock with a force insufficient to initiate braking. But if its speed is too high, force will be large due to the counterbalance inertia, causing the brakes to be applied.

Fixed train stops

With fixed train stops, the trip arm cannot be lowered. Fixed stops are positioned close to the end of a dead-end track, to stop a train before it runs out of track. They may also be used at the end of track sections beyond which certain trains should not pass, such as the end of electrified territory (e.g. Hamilton, NSW), or to test the automatic brake and tripgear of trains departing certain locations, e.g. storage sidings.

A fixed train stop that is the last one on a running line in the reverse direction may, despite its name, be suppressed, as is the case with the associated "Fixed Signals" on the Sydney network. Suppression is needed because in Sydney, the rear trip cock on a train is always lowered, while in Melbourne, by contrast, suppression is not required because the trip cock at the rear of a train is always raised clear of any wayside trip arm.


In 1901, Union Switch and Signal Company developed the first automatic train stop system for the Boston Elevated Railway. This system was soon adopted by the New York City Subway and other transit systems in the United States.[1] Similar systems were installed around this time on the London Underground system.

Because of its mechanical nature, the train stop has certain limitations in application. Severe snow and ice conditions, for example, could interfere with operation of the wayside trip arm. Its widest application, therefore, is on underground rapid transit lines, where conditions that might interfere with proper operation are readily controlled. The Toronto Transit Commission Subway is another system where train stops are used.

Train stops on London Underground lines are gradually being phased out in favour of ATP and distance-to-go signalling. Train stops remain standard equipment on all RailCorp metropolitan passenger lines in New South Wales, and on the electrified suburban railway system in Melbourne, Australia.

Trackside installation

Train stop of Berlin S-Bahn
  • Berlin S-Bahn rapid transit uses a metal bar as the trip arm, positioned at the height of the first bogie, on which the trip cock is placed. The metal bar (also named "Streckenanschlag" / track stop collar) folds away to allow passing.
  • Berlin U-Bahn small profile underground uses a metal stick as a trip arm, which hangs over the track horizontally like a semaphore signal. The trip cock is on the roof of the first wagon (near the first door) almost looking like a lightning rod.
  • Berlin U-Bahn large profile underground uses a mushroom-shaped swivel next to the right rail as a trip arm. The trip cock is mounted on the first bogie.
  • London Underground uses a square-shaped metal plate that functions similarly to that on the New York City Subway system.
  • Several lines on the Moscow Metro use a semi-circle that rotates into position when signals are red. All of them are on the right side of tracks as trains' trip cocks are fitted on the right side.
  • New York City Subway uses a T-shaped metal bar rising from the floor as a trip arm; on the right side of the track for the A Division (numbered trains) and left side for the B Division (lettered trains). To allow trains to proceed it pivots down. A trip cock is mounted on the corner of the truck (bogie) of each car. The placement of the trip cock depends on the division the train runs on; some rolling stock is equipped with a trip cock on both sides. The train stop can be identified on the tracks because they are painted yellow for evidence if it has ever tripped a train.
  • Sydney now uses the London Underground type J trip arm called the JA, except that it is mirror-image mounted on the left hand side of the track instead of the right hand side. A nearly identical system is used in Wellington.
  • Toronto Subway also uses a T-shaped metal bar that rises from the floor except it is always on the right side of the track for all rolling stock because the trip cock is placed on the right side for all rolling stock.

Reverse direction

When trains operate in the reverse direction, they may "back trip" on train stops applying to the normal direction, which is a nuisance. This may be avoided in one of three ways:

  1. In Melbourne the rear trip cock is raised, although this runs the risk of runaways from terminal stations at high elevations.[2]
  2. In Sydney, the rear trip is always lowered, and trip arms in the opposite direction are "suppressed" so that they do not engage the rear trip cock. Trip cocks on intermediate cars, if any, are always raised.
  3. In New York, when the signalling system clears motion in one direction (on bi-directional track or through an interlocking), it will automatically drive the trip arms which apply to the other direction. This is necessary because trip cocks are located along the entire length of trains in New York, not just the lead car.


The mechanical trip arm is proved depressed in the green light of its associated signal. The trip arm is proved at normal (red) in the track circuit following that signal. The proving switch detects the actual arm of the train stop, and breakage of that arm centres the switch neither depressed nor normal.


The car chase scene in the motion picture The French Connection shows a train stop being struck by a New York City elevated subway train as it approaches the train ahead of it on the same track. Although the moving train hits the train stop and begins to slow down, for the purposes of the film sequence, it was supposedly traveling too fast to reach a full stop before colliding with the train ahead.

See also


  1. ^ Union Switch and Signal Co. (1911). Automatic Block Signalling for Interurban Electric Railways. Swissvale, PA. p. 33.  Bulletin No. 57.
  2. ^ "Runaway of Suburban Electric Passenger Train 5264 and collision with Diesel Locomotive Hauled Passenger Train 8141". Rail safety investigations & reports. Australian Transport Safety Bureau. 2003-07-25. Retrieved 2012-08-26. 

Further reading

  • Richey, Albert S. (1915). "Automatic Train Stop". Electric Railway Handbook. New York: McGraw-Hill. pp. 813–815. 
  • General Railway Signal Co. (June 1979). Elements of Railway Signaling
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.