World Library  
Flag as Inappropriate
Email this Article

USB adapter

Article Id: WHEBN0037315373
Reproduction Date:

Title: USB adapter  
Author: World Heritage Encyclopedia
Language: English
Subject: USB
Collection:
Publisher: World Heritage Encyclopedia
Publication
Date:
 

USB adapter

A USB adapter is a type of protocol converter which is used for converting USB data signals to and from other communications standards. Commonly, USB adaptors are used to convert USB data to standard serial port data and vice versa.

Most commonly the USB data signals are converted to either RS232, RS485, RS422 or TTL serial data. The older serial RS423 protocol is rarely used any more, so USB to RS423 adapters are less common.

Uses

USB to serial RS232 adapters are often used with consumer, commercial and industrial applications and USB to serial RS485/RS422 adapters are usually mainly used only with industrial applications.

Adapters for converting USB to other standard or proprietary protocols also exist; however, these are usually not referred to as a serial adapter.

The primary application scenario is to enable USB based computers to access and communicate with serial devices featuring D-Sub (usually DB9 or DB25) connectors or screw terminals, where security of the data transmission is not generally an issue.

USB serial adapters can be isolated or non-isolated. The isolated version has opto-couplers and/or surge suppressors to prevent static electricity or other high-voltage surges to enter the data lines thereby preventing data loss and damage to the adapter and connected serial device. The non-isolated version has no protection against static electricity or voltage surges, which is why this version is usually recommended for only non-critical applications and at short communication ranges.

History

Historically most personal computers had a built-in D-sub serial RS232 port, also referred to as a COM port, which could be used for connecting the computer to most types of serial RS232 devices. By the late 90’s many computer manufacturers started to phase out the serial COM port in favor of the USB port. By the mid 2000s some computers had both a serial COM port and a USB port, however many did no longer have a serial COM port by that time; and today almost all modern computers have no serial COM port but only USB ports instead. Since many serial devices with a RS232, RS485 or RS422 port are still in use and even still produced today, the disappearing of the serial COM port from personal computers has created a need for the USB to serial adapter.

Architecture

Die of a PL2303HX USB to Serial (RS-232) Bridge Controller manufactured by Prolific Technology.

As a simplified example a typical standard USB to serial adapter consists of a USB processor chip which processes the USB signals. The USB processor sends the processed USB signals to a serial driver chip which applies the correct voltages and sends the processed data signals to the serial output.[1] For the computer to be able to detect and process the data signals drivers must be installed on the computer. When the USB to serial adapter is connected to the computer via the USB port the drivers on the computer creates a virtual COM port which shows up in Device Manager. This virtual COM port can be accessed and used as if it was a built-in serial COM port. However, the characteristics of the virtual COM port are not exactly the same as a real internal COM port, mainly due to data latency; which means that if very sensitive and precise data transfer is required, the USB to serial adapter might be unreliable and not a desired solution.[2] Virtual COM drivers are usually available for Windows, Linux and MAC only.[3]

References

  1. ^ "5 Steps for Selecting the Right USB to Serial adapter". Retrieved 14 October 2012. 
  2. ^ "RS232 to USB converters". Retrieved 14 October 2012. 
  3. ^ "FTDI Drivers". Retrieved 14 October 2012. 
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.