World Library  
Flag as Inappropriate
Email this Article

XFP transceiver

Article Id: WHEBN0030862422
Reproduction Date:

Title: XFP transceiver  
Author: World Heritage Encyclopedia
Language: English
Subject: 10 Gigabit Ethernet, Ethernet, Multi-source agreement, Management Data Input/Output, C Form-factor Pluggable
Collection: Fiber-Optic Communications, Hot-Swappable Transceiver
Publisher: World Heritage Encyclopedia

XFP transceiver

Intel XFP Transceiver (MultiMode Fiber Optics)

The XFP (10 Gigabit Small Form Factor Pluggable) is a standard for transceivers for high-speed computer network and telecommunication links that use optical fiber. It was defined by an industry group in 2002, along with its interface to other electrical components, which is called XFI.


  • Description 1
  • XFI 2
  • Mechanical dimensions 3
  • Types 4
  • See also 5
  • References 6


XFP modules are hot-swappable and protocol-independent. They typically operate at near-infrared wavelengths (colors) of 850 nm, 1310 nm or 1550 nm. Principal applications include 10 Gigabit Ethernet, 10 Gbit/s Fibre Channel, synchronous optical networking (SONET) at OC-192 rates, synchronous optical networking STM-64, 10 Gbit/s Optical Transport Network (OTN) OTU-2, and parallel optics links. They can operate over a single wavelength or use dense wavelength-division multiplexing techniques. They include digital diagnostics that provide management that were added to the SFF-8472 standard.[1] XFP modules use an LC fiber connector type to achieve high density.

The XFP specification was developed by the XFP Multi Source Agreement Group. It is an informal agreement of an industry group, not officially endorsed by any standards body. The first preliminary specification was published on March 27, 2002. The first public release was on July 19, 2002. It was adopted on March 3, 2003, and updated with minor updates through August 31, 2005.[2] The chair of the XFP group was Robert Snively of

  1. ^ "SFF-8472 Specification for Diagnostic Monitoring Interface for Optical Transceivers Rev 11.0". Small Form Factor Committee. September 14, 2010. Retrieved June 16, 2011. 
  2. ^ a b c "INF-8077i: 10 Gigabit Small Form Factor Pluggable Module". Small Form Factor Committee. August 31, 2005. Retrieved June 16, 2011. 
  3. ^ "About the 10 Gigabit Small Form Factor Pluggable (XFP) Multi Source Agreement (MSA) Group". 2009. Archived from the original on May 1, 2009. Retrieved June 16, 2011. 
  4. ^ INF-8074i Specification for SFP (Small Formfactor Pluggable) Transceiver (pdf), SFF Committee, May 12, 2001, p. 6 
  5. ^ XFP Transceiver, Optcore 
  6. ^ "INF-8474i Specification for Xenpak 10 Gigabit Ethernet Transceiver Rev 3.0". Small Form Factor Committee. September 18, 2002. Retrieved June 16, 2011. 
  7. ^ John Walko (November 19, 2002). "Intel pushes optical comps for all transceiver MSAs". EE Times. Retrieved June 16, 2011. 


See also

The XFP packaging was smaller than the XENPAK form-factor which had been published earlier (by almost a year).[6] Some vendors supported both, or the XENPAK follow-ons called XPAK and X2.[7]

  • SR - 850 nm, for a maximum of 300 m
  • LR - 1310 nm, for distances up to 10 km
  • ER - 1550 nm, for distances up to 40 km
  • ZR - 1550 nm, for distances up to 80 km

XFP are available with a variety of transmitter and receiver types, allowing users to select the appropriate transceiver for each link to provide the required optical reach over the available optical fiber type (e.g. multi-mode fiber or single-mode fiber). XFP modules are commonly available in several different categories:[5]


SFP[4] XFP[2]
Height 8.5 mm (0.33 inches) 8.5 mm (0.33 inches)
Width 13.4 mm (0.53 inches) 18.35 mm (0.72 inches)
Depth 56.5 mm (2.22 inches) 78.0 mm (3.10 inches)
for more cooling. heat sinks (SFP). One of the reasons for the increase in size is to allow for on-board small form-factor pluggable transceiverThe physical dimensions of the XFP transceiver are slightly larger than the original

Mechanical dimensions

The XFI electrical interface specification was a 10 gigabit per second chip-to-chip electrical interface specification defined as part of the XFP multi-source agreement. It was also developed by the XFP MSA group. XFI provides a single lane running at 10.3125 Gbit/s when using a 64B/66B encoding scheme. A serializer/deserializer is often used to convert from a wider interface such as XAUI that has four lanes running at 3.125 Gbit/s using 8B/10B encoding. XFI is sometimes pronounced as "X" "F" "I" and other times as "ziffie".



This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.