World Library  
Flag as Inappropriate
Email this Article

10 Nanometer

Article Id: WHEBN0016567591
Reproduction Date:

Title: 10 Nanometer  
Author: World Heritage Encyclopedia
Language: English
Subject: Skylake (microarchitecture), 14 nanometer, Yorkfield, Wolfdale (microprocessor), Silvermont
Publisher: World Heritage Encyclopedia

10 Nanometer

In semiconductor fabrication, the International Technology Roadmap for Semiconductors (ITRS) defines the 10 nanometer (10 nm) node as the technology node following the 14 nm node. "10 nm class" denotes chips made using process technologies between 10 and 20 nanometers.

As of 2015 10nm devices are still under commercial development.



The ITRS' original naming of this technology node was "11 nm". According to the 2007 edition of the roadmap, by the year 2022, the half-pitch (i.e., half the distance between identical features in an array) for a DRAM should be 11 nm. Pat Gelsinger, at the time serving as Intel's Chief Technology Officer, claimed in 2008 that Intel saw a 'clear way' towards the 10 nm node.[1][2] At the 11 nm node, Intel expected (in 2006) to be using a half-pitch of around 21 nm, in 2015,[3] Nvidia's chief scientist, William Dally, claimed that they would also reach 11 nm semiconductors in 2015, a transition he claimed would be facilitated principally through new electronic design automation tools.[4]

This 10nm design rule is considered likely to be realized by multiple patterning,[5][6][7] given the difficulty of implementing EUV lithography by 2015.[8]

Potential technologies

While the roadmap has been based on the continuing extension of CMOS technology, even this roadmap does not guarantee that silicon-based CMOS will extend that far. This is to be expected, since the gate length for this node may be smaller than 6 nm, and the corresponding gate dielectric thickness would scale down to a monolayer or even less. Scientists have estimated that transistors at these dimensions are significantly affected by quantum tunnelling.[9] As a result, non-silicon extensions of CMOS, using III-V materials or Carbon nanotube/nanowires, as well as non-CMOS platforms, including molecular electronics, spin-based computing, and single-electron devices, have been proposed. Hence, this node marks the practical beginning of nanoelectronics.

The extensive use of ultra-low-k dielectrics (such as spin-on polymers or other porous materials) means that conventional photolithography, etch, or even chemical-mechanical polishing processes are unlikely to be used, because these materials contain a high density of voids and gaps. At the ~10 nm scale, quantum tunneling (especially through gaps) becomes a significant phenomenon.[10] Controlling gaps on these scales by means of electromigration can produce interesting electrical properties.[11]

Quantum tunneling may not be a disadvantage if its effect on device behavior can be understood, and exploited, in the design. Future transistors may have insulating channels. An electron wave function decays exponentially in a "classically forbidden" region at a rate that can be controlled by the gate voltage. Interference effects are also possible;[12] Alternate option is in heavier mass semiconducting channels.[13] Photoemission electron microscopy (PEEM) data has been used to show that low energy electrons ~1.35 eV could travel as far as ~15 nm in SiO2, despite an average measured attenuation length of 1.18 nm.[14]

Technology demos

On November 15, 2012, Samsung Electronics unveiled a 64 gigabyte (GB) embedded multimedia card (eMMC) based on 10 nm class process technology.[15]

In April 2015, TSMC announced that 10 nm production would begin at the end of 2016.[16]

On May 23rd 2015, Samsung Electronics showed off a wafer of 10nm FinFET chips.[17]

Mass production

On April 11, 2013, Samsung announced that it was mass-producing High-Performance 128-gigabit 3-bit Multi-level-cell NAND Flash Memory with a technology somewhere between 10 nm and 20 nm.[18]


  1. ^
  2. ^
  3. ^
  4. ^
  5. ^ SEMICON West - Lithography Challenges and Solutions
  6. ^ J. Word et al., Proc. SPIE 6925 (2008).
  7. ^ Intel extending ArF lithography
  8. ^ CNSE Technology Development Consortium for EUVL
  9. ^
  10. ^
  11. ^
  12. ^
  13. ^
  14. ^
  15. ^
  16. ^
  17. ^
  18. ^
Preceded by
14 nm
CMOS manufacturing processes Succeeded by
7 nm
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.