World Library  
Flag as Inappropriate
Email this Article

Uk postcodes

Article Id: WHEBN0004278959
Reproduction Date:

Title: Uk postcodes  
Author: World Heritage Encyclopedia
Language: English
Subject: Timeline of postal history
Publisher: World Heritage Encyclopedia

Uk postcodes

Postal codes used in the United Kingdom are known as postcodes (originally postal codes).[1] They are alphanumeric and were introduced by the GPO (Royal Mail) over a 15-year period from 11 October 1959 to 1974.[2] A full postcode is known as a "postcode unit" and usually corresponds to a limited number of addresses or a single large delivery point.[1]

Postcodes have been adopted for a wide range of purposes in addition to aiding the automated sorting of the mail: for calculating insurance premiums, designating destinations in route planning software, and as the lowest level of aggregation in census enumeration. Postcode data is stored, maintained and periodically updated in the Postcode Address File database, with the full address data for around 29 million delivery points.[1]

An earlier system of postal districts was implemented in London and other large cities from 1857. In London this system was refined in 1917 to include numbered subdivisions, extending to the other cities in 1934. These earlier districts were later incorporated into the national postcode system.


Earlier postal districts


The London post town covers 40% of Greater London. In 1857/8 it was divided into ten postal districts: EC (East Central), WC (West Central), N, NE, E, SE, S, SW, W, and NW. The S and NE sectors were later abolished and in 1917, as a wartime measure to improve efficiency, the districts were subdivided with a number applied to each sub-district, with the area served directly by the district head office as "1", then allocating the other numbers alphabetically by delivery office, e.g. N2 East Finchley, N3 Finchley, N4 Finsbury Park.

Some older road signs in Hackney still indicate the North East (NE) postal district today.

Other large towns

Following the successful introduction of postal districts in London, the system was gradually extended to other large towns. Liverpool was divided into Eastern, Northern, Southern and Western districts in 1864/65, and Manchester and Salford into eight numbered districts in 1867/68.[3]

In 1917 Dublin was divided into numbered postal districts. These continue in use in a modified form by An Post, the postal service of the Republic of Ireland. In 1923 Glasgow was divided in a similar way to London, with numbered districts preceded by a letter denoting the compass point (C, W, NW, N, E, S, SW, SE).[3]

In January 1932 the Postmaster General approved the division of a number of large towns into numbered districts.[3] In November 1934 the Post Office announced the introduction of the districts in "every provincial town in the United Kingdom large enough to justify it". Pamphlets were issued to each householder and business in ten areas notifying them of the number of the district in which their premises lay. The pamphlets included a map of the districts, and copies were made available at local head post offices. The public were "particularly invited" to include the district number in the address at the head of letters.[4] A publicity campaign in the following year encouraged the use of the district numbers. The slogan for the campaign was "For speed and certainty always use a postal district number on your letters and notepaper". A poster was fixed to every pillar box in the affected areas bearing the number of the district and appealing for the public's co-operation. Every post office in the numbered district was also to display this information. Printers of Christmas cards and stationery were requested to always include district numbers in addresses, and election agents for candidates in the upcoming general election were asked to ensure they correctly addressed the 100 million items of mail they were expected to post. In addition, businesses were issued with a free booklet containing maps and listings of the correct district number for every street in the ten areas.[5]

The ten areas were:[5]

For example, Toxteth was Liverpool 8. A single numbering sequence was shared by Manchester and Salford. Letters would be addressed to Manchester 1 or Salford 7. Some Birmingham codes were sub-divided with a letter, such as Great Barr, Birmingham 22 or Birmingham 22a,[6] as can still be seen on many older street-name signs.

The modern postcode system

The Post Office experimented with electromechanical sorting machines in the late 1950s.[7] These devices presented an envelope to an operator, who would press a button indicating which bin to sort the letter into. Postcodes were suggested to increase the efficiency of this process, by removing the need for the sorter to remember the correct sorting for as many places.[8] In January 1959 the Post Office analysed the results of a survey on public attitudes towards the use of postal codes, choosing a town in which to experiment with codes. The envisaged format was a six-character alphanumeric code with three letters designating the geographical area and three numbers to identify the individual address.[9] On 28 July Ernest Marples, the Postmaster General, announced that Norwich had been selected, and that each of the 150,000 private and business addresses would receive a code by October. Norwich had been selected as it already had eight automatic mail sorting machines in use.[10] The original Norwich format consisted of "NOR" followed by a space, then a two-digit number (which, unlike the current format, could include a leading zero) and a single final letter (instead of the two final letters in the current format).[11]

In October 1965 it was confirmed that postal coding was to be extended to the rest of the country in the "next few years".[12] On 1 May 1967 postcodes were introduced in Croydon. The codes for central Croydon started with the three letters CRO, and those of the surrounding post towns with outward codes (the characters before the space) of CR2, CR3 and CR4 - the last three characters, after the space, are known as the inward code. This was to be the beginning of a ten-year plan, costing an estimated £24 million. Within two years it was expected that coding would be used in Aberdeen, Belfast, Brighton, Bristol, Bromley, Cardiff, Coventry, Manchester, Newcastle upon Tyne, Newport, Reading, Sheffield, Southampton and the Western district of London.[13] By 1967 codes had been introduced to Aberdeen, Southampton, Brighton and Derby.[14] In 1970 codes were introduced to the London Western and North Western postal districts.[15] In December 1970 Christmas mail was postmarked with the message "Remember to use the Postal Code", although codes were used to sort mail in only a handful of sorting offices.[16]

During 1971 occupants of addresses began to receive notification of their postcode. Asked in the House of Commons about the completion of the coding exercise, the Minister of State for Posts and Telecommunications (whose role superseded that of Postmaster General in 1969), Sir John Eden, stated that it was expected to be completed during 1972.[17] The scheme was finalised in 1974 when Norwich was completely re-coded but the scheme tested in Croydon was sufficiently close to the final design for it to be retained, with CRO standardised as CR0 (district zero).[3] The central Newport area was originally allocated NPT, in a similar way to Norwich and Croydon, with the surrounding areas allocated NP1–NP8. This lasted until the end of 1984 when, NPT being non-standard and too similar to NP7, it was recoded NP9.[18] Girobank's GIR 0AA, the last domestic postcode with an alphabetical outward code, no longer exists in the Royal Mail's PAF system,[19] but remains in active use by the bank's owners, currently Santander UK.[20]

Adaptation of earlier systems into national system

When the national postcode system was introduced, many existing postal districts were incorporated into it, so that postcodes in Toxteth (Liverpool 8) start with L8. The districts in both Manchester and Salford gained "M" postcodes, so "Salford 7" became M7, etc. In other cases, the district numbers were replaced with new unrelated numbers. The old coding lives on in a small number of street signs with "Salford 7" etc., at the bottom. In Glasgow C1 became G1, W1 became G11, N1 became G21, E1 became G31, S1 became G41, SW1 became G51, and so on. In London the 1917 postal districts mapped directly to the new postcode districts. The remaining 60% of Greater London was allocated postcodes under the national plan.

GB postcodes available as Open data

Prior to 1 April 2010 the Royal Mail licensed use of the postcode database for a charge of about £4000 per year.[21] Following a campaign and a government consultation in 2009[22] the Ordnance Survey released Code-Point Open, detailing every postcode in Great Britain together with a geo-code for re-use free of charge under an attribution-only licence Open Government Licence as part of OS OpenData.


Template:Postcode areas imagemap The postcodes are alphanumeric and between five and eight characters long, plus a single space separating the outward and inward parts of the code. Each postcode unit generally represents a street, part of a street, or a single address.

The 'outward' part identifies first the postcode area, using one or two letters (for example L for Liverpool, RH Redhill and EH Edinburgh). A postal area may cover a wide area, for example RH covers north Sussex, which has little to do with Redhill historically apart from the railway links, and Belfast (BT) covers the whole of Northern Ireland. These letter(s) are followed by one or two digits (and sometimes a final letter) to identify the appropriate postcode district (for example W1A, RH1, RH10 or SE1P). All, or part, of one or more postcode districts are grouped into post towns.[23] Larger post towns may use more than one district, – for example Crawley uses both RH10 and RH11. In a minority of cases a single number can cover two post towns - for example, the WN8 district includes Wigan and Skelmersdale post towns. Some 'non-geographic' outward codes are used for purposes that are not associated with any particular location.

The 'Inward' is used to assist with the delivery of post within a postal district. The first character is a number denoting a 'sector' and the final two letters identify the postcode unit, which may be a group of properties, a single property, a sub-section of the property, an individual organisation or (for instance Driver and Vehicle Licensing Agency) a subsection of the organisation.[24] The level of discrimination is often based on the amount of mail received by the premises or business.

The term "postcode district" is ambiguous in common usage, as it may refer either collectively to all the alphabetical and non-alphabetical parts in a (former) district, or only to one such part. For example, a reference to N1 might be intended either to include or to exclude N1C and N1P, depending on context, and N1C might be said to be a district or (loosely) part of the N1 district.


The format is as follows, where A signifies a letter and 9 a digit:

Format Coverage Example
AA9A 9AA WC postcode area; EC1–EC4, NW1W, SE1P, SW1 EC1A 1BB
A9A 9AA E1W, N1C, N1P, W1 W1A 1HQ
A9 9AA B, E, G, L, M, N, S, W M1 1AA
A99 9AA B33 8TH
AA9 9AA All other postcodes CR2 6XH
AA99 9AA DN55 1PT


  • Areas with only single-digit districts: BR, FY, HA, HD, HG, HR, HS, HX, JE, LD, SM, SR, WC, WN, ZE.
  • Areas with only double-digit districts: AB, LL, SO.
  • Areas with a district '0' (zero): BL, BS, CM, CR, FY, HA, PR, SL, SS (BS is the only area to have both a district 0 and a district 10).
  • The following central London single-digit districts have been further divided by inserting a letter after the digit and before the space: EC1–EC4 (but not EC50), SW1, W1, WC1, WC2, and part of E1 (E1W), N1 (N1C and N1P), NW1 (NW1W) and SE1 (SE1P).
  • The letters QVX are not used in the first position.
  • The letters IJZ are not used in the second position.
  • The only letters to appear in the third position are ABCDEFGHJKPSTUW.
  • The only letters to appear in the fourth position are ABEHMNPRVWXY.
  • The final two letters do not use the letters CIKMOV, so as not to resemble digits or each other when hand-written.
  • Post code sectors use digits from 1 to 9 followed by 0 (the Royal Mail originally sorted sector 0 after 9, treating it as the 10th not the 1st sector label).

A postcode can be validated against a table of all 1.7 million postcodes in Code-Point Open. The full delivery address including postcode can be validated against the Royal Mail Postcode Address File (PAF) which lists 29 million valid delivery addresses,[25] constituting most (but not all) addresses in the UK.[26]

Special cases

Crown dependencies

The Channel Islands and the Isle of Man established their own postal administrations separate from the UK in 1969. Despite this they adopted the UK format postcodes, Guernsey in 1993 using GY, the Isle of Man the same year using IM, and Jersey in 1994 using JE.[27]

Overseas territories

Some of the UK's overseas territories have their own postcodes:

Postcode Location
AI-2640 Anguilla[28]

Saint Helena:
Ascension Island
Saint Helena
Tristan da Cunha[29]
BBND 1ZZ British Indian Ocean Territory
BIQQ 1ZZ British Antarctic Territory
FIQQ 1ZZ Falkland Islands
GX11 1AA[30] Gibraltar
PCRN 1ZZ Pitcairn Islands
SIQQ 1ZZ South Georgia and the South Sandwich Islands
TKCA 1ZZ Turks and Caicos Islands[31]

These were introduced because mail was often sent to the wrong place, e.g., for St Helena to St Helens, Merseyside[32] and Ascension Island to Asunción, Paraguay, and, many online companies would not accept addresses without a postcode. Mail from the UK continues to be treated as international, not inland, and sufficient postage must be used. Royal Mail's Heathrow centre collects all live underpaid mail for surcharging, and there is a reciprocal arrangement with postal services around the world to collect. An agreed payment based on volumes is made, year on year. Other forms of postage are collected at local mail centres, but Heathrow collects those that still get forwarded to them. Bermuda, the UK's most populous remaining overseas territory, has developed its own postcode system, with unique postcodes for street and PO Box addresses,[33] as have the Cayman Islands[34] and the British Virgin Islands.[35] Montserrat and Gibraltar do not have postcodes, although a system has been under consideration in Gibraltar.[36] Postcodes are not used in the Turks and Caicos Islands and the TKCA 1ZZ designation is generally unknown.

British Forces Post Office (BFPO)

The British Forces Post Office (BFPO) provides a postal service to HM Forces separate from that provided by Royal Mail in the United Kingdom, with BFPO addresses used for the delivery of mail in the UK and around the world. BFPO codes such as "BFPO 801" serve the same function as postal codes for civilian addresses, with the last line of the address consisting of "BFPO" followed a space and a number of 1 to 4 digits.

For consistency with the format of other UK addresses, in 2012 BFPO and Royal Mail jointly introduced an optional alternative postcode format for BFPO addresses, using the new non-geographic postcode area "BF" and the notional post town "BFPO". Each BFPO number is assigned to a postcode in the standard UK format, beginning "BF1". The database was released commercially in March 2012 as part of the Royal Mail Postal Address File (PAF).[37][38] A postcode is not required if the traditional "BFPO nnnn" format is used.

Non-geographic codes

Most postcodes apply to a geographic area but some are used only for routing and cannot be used for navigation or distance-finding.[39] They are often used for direct marketing and PO boxes. Some postcode sectors or districts are set aside solely for non-geographic postcodes, including EC50, BS98, BT58, IM99, M60, N1P, NE99, SW99 and JE4.

Girobank's headquarters in Bootle uses the non-geographic postcode GIR 0AA. Non-geographic postcode area BX is used solely for non-geographic addresses, with codes independent of the location of the recipient. Prominent users include Lloyds TSB[40] and HM Revenue and Customs.[41] There is a special postcode for letters to Father Christmas, SAN TA1.[42]

Special postcodes

Postcodes are allocated by Royal Mail's Address Management Unit and cannot be purchased or specified by the recipient. However, Royal Mail sometimes assigns semi-mnemonic postcodes to high profile organisations.[43]

Examples include:

Postcode Organisation[44]
BS98 1TL TV Licensing[45]
BX1 1LT Lloyds TSB Bank[46] – non-geographic address
BX2 1LB Bank of Scotland (part of Lloyds Banking Group)[47] – non-geographic address
BX3 2BB Barclays Bank[48] – non-geographic address
BX5 5AT VAT Central Unit of HM Revenue and Customs[49] (roman numeral "VAT" = "5AT") – non-geographic address
CF10 1BH Lloyds Banking Group (formerly Black Horse Finance)
CF99 1NA National Assembly for Wales
DE99 3GG Egg Banking
DH98 1BT British Telecom
DH99 1NS National Savings certificates administration
E16 1XL ExCeL London[50]
E20 2AQ Olympic Aquatics Centre
E20 2BB Olympic Basketball Arena
E20 2ST Olympic Stadium
E20 3BS Olympic Broadcast Centre
E20 3EL Olympic Velodrome
E20 3ET Olympic Eton Manor Tennis Courts
E20 3HB Olympic Handball Arena
E20 3HY Olympic Hockey Stadium
E98 1SN The Sun newspaper
E98 1ST The Sunday Times newspaper
E98 1TT The Times newspaper
EC2N 2DB Deutsche Bank
EC4Y 0HQ Royal Mail Group Ltd headquarters
EH99 1SP Scottish Parliament[51]
G58 1SB National Savings Bank (the district number 58 also approximates the outline of the initials SB)
GIR 0AA Girobank (now Santander Corporate Banking)
IV21 2LR Two Lochs Radio
L30 4GB Girobank (alternative geographic postcode)
LS98 1FD First Direct bank
N1 9GU The Guardian newspaper
N81 1ER Electoral Reform Services[39][52]
NG80 1EH Experian Embankment House
NG80 1LH Experian Lambert House
NG80 1RH Experian Riverleen House
NG80 1TH Experian Talbot House
PH1 5RB Royal Bank of Scotland Perth Chief Office
S2 4SU Sheffield United Football Club
S6 1SW Sheffield Wednesday Football Club
SE1 8UJ Union Jack Club
SN38 1NW Nationwide Building Society
SW1A 0AA House of Commons
SW1A 0PW House of Lords (Palace of Westminster; see above for House of Commons)
SW1A 1AA Buckingham Palace (the Monarch)
SW1A 2AA 10 Downing Street (the Prime Minister)
SW1P 3EU European Commission and European Parliament office (European Union)
SW1W 0DT The Daily Telegraph newspaper
TW8 9GS GlaxoSmithKline
W1A 1AA BBC Broadcasting House
W1D 4FA Betgenius, the former address of The Football Association
W1N 4DJ BBC Radio 1 (disc jockey)
W7 1DR Hanwell Health Centre



Postcodes are used to sort letters to their destination either manually, where sorters use labelled frames, or increasingly with letter-coding systems, where machines assist in sorting.[53] A variation of automated sorting uses optical character recognition (OCR) to read printed postcodes, best suited to mail that uses a standard layout and addressing format.[54]

A long string of "faced" letters (i.e. turned to allow the address to be read) is presented to a keyboard operator at a coding desk, who types the postcodes onto the envelopes in coloured phosphor dots. The associated machine uses the outward codes in these dots to direct bundles of letters into the correct bags for specific delivery offices. With a machine knowledge of the specific addresses handled by each postal walk at each office, the bundles can be further sorted using the dots of the inward sorting code so that each delivery round receives only its own letters.[55] This feature depends upon whether or not it is cost effective to second-sort outward letters, and tends to be used only at main sorting offices where high volumes are handled.[53] When postcodes are incomplete or missing, the operator reads the post town name and inserts a code sufficient for outward sorting to the post town where others can further direct it. The mail bags of letter bundles are sent by road, air or train, and eventually by road to the delivery office.[53] At the delivery office the mail that is handled manually is inward sorted to the postal walk that will deliver it, and it is then "set in", sorted into the walk order that allows the deliverer the most convenient progress in the round.[53][55] The latter process is now being automated, as the rollout of walk sequencing machines continues.[56][57]

Integrated Mail Processors

Integrated Mail Processors (IMPs) read the postcode on the item and translate it into two phosphorous barcodes, unique to the inward and outward parts of the postcode, which the machines subsequently print and read, to sort the mail to the correct outward postcode. Letters may also be sequentially sorted by a CSS machine reading the outward postcode, in the order that a walking postman/woman will deliver, door to door. On such items the top phosphorous barcode is the inward part of the code, the bottom is the outward.

IMPs can also read RM4SCC items, as used in Cleanmail, a different format to the above.


A newer system of five-digit codes called Mailsort has been designed for users who send 'a minimum of 4,000 letter-sized items.'[58] It encodes the outward part of the postcode in a way that is useful for mail routing, so that a particular range of Mailsort codes goes on a particular plane or lorry. Mailsort users are supplied with a database to allow them to convert from postcodes to Mailsort codes and receive a discount if they deliver mail to the post office split up by Mailsort code. Users providing outgoing mail sorted by postcode receive no such incentive since postcode areas and districts are assigned using permanent mnemonics, and do not therefore assist with grouping items together into operationally significant blocks.

Licensing and availability

Life-cycle of post codes

There are also significant numbers of discontinued (terminated) codes. Each month some 2,750 postcodes are created and 2,500 terminated.[59]

Component Part Example Live codes[60] Terminated codes[61] Other codes Total
Postcode area Out code YO 124 0 3 127
Postcode district Out code YO31 2,971 103 4 3,078
Postcode sector In code YO31 1 10,631 1,071 4 11,706
Postcode unit In code YO31 1EB 1,762,464[61] 650,417 4 2,412,885
Postcode Addresses Approx. 27,000,000[62]

Postcode Address File (PAF)

The Postcode Address File (PAF) is commercially licenseable and is often incorporated in address management software packages. The capabilities of such packages allow most addresses to be constructed solely from the postcode and house number. By including the map references of postcodes in the address database, the postcode can be used to pinpoint a postcode area on a map. PAF is updated monthly.

Code-Point Open

Since 1 April 2010 an Ordnance Survey geo-coded file containing every postcode in Great Britain has been available for re-use without charge under an attribution-only licence, as part of OS OpenData.

Other uses of postcodes

While postcodes were introduced to expedite the delivery of mail, they are useful tools for other purposes, particularly because codes are very fine-grained and identify just a few addresses. Among uses are:

  • Finding the nearest branch of an organisation to a given address. A computer program uses the postcodes of the target address and the branches to list the closest branches in order of distance as the crow flies (or, if used in conjunction with streetmap software, by road distance). This can be used by companies to inform potential customers where to go, by job centres to find jobs for job-seekers, to alert people of town planning applications in their area, and a great many other applications.[21]
  • With satellite navigation systems, to navigate to an address by street number and postcode.
  • By non-life insurance companies to assess premiums for motoring/business/domestic policy premiums.
  • By life insurance companies and pension funds to assess longevity for pricing and reserving.[63]

See also


External links

  • Royal Mail has two ways to search addresses or postcodes from its website, allowing up to 15 searches a day free of charge (these cover nearly all UK and crown dependency postcodes but not the non-geographic BX postcode area nor "GIR 0AA"):
    • Royal Mail's Online Postcode Finder (for the postcode for a specified street or address)
    • Royal Mail's Online Address Finder (for addresses covered by a specified postcode)
  • BFPO Locations (BFPO locations, numbers and postcodes)
  • Beacon Dodsworth: Postcode updates
  • Universal Postal Union: United Kingdom of Great Britain and Northern Ireland
  • Free Postcode Lookup (Free street level postcode API provider, using own in-house database)
  • Information on Royal Mail Postcode Address File
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.